Lantronix 900-510 - Manuals

SLB™ Branch Office Manager User Guide 5 Connecting Devices to Power Outlets ___________________________________________ 26 Connecting Devices to the 8-Port Ethernet Switch _________________________________ 27 Typical Installations _____________________________________________________ 27 4: Quick Set...

SLB™ Branch Office Manager User Guide 7 Remote Access Server _____________________________________________________ 126 Reverse Terminal Server____________________________________________________ 127 Multiport Device Server _____________________________________________________ 127 Console Server ____...

SLB™ Branch Office Manager User Guide 8 13: Application Examples 206 Telnet/SSH to a Remote Device __________________________________________ 207 Dial-in (Text Mode) to a Remote Device ____________________________________ 208 Local Serial Connection to Network Device via Telnet _____________________...

SLB™ Branch Office Manager User Guide 9 Accessing the Bootloader _______________________________________________ 264 Bootload Commands___________________________________________________ 264 User Commands __________________________________________________________ 264 Administrator Commands __________...

SLB™ Branch Office Manager User Guide 10 1: About This Guide Purpose and Audience This guide provides the information needed to install, configure, and use the Lantronix® SLB™ branch office manager. The SLB branch office manager is for IT professionals who must remotely and securely configure and ad...

1: About This Guide SLB™ Branch Office Manager User Guide 11 Chapter Summary 12: Maintenance and Operation Provides instructions for upgrading firmware, viewing system logs and diagnostics, generating reports, and defining events. Includes information about web pages and commands used to shut down a...

SLB™ Branch Office Manager User Guide 12 2: Overview The SLB branch office manager enables IT System Administrators to manage remote servers and IT infrastructure equipment securely over the Internet. This innovative device combines the capabilities of the award-winning Lantronix® SLC™ console manag...

2: Overview SLB™ Branch Office Manager User Guide 13 Meets Needs of Branch Offices Designed to meet the specific needs of the remote branch office, the SLB branch office manager conserves rack space and reduces costs by enabling system administrators at a main corporate facility to manage the IT equ...

2: Overview SLB™ Branch Office Manager User Guide 14 Typical Equipment You can configure, administer, and manage IT equipment in a variety of ways, but most devices have one method in common: an RS-232 serial port, sometimes called a console, auxiliary, or management port. These ports are often acce...

2: Overview SLB™ Branch Office Manager User Guide 15 The SLB device also provides features such as convenient text menu systems, break-safe operation, port buffering (logging), remote authentication, and Secure Shell (SSH) access. Dial-up modem support ensures access when the network is not availabl...

2: Overview SLB™ Branch Office Manager User Guide 16 Figure 2-1. SLB 8 Front Figure 2-2. SLB 8 Back — 8 Device Ports, 4 Power Outlets, 8 Switch Ports; 1 AC Power Supply System Features The SLB firmware has the following basic capabilities:  Connects up to eight RS-232 serial consoles  Controls pow...

2: Overview SLB™ Branch Office Manager User Guide 17 Protocols Supported The SLB branch office manager supports the TCP/IP network protocol as well as:  SSH, Telnet, PPP, NFS, and CIFS for connections in and out of the SLB device  SMTP for mail transfer  DNS for text-to-IP address name resolution...

2: Overview SLB™ Branch Office Manager User Guide 18 Application Example The figure below is an example deployment. An SLB branch office manager is deployed in each branch office and an (optional) SLM management appliance at the main office. The branch offices are interconnected (always on) by VPN r...

2: Overview SLB™ Branch Office Manager User Guide 19 A system administrator, upon losing IP connectivity to a server, takes the following steps:  Views the server’s Ethernet interface state information provided by the SLB branch office manager.  If the Ethernet interface is faulty, connects to the...

2: Overview SLB™ Branch Office Manager User Guide 20 2 The max input/output current is de-rated to 16A when using the optional NEMA 5-20P (20A) cable (p/n SLPP012410-01, SLPP012510-01, SLPP012610-01). Serial Connections All devices attached to the device ports and the console port must support the R...

2: Overview SLB™ Branch Office Manager User Guide 21 Network Connections The SLB network interfaces are 10Base-T/100Base-TX connectors for use with a conventional Ethernet network. Use standard RJ45-terminated Category 5 cables. Network parameters must be configured before the SLB branch office mana...

SLB™ Branch Office Manager User Guide 22 3: Installation This chapter provides a high-level procedure for installing the SLB branch office manager followed by more detailed information about the SLB connections and power supplies. Caution: To avoid physical and electrical hazards, please be sure to ...

3: Installation SLB™ Branch Office Manager User Guide 23 Verify and inspect the contents of the SLB package using the enclosed packing slip or the table above. If any item is missing or damaged, contact your place of purchase immediately. Product Information Label The product information label on th...

3: Installation SLB™ Branch Office Manager User Guide 24 Relative Humidity Operating: 10% to 90% non-condensing Storage: 10% to 90% non-condensing Heat Flow Rate 68 BTU per hour Current measurement accuracy ± 12% 1 The max input/output current is de-rated to 12A when using the supplied NEMA 5-15P (1...

3: Installation SLB™ Branch Office Manager User Guide 25 Connecting to a Device Port You can connect any device that has a serial console port to a device port on the SLB branch office manager for remote administration. The console port must support the RS-232C interface. Note: Many servers must eit...

