Lantronix 900-691-R - Manuals

xPico® Wi-Fi® Embedded Device Server User Guide 5 To View HTTP Status ___________________________________________________ 47 9: Maintenance and Diagnostics Settings 48 File System Settings _______________________________________________________ 48 File System Statistics _____________________________...

xPico® Wi-Fi® Embedded Device Server User Guide 6 Path Format __________________________________________________________ 66Other Overridable Files _________________________________________________ 67 13: Updating Firmware 68 Obtaining Firmware ________________________________________________________...

xPico® Wi-Fi® Embedded Device Server User Guide 7 End Product Labeling __________________________________________________ 108Manual Information To the End User ______________________________________ 108 Industry Canada Statement ________________________________________________ 108 Radiation Exposure...

xPico® Wi-Fi® Embedded Device Server User Guide 8 List of Figures Figure 2-1 xPico Wi-Fi Product Label ________________________________________________ 16 Figure 3-1 Status Page ____________________________________________________________ 18 Figure 3-2 Components of the Web Manager Page ____________...

xPico® Wi-Fi® Embedded Device Server User Guide 9 List of Tables Table 3-3 Web Manager Pages _____________________________________________________ 20 Table 4-1 Network Interface Settings _________________________________________________ 21 Table 4-2 Network 1 (ap0) Link Settings ____________________...

xPico® Wi-Fi® Embedded Device Server User Guide 11 1: Using This Guide Purpose and Audience This guide provides the information needed to configure, use, and update the xPico® Wi-Fi® embedded device server. It is intended for software developers and system integrators who are embedding this product ...

1: Using This Guide xPico® Wi-Fi® Embedded Device Server User Guide 12 Additional Documentation Visit the Lantronix Web site at www.lantronix.com/support/documentation for the latest documentation and the following additional documentation. Document Description xPico Wi-Fi Embedded Device Server Int...

xPico® Wi-Fi® Embedded Device Server User Guide 13 2: Introduction This chapter summarizes the basic information and features of the xPico Wi-Fi embedded device server. Key Features  Wireless LAN Interface: - IEEE 802.11 b/g and IEEE 802.11n (single stream) - WLAN interface (2.4 GHz only) - IEEE 80...

2: Introduction xPico® Wi-Fi® Embedded Device Server User Guide 14 - CLI (Serial Monitor Port) - XML Configuration Import and Export (XCR, XML Status Export [XSR]) - WebAPI - Field upgradable firmware (OTA) - Power Management Framework - OEM Support Kit - Simple Customization and device configuratio...

2: Introduction xPico® Wi-Fi® Embedded Device Server User Guide 15 Configuration Methods After installation, the xPico Wi-Fi embedded device server requires configuration. For the unit to operate correctly on a network, it must have a unique IP address on the network. These methods may be used for l...

xPico® Wi-Fi® Embedded Device Server User Guide 17 3: Configuration Using Web Manager This chapter describes how to configure the xPico Wi-Fi embedded device server using Web Manager, the Lantronix browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory and is reta...

3: Configuration Using Web Manager xPico® Wi-Fi® Embedded Device Server User Guide 18 Status Page The Status page is the first to appear after you log into Web Manager. The Status page also appears when you click Status tab in Web Manager. Figure 3-1 Status Page

3: Configuration Using Web Manager xPico® Wi-Fi® Embedded Device Server User Guide 19 Web Manager Components The layout of a typical Web Manager page is below. Figure 3-2 Components of the Web Manager Page Navigating Web Manager The Web Manager provides an intuitive point-and-click interface. A menu...

xPico® Wi-Fi® Embedded Device Server User Guide 21 4: Network Settings The Network Settings show the status of the Software enabled Access Point (SoftAP) or WLAN interface/link and let you configure the settings on the device. Interface settings are related to the configuration of the IP and related...

4: Network Settings xPico® Wi-Fi® Embedded Device Server User Guide 22 To View Network 1 Interface Status Using Web Manager In Network Interface Status, you can view both the current operational settings as well as the settings that would take effect upon a device reboot.  To view current access po...

