Lantronix LSW2F8 - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents CHAPTER 1. Introduction 1.1 Product Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.3 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . ....

Page 3 - CHAPTER 1 Introduction; Product Introduction

CHAPTER 1 Introduction 1.1 Product Introduction Congratulations on your purchase of the Lantronix 10/100Mbps 10-port or 18-port switch. The LSW2F8 and LSW2F16 10/100 EthernetSwitches are designed to give you the ultimate in performance, flexibil-ity, ease-of-use, and reliability. The LSW 10/100 swit...

Page 5 - Product Specifications

1.3 Product Specifications Standards IEEE 802.3 10BASE-T EthernetIEEE 802.3u 100BASE-TX Fast Ethernet Architecture Store and forward switching Connectors LSW2F8 8x10BASE-T/2 100BASE-TX (RJ-45) Fast Ethernet ports LSW2F16 16x10BASE-T/2 100BASE-TX (RJ-45) Fast Ethernet ports Uplink ports Push button t...

Page 6 - Chapter 2 Using the LSW Switch; Packing Checklist; Your switch product package should contain the following:; Planning Your Network

5 Chapter 2 Using the LSW Switch 2.1 Packing Checklist Your switch product package should contain the following: ✓ An LSW2F8 or LSW2F16 10/100 Ethernet Switch ✓ One AC Power Cable ✓ Four self-adhesive standoffs ✓ Rackmount brackets and screws ✓ Installation Guide If any of these items are missing, c...

Page 7 - Figure 2-1 Fileserver Link Application; Hub

6 2.2.1 Fileserver Link The LSW switch can be used to greatly increase the bandwidth betweenone or more fileservers and the workgroups they serve. Individual10Mbps workgroup switches can be connected to the ports on the LSWswitch, ensuring that traffic in one workgroup will not interfere withthe per...

Page 8 - Figure 2-2 Collapsed Backbone Application; Fileserver

2.2.2 Backbone Link Traditionally, bridges and routers have been used to link individuallocal area networks into an interconnected network. Routers and tradi-tional bridges introduce relatively large delays when forwarding trafficfrom one network to another, in addition to being difficult to manage....

Page 11 - Figure 2-6 Mounting Bracket Installation

10 2.4 Mounting Your LSW2F8 or LSW2F16 switch is delivered with two brackets formounting the switch in an EIA standard 19-inch rack. Secure themounting brackets onto the sides of the LSW switch, fastening themwith screws as shown in Figure 2-6. Figure 2-6 Mounting Bracket Installation If your site u...

Page 12 - Connecting the LSW Switch

11 2.5 Connecting the LSW Switch Use the following procedures to connect 10BASE-T or 100BASE-TX net-work devices to the LSW switch: The following table describes the two cable types: Make sure that the length of the straight-through cable between theswitch and the other device does not exceed 100 me...

Page 13 - Chapter 3 LED Indicators; Figure 3-1 LSW2F16 Front Panel LED Indicators; is used to indicate that the

Chapter 3 LED Indicators Figure 3-1 shows the LED indicators, which indicate the link status ofeach of the ports, whether the LSW switch is receiving power, and thepresence of network activity and collisions on the network. Figure 3-1 LSW2F16 Front Panel LED Indicators 3.1 Power LED The LED on the f...

Page 16 - NOTE: The RJ45 ports are not for telephone use.

WARNING! This device complies with part 15 of the FCC rules. Operation is subjectto the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including that which may cause undesired operation. Operation of thisequipment i...

Page 17 - Declaration of Conformity

Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer Õs Name: Lantronix Manufacturer Õs Address: 15353 Barranca Parkway Irvine, CA 92618 USA declares, that the product: Product Name: 10/100 Ethernet Switches Model Number: LSW2F8, LSW2F16 conforms to the following stand...