3: Installation SLB™ Branch Office Manager User Guide 26 see D: Adapters and Pinouts and our web site at www.lantronix.com/support and click Cable/Adapter Lookup on the Support menu. To connect a terminal: 1. Attach the Lantronix adapter to your terminal (use PN 200.2066A adapter) or your PC's seria...

3: Installation SLB™ Branch Office Manager User Guide 27 The status of the power outlets displays on the front panel LCD display as the default display. Connecting Devices to the 8-Port Ethernet Switch To connect devices to the unmanaged Ethernet switch: 1. Use the included 1Ft Ethernet patch cable ...

SLB™ Branch Office Manager User Guide 29 4: Quick Setup This chapter helps get the IP network port up and running quickly, so you can administer the SLB branch office manager using your network. To set up the network connections quickly, we suggest you do one of the following:  Use the front panel ...

4: Quick Setup SLB™ Branch Office Manager User Guide 30 Method Description Front panel LCD display and pushbuttons You manually assign the IP address and other basic network, console, and date/time settings. If desired, you can restore the factory defaults. Serial port login to command line interfac...

4: Quick Setup SLB™ Branch Office Manager User Guide 31 Note: Have your information handy as the display times out without accepting any unsaved changes if you take more than 30 seconds between entries. Any changes made to the network, console port, and date/time settings take effect immediately. Na...

4: Quick Setup SLB™ Branch Office Manager User Guide 32 Note: If you have connected Eth1 to the network, and Eth1 is able to acquire an IP address through DHCP, this IP address displays, followed by the letter [D]. Otherwise, the IP address displays as all zeros (000.000.000.000). 2. Press the Enter...

4: Quick Setup SLB™ Branch Office Manager User Guide 33 Restoring Factory Defaults To use the LCD display to restore factory default settings: 1. Press the right arrow button to move to the last option, Release . 2. Use the down arrow to move to the Restore Factory Defaults option. A prompt for the ...

4: Quick Setup SLB™ Branch Office Manager User Guide 34 4. To accept the defaults, select the Accept default Quick Setup settings checkbox in the top portion of the page and click the Apply button at the bottom of the page. Otherwise, continue with step 5. Note: Once you click the Apply button on th...

4: Quick Setup SLB™ Branch Office Manager User Guide 35 Eth 1 Settings Disabled: If selected, disables the network port. Default is Eth1 enabled. Obtain from DHCP: Acquires IP address, subnet mask, hostname and gateway from the DHCP server. (The DHCP server may not provide the hostname gateway, depe...

4: Quick Setup SLB™ Branch Office Manager User Guide 36 Administrator Settings Sysadmin Password/ Retype Password To change the password (e.g., from the default) enter a password of up to 64 characters. 6. To save your entries, click the Apply button.

4: Quick Setup SLB™ Branch Office Manager User Guide 37 Method #3 Quick Setup on the Command Line Interface If the SLB branch office manager does not have an IP address, you can connect a dumb terminal or a PC running a terminal emulation program (VT100) to access the command line interface. (See Co...

4: Quick Setup SLB™ Branch Office Manager User Guide 39 Figure 4-3. Completed Quick Setup 5. To logout, type logout at the prompt and press Enter . Next Step After quick starting the SLB branch office manager, you may want to configure other settings. You can use the web page or the command line int...

SLB™ Branch Office Manager User Guide 40 5: Web and Command Line Interfaces The SLB branch office manager offers three interfaces for configuring the SLB device: a command line interface (CLI), a web interface, and an LCD with pushbuttons on the front panel. This chapter discusses the web and comman...

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 42 Note: For specific instructions on completing the fields on the web pages, see Chapters 6 through 12. Apply Button: Apply on each web page makes the changes immediately and saves them so they will be there when the SLB branc...

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 43 Command Line Interface A command line interface (CLI) is available for entering all the commands you can use with the SLB branch office manager. In this user guide, after each section of instructions for using the web interf...

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 44 Command Syntax Commands have the following format: <action> <category> <parameter(s)> where <action> is set, show, connect, admin, diag, pccard, or logout. <category> is a group of related param...

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 45 Command Line Help For general Help and to display the commands to which you have rights, type: help For general command line Help, type: help command line For more information about a specific command, type help followed by ...

5: Web and Command Line Interfaces SLB™ Branch Office Manager User Guide 46 General CLI Commands The following commands relate to the CLI itself. To configure the current command line session: set cli scscommands <enable|disable> Allows you to use SCS-compatible commands as shortcuts for execu...

SLB™ Branch Office Manager User Guide 47 6: Basic Parameters This chapter explains how to set the following basic configuration settings for the SLB branch office manager using the SLB web interface or the CLI:  Network parameters that determine how the SLB interacts with the attached network  Fir...

6: Basic Parameters SLB™ Branch Office Manager User Guide 48 To enter settings for one or both network ports: 1. Click the Network tab and select the Network Settings option. The following page displays: 2. Enter the following information: Eth1 and Eth2 Settings Note: Configurations with the same IP...

6: Basic Parameters SLB™ Branch Office Manager User Guide 49 Eth 1 and/or Eth 2 Settings Disabled: If selected, disables the network port. Defaults are Eth1 and Eth2 enabled. Obtain from DHCP: Acquires IP address, subnet mask, hostname and gateway from the DHCP server. (The DHCP server may not provi...

6: Basic Parameters SLB™ Branch Office Manager User Guide 50 Gateway Default IP address of the router for this network. If this has not been set manually, any gateway acquired by DHCP for Eth1 or Eth2 displays. All network traffic that matches the Eth1 IP address and subnet mask is sent out Eth1. Al...