4: Network Settings xPico® Wi-Fi® Embedded Device Server User Guide 23 To Configure Network 1 Link Settings Using Web Manager  To modify network (ap0) Link information, click Network on the menu and select apo > Link > Configuration . Using CLI  To enter the Access Point command level: confi...

4: Network Settings xPico® Wi-Fi® Embedded Device Server User Guide 24 Network 2 (wlan0) Interface Configuration This page is used to configure the network 2 interface on the device. To see the effect of these items after a reboot, view the Status page. Table 4-3 Network Interface Settings To Config...

4: Network Settings xPico® Wi-Fi® Embedded Device Server User Guide 25 Using XML  Include in your file: <configgroup name = "Interface" instance = "wlan0"> To View Network 2 Interface Status Using Web Manager In Network Interface Status, you can view both the current operation...

4: Network Settings xPico® Wi-Fi® Embedded Device Server User Guide 26 WLAN Profile WEP Settings WEP is a simple and efficient security mode encrypting the data via the RC4 algorithm. However, WEP has become more vulnerable due to advances in hacking technology. State of the art equipment can find W...

4: Network Settings xPico® Wi-Fi® Embedded Device Server User Guide 28 Table 4-7 WLAN Profile Advanced Settings WLAN Quick Connect WLAN QuickConnect allows users to view and add up to four WLAN profiles from a list of up to 20 wireless devices sorted by RSSI. Details of the selected network are pre-...

xPico® Wi-Fi® Embedded Device Server User Guide 30 5: Interface Settings Line Settings The Line Settings allow configuration of the serial lines (ports). Some settings may be specific to only certain lines. Such settings are noted below. Note: The settings described below apply to both Line 1 and Li...

5: Interface Settings xPico® Wi-Fi® Embedded Device Server User Guide 31 To Configure Line Settings Note: The following section describes the steps to view and configure Line 1 settings; these steps apply to other line instances of the device. Using Web Manager  To configure a specific line, click ...

5: Interface Settings xPico® Wi-Fi® Embedded Device Server User Guide 32 Serial Perpheral Interface (SPI) Settings SPI settings pertaining to the bus master device can be modified in the xPico Wi-Fi unit. SPI settings, like line settings, allow for the selection of a protocol to be used with SPI. Ch...

5: Interface Settings xPico® Wi-Fi® Embedded Device Server User Guide 33 To View SPI Status Using Web Manager  To view the current status and statistics for the SPI bus master device, click SPI in the menu and select Status . Using CLI  To enter the SPI command level: status -> SPI Using XML  ...

xPico® Wi-Fi® Embedded Device Server User Guide 34 6: Tunnel Settings The xPico Wi-Fi embedded device server has two lines available for tunneling. Tunnel Settings Tunneling allows serial devices to communicate over a network, without “being aware” of the devices which establish the network connecti...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 35 Packing Mode With Packing, data from the serial Line is not sent over the network immediately. Instead, data is queued and sent in segments, when either the timeout or byte threshold is reached. Packing applies to both Accept and ...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 36 To Configure Tunnel Packing Mode Settings Using Web Manager  To configure the Packing mode for a specific tunnel, click Tunnel in the menu and select Tunnel 1 -> Packing . Using CLI  To enter the Tunnel command level: config ...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 37 To Configure Tunnel Accept Mode Settings Using Web Manager  To configure the Accept Mode for a specific tunnel, click Tunnel in the menu and select Tunnel 1 -> Accept . Using CLI  To enter the Tunnel command level: config -&g...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 38 Using XML  Include in your file: <configgroup name = "Tunnel Accept" instance = "1"> Connect Mode Specifies the conditions for connecting any Accept Mode connection that may be established locally. Table 6-4...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 39 To Configure Tunnel Connect Mode Settings Using Web Manager  To configure the Disconnect Mode for a specific tunnel, click Tunnel in the menu and select Tunnel 1 -> Connect . Using CLI  To enter the Tunnel command level: conf...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 40 To Configure Tunnel Disconnect Mode Settings Using Web Manager  To configure the Disconnect Mode for a specific tunnel, click Tunnel in the menu and select Tunnel 1 -> Disconnect . Using CLI  To enter the Tunnel command level...

6: Tunnel Settings xPico® Wi-Fi® Embedded Device Server User Guide 41 Using Web Manager  To configure the modem emulation for a specific tunnel, click Modem Emulation in the menu and select Modem Emulation 1 -> Configuration .  To view the modem emulation status for a specific tunnel, click Mod...

xPico® Wi-Fi® Embedded Device Server User Guide 43 7: Configurable Pin Manager The Configurable Pin Manager (CPM) is responsible for the assignment and control of the configurable pins (CPs) available on the xPico Wi-Fi embedded device server. There are eight configurable pins on the xPico Wi-Fi uni...

7: Configurable Pin Manager xPico® Wi-Fi® Embedded Device Server User Guide 44 Note: To modify a CP, all roles in which it is a member must be disabled. Note: The changes to a CP configuration are not saved in FLASH. Instead, these CP settings are used when the CP is added to a CP Role. When the CP ...

7: Configurable Pin Manager xPico® Wi-Fi® Embedded Device Server User Guide 45 Table 7-3 Role Configuration To Configure CPM Settings Using Web Manager  To view or configure a configurable pin, click CPM in the menu, select CPs then the Detail link to the right of a specific CP to configure.  To c...

xPico® Wi-Fi® Embedded Device Server User Guide 46 8: Services Settings HTTP Settings Hypertext Transfer Protocol (HTTP) is the transport protocol for communicating hypertext documents on the Internet. HTTP defines how messages are formatted and transmitted. It also defines the actions web servers a...

8: Services Settings xPico® Wi-Fi® Embedded Device Server User Guide 47 To View HTTP Status Using Web Manager  To view HTTP status, click HTTP in the menu and select Status . Using CLI  To enter the HTTP Server command level: status -> HTTP Server> Using XML  Look for the status header: <...

xPico® Wi-Fi® Embedded Device Server User Guide 48 9: Maintenance and Diagnostics Settings File System Settings The xPico Wi-Fi embedded device server uses a flash file system to store files. The file system can be formatted and compacted: formatting erases all files while preserving configuration, ...

9: Maintenance and Diagnostics Settings xPico® Wi-Fi® Embedded Device Server User Guide 49 Using XML  Not applicable. File Manipulation The xPico Wi-Fi embedded device server allows for files to be deleted, moved, renamed, and uploaded via HTTP. Directories can be created, deleted, moved, and renam...

9: Maintenance and Diagnostics Settings xPico® Wi-Fi® Embedded Device Server User Guide 50 Note: Go to Chapter 13: Updating Firmware for directions on uploading new firmware. To Save Configuration, Reboot, Restore Factory Defaults or Upload Firmware Using Web Manager  To access the area with option...

9: Maintenance and Diagnostics Settings xPico® Wi-Fi® Embedded Device Server User Guide 51 Diagnostics Settings The xPico Wi-Fi embedded device server has tools for diagnostics and statistics. Options allow for the viewing of hardware, IP sockets, threads, and buffer pools. To View Hardware Status U...

xPico® Wi-Fi® Embedded Device Server User Guide 52 10: Advanced Settings XML Import and XML Export The xPico Wi-Fi embedded device server allows for the configuration of devices by using XML configuration records (XCRs). You can export an existing configuration for use on other xPico Wi-Fi devices o...

10: Advanced Settings xPico® Wi-Fi® Embedded Device Server User Guide 53 --------------------------------- ----------------------------------a move cursor to begin of line b move cursor backward wordd delete character under cursor f move cursor forward worde move cursor to end of line [A previous co...