6: Basic Parameters SLB™ Branch Office Manager User Guide 51 Hostname & Name Servers Hostname The default host name is slbXXXX, where XXXX is the last 4 characters of the hardware address of Ethernet Port 1. There is a 64-character limit (contiguous characters, no spaces). The host name becomes ...

6: Basic Parameters SLB™ Branch Office Manager User Guide 52 Network Commands The following CLI commands correspond to the web page entries described above. To configure Ethernet port 1 or 2: set network port <1|2> <parameters> Parameters: mode <auto|10mbit-half|100mbit-half| 10mbit-f...

6: Basic Parameters SLB™ Branch Office Manager User Guide 53 To view all network settings: show network all To view Ethernet port settings and counters: show network port <1|2> To view DNS settings: show network dns To view gateway settings: show network gateway To view the host name of the SL...

6: Basic Parameters SLB™ Branch Office Manager User Guide 54 Enabling IP Filters On the IP Filter page, you can enable all filters or disable all filters. Note: There is no way to enable or disable individual filters. To enable IP filters: 1. Enter the following: Enable IP Filter Select the Enable I...

6: Basic Parameters SLB™ Branch Office Manager User Guide 55 To add an IP filter: 1. On the IP Filter page, click the Add Ruleset button. The following page displays: 2. Enter the following Ruleset Name Name that identifies a filter; may be composed of letters, numbers, and hyphens only. (The name c...

6: Basic Parameters SLB™ Branch Office Manager User Guide 56 Port Range Enter a range of destination TCP or UDP port numbers to be tested. An entry is required for TCP, TCP New, TCP Established, and UDP, and is not allowed for other protocols. Separate multiple ports with commas. Separate ranges of ...

6: Basic Parameters SLB™ Branch Office Manager User Guide 57 To map a rule set to a network interface: 1. On the IP Filter page, select the IP filter rule set to be mapped. 2. From the Interface drop-down list, select the interface and click the Map Ruleset button. The Interface and rule set display...

6: Basic Parameters SLB™ Branch Office Manager User Guide 58 Routing The SLB branch office manager allows you to define static routes and, for networks using Routing Information Protocol (RIP)-capable routes, to enable the RIP protocol to configure the routes dynamically. To configure routing settin...

6: Basic Parameters SLB™ Branch Office Manager User Guide 59 Note: To display the routing table, click the IP Routes Report link. The Status/Reports page displays. To view the report, select the IP Routes checkbox and click Generate Report. Equivalent Routing Commands The following CLI commands corr...

SLB™ Branch Office Manager User Guide 60 7: Services System Logging and Other Services Use the Services page to:  Configure the amount of data sent to the logs.  Enable or disable SSH and Telnet logins.  Enable a Simple Network Management Protocol (SNMP) agent. Note: The SLB branch office manager...

7: Services SLB™ Branch Office Manager User Guide 61 2. Enter the following settings: System Logging In the System Logging section, select one of the following alert levels from the drop-down list for each message category:  Off: Disables this type of logging.  Info: Saves informative message, in ...

7: Services SLB™ Branch Office Manager User Guide 62 Remote Servers (#1 and #2) IP address of the remote server(s) where system logs are stored. The system log is always saved to local SLB storage. It is retained through SLB branch office manager reboots for files up to 200K. Saving the system log t...

7: Services SLB™ Branch Office Manager User Guide 63 Web Telnet Enables or disables the ability to access the SLB command Iine interface or device ports (connect direct) through the Web Telnet window. Disabled by default. Timeout If you enable Telnet logins, you can cause an idle connection to disco...

7: Services SLB™ Branch Office Manager User Guide 64 SNMP Simple Network Management Protocol (SNMP) is a set of protocols for managing complex networks. 1. Click the Services tab and select the SNMP option. The following page displays: 2. Enter the following: Enable Agent Enables or disables SNMP ag...

7: Services SLB™ Branch Office Manager User Guide 65 NMS When SNMP is enabled, an NMS (Network Management System) acts as a central server, requesting and receiving SNMP-type information from any computer using SNMP. The NMS can request information from the SLB branch office manager and receive trap...

7: Services SLB™ Branch Office Manager User Guide 66 V3 Read-Only User User Name SNMP v3 is secure and requires user-based authorization to access SLB MIB objects. Enter a user ID. The default is snmpuser . Up to 20 characters. V3 Password / Retype Password Password for a user with read-only authori...

7: Services SLB™ Branch Office Manager User Guide 68 To view current services: show services

7: Services SLB™ Branch Office Manager User Guide 70 2. Enter the following for up to three directories: NFS Mounts Remote Directory The remote NFS share directory in the format: nfs_server_hostname or ipaddr:/exported/path Local Directory The local directory on the SLB branch office manager on whic...

7: Services SLB™ Branch Office Manager User Guide 71 Network Interfaces Select the network ports from which the share can be seen. The default is for the share to be visible on both network ports. CIFS User Password/Retype Password Only one user special username (cifsuser) can access the CIFS share....

7: Services SLB™ Branch Office Manager User Guide 72 To configure the SMB/CIFS share, which contains the system and device port logs: set cifs <one or more parameters> Parameters: eth1 < enable |disable> eth2 < enable |disable> state <enable| disable > workgroup <Windows w...

7: Services SLB™ Branch Office Manager User Guide 73 2. To manage a secure IT management device, click its IP Address . A separate browser page takes the user to the web interface for the selected Secure IT management device (login required). 3. For SLM management appliances, if SSH or Telnet is ena...