10: Advanced Settings xPico® Wi-Fi® Embedded Device Server User Guide 54 To Configure Performance Using Web Manager  To modify performance settings, click Performance in the menu. Using CLI  To enter the Performance command level: config -> Performance Using XML  Include in your file: <conf...

xPico® Wi-Fi® Embedded Device Server User Guide 55 11: Monitor The Monitor feature can be used to query and capture desired information during an xPico Wi-Fi serial port to serial device connection. Monitor Settings Through the Monitor feature in Web Manager, you may configure the monitoring of a co...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 57 Configuration Configure the monitoring of a connected serial device through specific configuration settings pages : Initialization, Control, Poll , Filter, and Data. Access the configuration options displayed in Table 11-2 on the Initial...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 58 Access the configuration options displayed in Table 11-4 on the Poll page. These configuration fields are the same ones in Step 3: Define Filters if utilizing Explorer. Table 11-4 Monitor Poll Settings Access the configuration options di...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 59 Access the configuration options displayed in Table 11-6 on the Data page. These configuration fields are the same ones in Step 4: Pick Data if utilizing Explorer. Table 11-6 Monitor Data Settings To Configure Monitor The easiest way to ...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 60 Example: Data Capture on a Serial Device Connect the xPico Wi-Fi serial port to a serial device, then query and capture desired information periodically, presenting this information on a Web page. Sample Configuration  Connect to the Co...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 61 Polling Periodically your xPico Wi-Fi will send commands to query information from your serial device. STEP 1 - STRATEGY Explore your serial device and determine your strategy for eliciting all of the desired data with the fewest message...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 62 Filtering The response to each poll will be sliced up according to your filter rules. The objective is to simply slice enough so you can subsequently point to the data fields you want to mine. Note the raw data in the grey box above; it ...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 63 Note: Some devices might use a variable number of lines to display status depending on the device state. If so, slicing first by lines will not consistently point to the desired data. Instead, consider a different strategy:  Rule 1 can ...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 64 Presenting STEP 1 - STRATEGY Here you consider your options for sharing the data you have mined. For human users, a Web page presentation is simplest. For machine-to-machine communication, XML might be best. Command Line could be used fo...

11: Monitor xPico® Wi-Fi® Embedded Device Server User Guide 65 Figure 11-16 Monitor XML Commands  For XML we start at the root Command Line Interface, type "xml", then "xsr dump monitor". We see a statusitem name = "data", instance = "Up time", with value containing ...

xPico® Wi-Fi® Embedded Device Server User Guide 66 12: Branding the xPico Wi-Fi Unit This chapter describes how to brand the Web Manager user interface of your xPico Wi-Fi embedded device server. Web Manager Customization Changing the Presentation You can customize the Web Manager's appearance by mo...

12: Branding the xPico Wi-Fi Unit xPico® Wi-Fi® Embedded Device Server User Guide 67 Note: This path schema is subject to change in the future. Other Overridable Files In addition to index.html, and style.css, a few other presentation-related files can be overridden. The complete list is as follows:...

xPico® Wi-Fi® Embedded Device Server User Guide 68 13: Updating Firmware Obtaining Firmware Obtain the most up-to-date firmware and release notes for the unit from the Lantronix Web site ( www.lantronix.com/support/downloads/ ) or by using anonymous FTP ( ftp://ftp.lantronix.com/ ). Loading New Firm...

13: Updating Firmware xPico® Wi-Fi® Embedded Device Server User Guide 69 5. Select the file and click Open . 6. Click Upgrade to install the firmware on the xPico Wi-Fi embedded device server. 7. Click OK in the confirmation pop-up which appears. The firmware will be installed and the device will au...

xPico® Wi-Fi® Embedded Device Server User Guide 70 Appendix A: Command Reference The xPico Wi-Fi embedded device server supports three convenient configuration methods: Web Manager, Command Line Interface (CLI) and Extensible Markup Language (XML). This appendix describes how to configure the xPico ...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 71 Configuration Using Serial Port Serial Command Mode The serial port can be configured to operate in command mode permanently or to be triggered under specified conditions. See the line <line> Level command descrip...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 72 Navigating the CLI Hierarchy The CLI is organized into a hierarchy of levels. Each level has a group of commands for a specific purpose. For example, to view diagnostic or device status, one would navigate to the status...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 73 Understanding the CLI Level Hierarchy The CLI hierarchy is a series of levels. Arranging commands in a hierarchy of levels provides a way to organize and group similar commands, provide different levels of security, and...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 74 parameters for a xPico Wi-Fi embedded device server, or it may only change the baud rate for a single serial line. Using XCRs is a straightforward and flexible way to manage the configuration of multiple XPico Wi-Fi emb...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 75  An empty or missing <value> element in each present <configgroup> clears the setting to its default. Quick Tour of XML Syntax Declaration The first line, <?xml version="1.0" standalone="yes&...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 77 XML for xPicoWi-Fi Embedded Device Server configgroup Access Point These settings pertain to the Access Point in the device. Changes will take effect after reboot. configitem SSID value The default value of SSID is Xpic...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 78 value CP This is the number of the Configurable Pin ( CP ) assigned to the role. Enter blank or 0 to revert to <No CP Selected>. Blank the value for "<No CP Selected>". value State The Enabled State ...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 79 configitem Access Control value URI The URI must begin with / to refer to the file system. URI may contain up to 255 characters. value AuthType The different AuthType values offer various levels of security. From the le...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 80 configitem IP Address valueIP Address may be entered alone, in CIDR form, or with an explicit mask: 192.168.1.1 (default mask)192.168.1.1/24 (CIDR)192.168.1.1 255.255.255.0 (explicit mask)The IP Address will be displaye...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 82 configitem Stop Bits valueStop Bits may be "1" or "2". configitem Flow Control valueFlow Control may be "None", "Hardware" or "Software". configitem Xon Char value When specifying...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 83 Instance may contain up to 32 characters. value StateEnable the State to allow the named Application to hold power on. State may be "Enabled" or "Disabled". configitem Maximum Time Powered Down valueMaxi...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 84 configitem Target Speed valueTarget Speed selects the target clock speed of the SPI. The Target Speed may be lowered to the closest Operating Speed capability of the device. If so, a warning will be noted. 0 or clearing...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 85 configitem Instance valueInstance may contain up to 16 characters. configitem Password valuePassword may contain up to 32 characters. The value is HIDDEN. configgroup WLAN Profile These settings pertain to a WLAN Profil...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 86 The value is HIDDEN. value WPAx Key TypeKey Type may be "Passphrase" or "Hex". value WPAx PassphrasePassphrase may contain up to 63 characters. The value is HIDDEN. value WPAx KeyKey may contain up to 32...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 87 configitem WLAN Profile delete value namename may contain up to 35 characters. configgroup Modem Emulation Connections can be initiated and accepted using Modem "AT" commands incoming from the Serial Line. confi...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 88 configitem Incoming Connection valueIncoming Connection requests may be disabled (ATS0=0), answered automatically (ATS0=1), or answered manually via the ATA command after an incoming RING (ATS0=2 or higher). Incoming Co...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 89 \10 (decimal) End Character may contain one character, where <control>J, for example, counts as one. value Length Sets the Length of response. Response is ended by any configured End Character , Length OR Timeout ...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 90 value Timeout Sets the Timeout to receive response. Minimum timeout is 100 milliseconds. Response is ended by any configured End Character , Length OR Timeout . Timeout has units of milliseconds. Blank the value for ...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 91 only once. Delay has units of seconds. configgroup Monitor Filter These settings pertain to Monitor Filter in the device. Filter settings will be applied to all received response. Filter results can be used to feed anot...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 92 configgroup Monitor Data These settings pertain to Monitor Data in the device. Data configured here will be accessible through the status of Monitor . configitem Selector value Name Sets Name to enable the data selector...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 93 configitem Protocol value The Protocol used on the connection can be TCP. Protocol may be "TCP". configitem Start Character value When the Start Character is received on the Serial Line, it enables the tunnel to...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 94 configitem Block Network valueBlock Network may be enabled for debugging purposes. If Enabled , incoming characters from the network will NOT be forwarded to the Serial Line. Instead, they will be buffered and will even...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 95 configgroup Tunnel Connect Tunnel Connect controls how a tunnel behaves when a connection attempt originates locally. configitem Mode value A Connect Tunnel can be started in a number of ways, according to its Mode : Di...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 96 value Port The Host Port is required to enable a Connect Tunnel. It designates the TCP port on the remote host to connect to. Blank the value for "<None>". value Protocol The Protocol used on the connectio...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 97 configitem Block Network valueBlock Network may be enabled for debugging purposes. If Enabled , incoming characters from the network will NOT be forwarded to the Serial Line. Instead, they will be buffered and will even...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 98 configitem Flush Line valueFlush Line enabled will flush the Serial Line when the Tunnel is disconnected. Flush Line may be "Enabled" or "Disabled". configgroup Tunnel Packing When Tunneling, instead of ...