7: Services SLB™ Branch Office Manager User Guide 74 Above the table, the Telnet to the CLI Enabled and SSH to the CLI Enabled fields indicate whether the unit has been set for Telnet or SSH access to the CLI. The table page lists all of the unit’s device ports (if applicable), indicates whether the...

7: Services SLB™ Branch Office Manager User Guide 76 Secure Lantronix Network Commands The following commands for the command line interface correspond to the web page entries described above. To detect and view all SLB branch office manager or user-defined IP addresses on the local network: set slc...

7: Services SLB™ Branch Office Manager User Guide 77 2. Enter the following: Change Date/Time Select the checkbox to manually enter the date and time at the SLB branch office manager’s location. Date From the drop-down lists, select the current month, day, and year. Time From the drop-down lists, se...

7: Services SLB™ Branch Office Manager User Guide 78 Synchronize via Select one of the following: Broadcast from NTP Server: Enables the SLB branch office manager to accept time information periodically transmitted by the NTP server. This is the default if you enable NTP. Poll NTP Server: Enables th...

7: Services SLB™ Branch Office Manager User Guide 79 To synchronize the SLB branch office manager with a remote time server using NTP: set ntp <one or more ntp parameters> Parameters: localserver1 <IP Address or Hostname> localserver2 <IP Address or Hostname> localserver3 <IP Ad...

SLB™ Branch Office Manager User Guide 80 8: Device Ports This chapter describes how to configure and use an SLB branch office manager device port connected to an external device, such as a server or a modem. The next chapter, 10: Connections , describes how to use the Connections web page to connect...

8: Device Ports SLB™ Branch Office Manager User Guide 81 Permissions There are three types of permissions:  Direct (or data) mode: The user can interact with and monitor the device port ( connect direct command).  Listen mode: The user can only monitor the device port ( connect listen command).  ...

8: Device Ports SLB™ Branch Office Manager User Guide 82 Current port numbering schemes for Telnet, SSH, and TCP ports display on the left. The list of ports 1-8 on the right includes the individual ports and their current mode. Note: For units with more ports, click the buttons above the table to v...

8: Device Ports SLB™ Branch Office Manager User Guide 83 Starting SSH Port Each port is assigned a number for connecting via SSH. Enter a number (1025-65535) that represents the first port. The default is 3000 plus the port number. For example, if you enter 3001, subsequent ports are automatically a...

8: Device Ports SLB™ Branch Office Manager User Guide 84 To configure settings for all or a group of device ports: set deviceport global <one or more parameters> Parameters: maxdirect <1-10> Sets the maximum number of direct connections for each device port. sshport <TCP Port> tcpp...

8: Device Ports SLB™ Branch Office Manager User Guide 86 To enter device port settings: 1. Enter the following: Mode The status of the port; displays automatically. Name The name of the port. Valid characters are letters, numbers, dashes (-), periods, and underscores ( _ ). Banner Text to display wh...

8: Device Ports SLB™ Branch Office Manager User Guide 87 IP Address IP address used for this device port so a user can Telnet, SSH, or establish a raw TCP connection to this address and connect directly to the device port. For Telnet and SSH, the default TCP port numbers (22 and 23, respectively) ar...

8: Device Ports SLB™ Branch Office Manager User Guide 88 Show Lines on Connecting If enabled, when the user either does a connect direct from the CLI or connects directly to the port using Telnet or SSH, the SLB outputs up to 24 lines of buffered data as soon as the serial port is connected. For exa...

8: Device Ports SLB™ Branch Office Manager User Guide 89 Initialization Script Commands sent to configure the modem may have up to 100 characters. Consult your modem’s documentation for recommended initialization options. If you do not specify an initialization script, the SLB device uses a default ...

8: Device Ports SLB™ Branch Office Manager User Guide 90 Modem Settings: PPP Mode Negotiate IP Address If the SLB branch office manager and/or the serial device have dynamic IP addresses (e.g., IP addresses assigned by a DHCP server), select Yes . Yes is the default. If the SLB branch office manager...

8: Device Ports SLB™ Branch Office Manager User Guide 91 Restart Delay The number of seconds after the timeout and before the SLB branch office manager attempts another connection. The default is 30 seconds. 2. To save settings for just this port, click the Apply button. 3. To save selected settings...

8: Device Ports SLB™ Branch Office Manager User Guide 92 To open the Device Ports – SLP page: 1. In the Connected to field above the IP Settings section of the Device Ports – Settings page, select an SLP or SLPEXP. 2. Click the Device Commands link. The following page displays: To enter SLP commands...

8: Device Ports SLB™ Branch Office Manager User Guide 93 Infeed Status Click the link to view the status of the data the SLP power manager is receiving. System Info Click the link to see system information pertaining to the SLP device. SLP Commands Restart SLP To restart the SLP power manager, selec...

8: Device Ports SLB™ Branch Office Manager User Guide 94 Humidity (%) Current relative humidity on the device the sensor is monitoring. Low Humidity Enter the relative humidity permitted on the device the sensor is monitoring below which the sensor sends a trap to the SLB branch office manager. High...

8: Device Ports SLB™ Branch Office Manager User Guide 95 dialoutpassword <Password> dialbacknumber <usernumber|Phone Number> dodauth <pap|chap> dodchaphost <CHAP Host or User Name> dodchapsecret <CHAP Secret or User Password> flowcontrol < none |xon/xoff|rts/cts> ...

8: Device Ports SLB™ Branch Office Manager User Guide 96 To view the settings for one or more device ports: show deviceport port <Device Port List or Name> To view a list of all device port names: show deviceport names To view the modes and states of one or more device port(s): You can optiona...

8: Device Ports SLB™ Branch Office Manager User Guide 97 single outlet. slp envmon Displays the environmental status (e.g., temperature and humidity) of the SLP power manager. slp infeedstatus Displays the infeed status and load of the SLP power manager. slp system Provides system information for th...

8: Device Ports SLB™ Branch Office Manager User Guide 98 To connect to a device port to monitor and/or interact with it, or to establish an outbound network connection: connect direct <endpoint> endpoint is one of: deviceport < Port # or Name > ssh < IP Address > [port <TCP Port...

8: Device Ports SLB™ Branch Office Manager User Guide 99 only the oldest data is lost, and only in the amount of overrun (not in large blocks of memory). NFS File Logging Data can be logged to a file on a remote NFS server. Data logged locally to the SLB branch office manager is limited to 256 Kbyte...

8: Device Ports SLB™ Branch Office Manager User Guide 100 Sylog Logging Data can be logged to the system log. If this feature is enabled, the data will appear in the Device Ports log, under the Info level. The log level for the Device Ports log must be set to Info for the data to be saved to the sys...

8: Device Ports SLB™ Branch Office Manager User Guide 103 PC Card Logging PC Card Logging Select to enable PC Card logging. A PC Card Compact Flash must be loaded into one of the PC Card slots on the front of the SLB branch office manager and properly mounted ((see PC Card Logging on page 99 ). Disa...

8: Device Ports SLB™ Branch Office Manager User Guide 104 emailrestart <Restart Delay> emailsend < email |trap|both> emailstring <Regex String> emailsubj <Email Subject> emailthreshold <Byte Threshold> emailto <Email Address> filedir <Logging Directory> file...

8: Device Ports SLB™ Branch Office Manager User Guide 105 2. Change the following as desired: Baud The speed with which the device port exchanges data with the attached serial device. From the drop-down list, select the baud rate. Most devices use 9600 for the administration port, so the console por...

8: Device Ports SLB™ Branch Office Manager User Guide 106 To configure console port settings: set consoleport <one or more parameters> Parameters: baud < 300-115200 > databits <7| 8 > stopbits < 1 |2> parity < none |odd|even> flowcontrol < none |xon/xoff|rts/cts> ...

8: Device Ports SLB™ Branch Office Manager User Guide 107 2. Enter the following: Switching Delay Number of milliseconds the SLB branch office manager between subsequent switching. The range is 1000-2500 msec. The default is 2000 msec (2 sec). Over Current Alarm If SNMP traps are enabled (see 7:Serv...

8: Device Ports SLB™ Branch Office Manager User Guide 108 should be on, off, or returned to the state it was in before the reboot. Default is Off. Last State Select whether to return the outlet to the state it was in before the reboot. Reboot To power cycle the outlet, select the checkbox. Default i...

8: Device Ports SLB™ Branch Office Manager User Guide 109 2. Enter the following: Note: To clear fields in the lower part of the page, click the Clear Host List button. Host List Id (view only) Displays after a host list is saved. Host List Name Enter a name for the host list. Retry Count Enter the ...

8: Device Ports SLB™ Branch Office Manager User Guide 111 To view or update a host list: 1. In the Host Lists table, select the host list and click the View Host List button. The list of hosts display in the Hosts box. 2. View, add, or update the following: Host List Id (view only) Displays after a ...

8: Device Ports SLB™ Branch Office Manager User Guide 112 Escape Sequence The escape character used to get the attention of the SSH or Telnet client. It is optional, and if not specified, Telnet and SSH use their default escape character. For Telnet, the escape character is either a single character...

8: Device Ports SLB™ Branch Office Manager User Guide 113 To add a new host entry to a list or edit an existing entry: set hostlist add|edit <Host List Name> entry <Host Number> [<parameters>] Parameters: host <IP Address or Name> protocol <ssh|telnet|tcp> port <TCP ...

SLB™ Branch Office Manager User Guide 114 9: PC Cards You can use the PC Card page to configure storage (Compact Flash) and modem/ISDN PC cards. A Compact Flash is useful for saving and restoring configurations (see Configuration Management on page 182 ) and for Device Port Logging (see PC Card Logg...

9: PC Cards SLB™ Branch Office Manager User Guide 115 4. Enter the following settings for the selected PC Card: Storage Settings Mount Select the checkbox to mount the first partition of the Compact Flash on the SLB device (if not currently mounted). Once mounted, a Compact Flash is used for device ...

9: PC Cards SLB™ Branch Office Manager User Guide 116 Filesystem Select ext2 or FAT , the file systems the SLB device supports. 5. Click the Apply button. To enter modem settings for a PC Card: 1. Insert any of the supported modem or ISDN cards (see www.lantronix.com/slb ) into either of the PC Card...

9: PC Cards SLB™ Branch Office Manager User Guide 119 Parity Parity checking is a rudimentary method of detecting simple, single-bit errors. From the drop-down list, select the parity. The default is none . Stop Bits The number of stop bit(s) used to indicate that a byte of data has been transmitted...

9: PC Cards SLB™ Branch Office Manager User Guide 120 Negotiated IP IP address associated with the GPRS connection. Text Mode Timeout Logins If you selected Text mode, you can enable logins to time out after the connection is inactive for a specified number of minutes. The default is No . This setti...