Appendix A: Command Reference xPico® Wi-Fi® Embedded Device Server User Guide 99 configitem Trailing Character value The Trailing Character is an optional single printable character or control character that is injected into the outgoing data stream right after the Send Character . Control character...

xPico® Wi-Fi® Embedded Device Server User Guide 100 Appendix B: WebAPI WebAPI is a cloud function API allowing access to configuration and status information of xPico Wi-Fi embedded device server through standard HTTP request. Export Status Group An HTTP POST request can be sent to the device to ret...

Appendix B: WebAPI xPico® Wi-Fi® Embedded Device Server User Guide 101 optionalBoolNeedSecret: To retrieve the original value for hidden configuration, set this to "true". CURL example: curl -u admin:PASSWORD http://172.19.100.125/export/config -X POSTcurl -u admin:PASSWORD http://172.19.100...

Appendix B: WebAPI xPico® Wi-Fi® Embedded Device Server User Guide 102 Import Configuration Group An HTTP POST request can be sent to the device to set configuration. Protocol: HTTP Method: Post Content-Type: multipart/form-data URL: http://<hostname>/import/config Parameters: configrecord: Co...

xPico® Wi-Fi® Embedded Device Server User Guide 103 Appendix C: Technical Support If you are unable to resolve an issue using the information in this documentation, please contact Technical Support. North America Hours: 6:00am - 5:00pm Pacific Time Mon. - Fri. (excluding holidays) www.lantronix.com/...

Appendix C: Technical Support xPico® Wi-Fi® Embedded Device Server User Guide 104 Latin America & Caribbean [email protected] Tel: +1 949 453 3990 Online Support options listed below are available 24 hours a day, 7 days a week at the Lantronix support page at http://www.lantronix.com/suppor...

xPico® Wi-Fi® Embedded Device Server User Guide 105 Appendix D: Compliance (According to ISO/IEC Guide and EN 45014) Manufacturer's Name & Address: Lantronix, Inc.167 Technology Drive, Irvine, CA 92618 USA Declares that the following product: Product Name Model: xPico® Wi-Fi® Embedded Device Ser...

Appendix D: Compliance xPico® Wi-Fi® Embedded Device Server User Guide 107 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) thi...

Appendix D: Compliance xPico® Wi-Fi® Embedded Device Server User Guide 108 IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID ca...

Appendix D: Compliance xPico® Wi-Fi® Embedded Device Server User Guide 110 Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisate...

xPico® Wi-Fi® Embedded Device Server User Guide 112 Appendix E: Binary to Hexadecimal Conversions Many unit configuration procedures require you to assemble a series of options (represented as bits) into a complete command (represented as a byte). The resulting binary value must be converted to a he...

Appendix E: Binary to Hexadecimal Conversions xPico® Wi-Fi® Embedded Device Server User Guide 113 Figure E-2 Windows Scientific Calculator 4. Click Hex . The hexadecimal value appears. Figure E-3 Hexadecimal Values in the Scientific Calculator