9: PC Cards SLB™ Branch Office Manager User Guide 122 TCP Port The TCP (raw) session port number to use if you selected TCP . Defaults: Upper PC Card Slot: 4049 Lower PC Card Slot: 4050 Range: 1025-65535 Authenticate If selected, the SLB branch office manager requires user authentication before gran...

9: PC Cards SLB™ Branch Office Manager User Guide 123 Removes a file on a Compact Flash card: pccard storage delete <upper|lower> file <Current Filename> PC Card Modem Commands To configure a currently loaded PC Card modem: pccard modem <upper|lower> <parameters> Paramet ers:...

10: Connections SLB™ Branch Office Manager User Guide 126 VT100 Terminals SLB Branch Office Manager Server Typical Setup Scenarios for the SLB Device Following are typical configurations in which SLB connections can be used, with references to settings on the Connections and Device Ports web pages. ...

10: Connections SLB™ Branch Office Manager User Guide 127 SLB Branch Office Manager Reverse Terminal Server In this scenario, the SLB branch office manager has one or more device ports connected to one or more serial ports of a mainframe server. Users can access a terminal session by establishing a ...

10: Connections SLB™ Branch Office Manager User Guide 129 Connection Configuration To create a connection: 1. Click the Devices tab and select the Connections opton. The following page displays: 2. For a device port, enter the following: Port The number of the device port you are connecting. This de...

10: Connections SLB™ Branch Office Manager User Guide 131 To view, update, or disconnect a current connection: The bottom of the Connections web page displays current connections. 4. To view details about a connection, hold the mouse over the arrow in the Flow column. 5. To disconnect (delete) a con...

10: Connections SLB™ Branch Office Manager User Guide 132 To monitor a device port: connect listen deviceport <Device Port # or Name> To connect a device port to another device port or an outbound network connection (data flows in both directions): connect bidirection <Port # or Name> &l...

10: Connections SLB™ Branch Office Manager User Guide 133 ssh <IP Address or Name> [port <TCP Port] >] <SSH flags>] where <SSH flags> is one or more of: user <Login Name> version <1|2> command <Command to Execute> tcp <IP Address> [port <TCP Port>...

SLB™ Branch Office Manager User Guide 134 11: User Authentication Users who attempt to log in to the SLB branch office manager by means of Telnet, SSH, the console port, or one of the device ports are granted access by one or more authentication methods. The User Authentication page provides a subme...

11: User Authentication SLB™ Branch Office Manager User Guide 135 2. To enable a method currently in the Disabled methods list, select the method and press the left arrow to the left of the list. The methods include: NIS (Network Information System) A network naming and administration system develop...

11: User Authentication SLB™ Branch Office Manager User Guide 136 TACACS+ (Terminal Access Controller Access Control System) TACACS+ allows a remote access server to communicate with an authentication server to determine whether the user has access to the network. TACACS+ is a completely new protoco...

11: User Authentication SLB™ Branch Office Manager User Guide 137 Local and Remote Users The system administrator can configure the SLB device to use local accounts and remote accounts to authenticate users. 1. Click the User Authentication tab and select the Local/Remote Users option. The following...

11: User Authentication SLB™ Branch Office Manager User Guide 138 Local User Passwords Complex Passwords Select to enable the SLB branch office manager to enforce rules concerning the password structure (e.g., alphanumeric requirements, number of characters, punctuation marks). Disabled by default. ...

11: User Authentication SLB™ Branch Office Manager User Guide 139 2. Enter the following information for the user: Login User ID of selected user. Authentication Select the type of authenticated user: Local: User listed in the SLB database. Remote: User not listed in the SLB database. UID A unique n...

11: User Authentication SLB™ Branch Office Manager User Guide 140 Access Outlets The outlets the user may monitor and configure. Enable for Dial-back Select to grant a local user dial-back access (see page 84 ). Users with dial-back access can dial into the SLB branch office manager and enter their ...

11: User Authentication SLB™ Branch Office Manager User Guide 142 5. Click the Back to Local/Remote Users link to return to the Local/Remote User Settings page. 6. Add another user or click the Back to Local/Remote Users link. The Local/Remote Users page displays with the new user(s) listed in the t...

11: User Authentication SLB™ Branch Office Manager User Guide 143 Local Users Commands The following CLI commands correspond to the web page entries described above. To configure local accounts (including sysadmin) who log in to the SLB branch office manager by means of SSH, Telnet, the Web, or the ...

11: User Authentication SLB™ Branch Office Manager User Guide 144 To view settings for all users or a local user: show localusers [user <User Login>] To block (lock out) a user's ability to log in: set localusers lock <User Login> Note: This capability is not available on the web page. T...

11: User Authentication SLB™ Branch Office Manager User Guide 145 To configure attributes for users who log in by a remote authentication method: set remoteusers add|edit <User Login> [<parameters>] Parameters accessoutlets <Outlet List> breakseq <1-10 Chars> clearports <P...

11: User Authentication SLB™ Branch Office Manager User Guide 146 2. Enter the following: Enable NIS Displays selected if you enabled this method on the Authentication Methods page. If you want to set up this authentication method but not enable it immediately, clear the checkbox. Note: You can enab...

11: User Authentication SLB™ Branch Office Manager User Guide 147 Custom Menu If custom menus have been created you can assign a default custom menu to NIS users. Escape Sequence A single character or a two-character sequence that causes the SLB branch office manager to leave direct (interactive) mo...

11: User Authentication SLB™ Branch Office Manager User Guide 148 Secure Lantronix Network Right to view and manage secure IT management units (e.g., SLP power managers, Spiders, SLC console managers, SLB branch office managers) on the local subnet. Local Users Right to add or delete local users on ...

11: User Authentication SLB™ Branch Office Manager User Guide 149 To configure the SLB branch office manager to use NIS to authenticate users who log in via the Web, SSH, Telnet, or the console port: set nis <one or more parameters> Parameters: accessoutlets <Outlet List> breakseq <1-...

11: User Authentication SLB™ Branch Office Manager User Guide 150 LDAP allows SLB users to authenticate using a wide variety of LDAP servers, such as OpenLDAP and Microsoft Active Directory. The LDAP implementation supports LDAP servers that do not allow anonymous queries. Users who are authenticate...

11: User Authentication SLB™ Branch Office Manager User Guide 153 LDAP Commands These commands for the command line interface correspond to the web page entries described above. To configure the SLB branch office manager to use LDAP to authenticate users who log in via the Web, SSH, Telnet, or the c...

11: User Authentication SLB™ Branch Office Manager User Guide 154 RADIUS The system administrator can configure the SLB branch office manager to use RADIUS to authenticate users attempting to log in using the Web, Telnet, SSH, or the console port. Users who are authenticated through RADIUS are grant...

11: User Authentication SLB™ Branch Office Manager User Guide 155 Enable RADIUS Displays selected if you enabled this method on the User Authentication page. If you want to set up this authentication method but not enable it immediately, clear the checkbox. Note: You can enable RADIUS here or on the...

11: User Authentication SLB™ Branch Office Manager User Guide 156 Break Sequence A series of 1-10 characters users can enter on the command line interface to send a break signal to the external device. A suggested value is Esc+B (escape key, then uppercase “B” performed quickly but not simultaneousl...

11: User Authentication SLB™ Branch Office Manager User Guide 157 Reboot & Shutdown Right to use the CLI or shut down the SLB branch office manager and then reboot it. Firmware & Configuration Right to upgrade the firmware on the unit and save or restore a configuration (all settings). Selec...

11: User Authentication SLB™ Branch Office Manager User Guide 158 To set user group and permissions for RADIUS users: set radius group <default|power|admin> To set permissions for RADIUS users not already defined by the user rights group: set radius permissions <Permission List> where &l...

11: User Authentication SLB™ Branch Office Manager User Guide 159 2. Enter the following: Enable Kerberos Displays selected if you enabled this method on the User Authentication page. If you want to set up this authentication method but not enable it immediately, clear the checkbox. Note: You can en...

11: User Authentication SLB™ Branch Office Manager User Guide 160 KDC IP Address Enter the IP address of the Key Distribution Center (KDC). KDC Port Port on the KDC listening for requests. Enter an integer with a maximum value of 65535. The default is 88 . Custom Menu If custom menus have been creat...

11: User Authentication SLB™ Branch Office Manager User Guide 162 PC Card Right to enter modem settings for PC cards. Power Outlets Right to configure power outlets. 5. Click the Apply button. Note: You must reboot the unit before your changes will take effect. Kerberos Commands These commands for t...

11: User Authentication SLB™ Branch Office Manager User Guide 163 To view Kerberos settings: show kerberos TACACS+ Similar to RADIUS, the main function of TACACS+ is to perform authentication for remote access. The SLB branch office manager supports the TACACS+ protocol (not the older TACACS or XTAC...

11: User Authentication SLB™ Branch Office Manager User Guide 164 2. Enter the following: Enable TACACS+ Displays selected if you enabled this method on the User Authentication page. If you want to set up this authentication method but not enable it immediately, clear the checkbox. You can enable TA...

11: User Authentication SLB™ Branch Office Manager User Guide 166 TACACS+ Commands These commands for the command line interface correspond to the web page entries described above. To configure the SLB branch office manager to use TACACS+ to authenticate users who log in via the Web, SSH, Telnet, or...

11: User Authentication SLB™ Branch Office Manager User Guide 167 not used, a user can access multiple hosts without entering a password. In either case, the authentication is protected against security attacks because both the public key and the private key are required to authenticate. For both im...

11: User Authentication SLB™ Branch Office Manager User Guide 168 2. Enter the following: Imported Keys (SSH In) Host & User Associated with Key These entries are required in the following cases:  The imported key file does not contain the host that the user will be making an SSH connection fro...

11: User Authentication SLB™ Branch Office Manager User Guide 169 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAEEApUHCX9EWsHt+jmUGXa1YC3us ABYxIXUhSU1N+NU9HNaUADUFfd8LYz8/gUnUSH4Ksm8GRT7/8/Sn9jCVfGPh UQ== asallaway@winserver Host Host name or IP address from which the SSH connections to the SLB branch office ma...

11: User Authentication SLB™ Branch Office Manager User Guide 170 Host and Login for Export Export via Select the method ( SCP , FTP , or Cut and Paste) of exporting the key to the remote server. Cut and Paste , the default, requires no other parameters for export. Host IP address of the remote serv...

11: User Authentication SLB™ Branch Office Manager User Guide 172 Public Key Filename Filename of the public host key. Private Key Filename Filename of the private host key. Host Host name or IPaddress of the host from which to import the key. Path Path of the directory where the host key will be st...

11: User Authentication SLB™ Branch Office Manager User Guide 173 To export a key: set sshkey export <ftp|scp|copypaste> <one or more parameters> Parameters: [format < openssh |secsh>] [host <IP Address or Name>] [login <User Login>] [path <Path to Copy Key>] bits...

11: User Authentication SLB™ Branch Office Manager User Guide 174 To display SSH keys that have been imported: show sshkey import <one or more parameters> Parameters: [keyhost <SSH Key IP Address or Name>] [keyuser <SSH Key User>] [viewkey <enable|disable>] To display SSH key...

11: User Authentication SLB™ Branch Office Manager User Guide 175  Maximum of five nested menus can be called.  No syntax checking (Enter each command correctly.) To assign a custom user menu to a local or remote user: set localusers add|edit <User Login> menu <Menu Name> To create a n...

11: User Authentication SLB™ Branch Office Manager User Guide 176 Example The system administrator creates two custom user menus, with menu1 having a nested menu (menu2): [SLB]> set menu add menu1 Enter optional menu title (<return> for none): Menu1 Title Specify nickname for each command? ...

SLB™ Branch Office Manager User Guide 179 12: Maintenance and Operation The system administrator performs maintenance activities and operates the SLB branch office manager using the options for the Maintenance tab and additional commands on the command line interface. SLB Maintenance The Firmware &a...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 180 2. Enter the following: General Reboot Select this option to reboot the SLB branch office manager immediately. The default is No . Note: The front panel LCD displays the “Rebooting the SLB” message, and the normal boot sequence ...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 181 Login Banner The text to display on the command line interface after the user logs in. Default is blank. Note: To create more lines, use the \n character sequence. Logout Banner The text to display on the command line interface ...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 182 Boot Banks Bank 1 Version of SLB firmware in bank 1. Note: The word "current" displays next to the bank the SLB branch office manager booted from. Bank 2 Version of SLB firmware in bank 2. Next Boot Bank Current setting ...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 183 Location for Save, Restore, or Manage If you selected to save or restore a configuration, select one of the following options: Default – Saved Configurations: If restoring, select a saved configuration from the drop-down list. F...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 184 2. To delete files, select one or more files and click the Delete button. Firmware & Configurations – Web Sessions The Firmware & Configurations - Web Sessions page enables you to view and terminate current web sessions....

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 185 2. If desired, enter the following: Reset to Default Certificate To reset to the default certificate, select the checkbox to reset to the default certificate. Unselected by default. Import SSL Certificate To import your own SSL ...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 186 iGoogle Gadgets You can create an iGoogle gadgets that enables you to view the status of the ports of many SLB branch office managers on one web page. Anyone with a Google email account (gmail.com) can create an iGoogle gadget f...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 187 Administrative Commands These commands for the command line interface correspond to the web page entries described above. To copy the boot bank from the currently booted bank to the alternate bank (for dual-boot SLB branch offic...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 188 To enable or disable iGoogle Gadget web content: admin web gadget <enable|disable> To configure the timeout for web sessions: admin web timeout <disable|5-120> Timeouts are measured in minutes. To terminate a web ses...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 190 To delete a saved configuration: admin config delete <Config Name> location <default|cifs|pccard> [pccardslot < upper |lower>] To list the configurations saved to a location: admin config show <default|ftp|s...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 191 2. Enter the following: Log Select the type(s) of log you want to view. Level Select the alert level you want to view for the selected log. Starting at Select the starting point of the range you want to view: Beginning of Log: B...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 193 System Log Command The following command for the command line interface corresponds to the web page entries described above. Audit Log The Audit Log web page displays a log of all actions that have changed the configuration of t...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 194 2. To select a sort option (by Date/Time, User, Command/Action, click the appropriate button:  To sort by date and time, click the Sort by Date/Time button. (This is the default.)  To sort by user, click the Sort by User butto...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 196 Send Packet This option sends an Ethernet packet out one of the Ethernet ports, mainly as a network connectivity test. Enter the following: Protocol: Select the type of packet to send. Hostname: Specify a host name or IPaddress ...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 198 Diagnostic Commands The following CLI commands correspond to the web page entries described above. To display the ARP table of IP address-to-hardware address mapping: diag arp [email <Email Address>] You can optionally ema...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 200 The top half of the page displays the status of each port, power supply, and power outlet. Green indicates that the port connection or power supply is active and functioning correctly. Red indicates an error or failure or that t...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 202 Status Commands These commands for the command line interface correspond to the web page entries described above. To display device port modes and states for one or more ports: You can optionally email the displayed information....

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 204 SNMP Trap OID Enter a unique identifier for an SNMP object. (An SNMP object is anything that can hold a value and can be read using an SNMP "get" action.) The OID consists of a string of numbers separated by periods (for...

12: Maintenance and Operation SLB™ Branch Office Manager User Guide 205 To update event definitions: admin events edit <Event ID> <parameters> Parameters: community <SNMP Community> deviceport <Device Port # or Name> ethport <1|2> nms <SNMP NMS> oid <SNMP Trap ...

SLB™ Branch Office Manager User Guide 206 13: Application Examples Each SLB branch office manager has multiple serial ports and two network ports. Each serial port can be connected to the console port of an IT device. Using a network port (in-band) or a modem (out-of-band) for dial-up connection, an...

13: Application Examples SLB™ Branch Office Manager User Guide 207 Telnet/SSH to a Remote Device The following figure shows a Sun server connected to port 2 of the SLB device. Figure 13-2. Remote User Connected to a SUN Server via the SLB Device In this example, the sysadmin would: 1. Display the cu...

13: Application Examples SLB™ Branch Office Manager User Guide 209 [SLB]> 2. Configure the device port that is connected to the console port of the Sun UNIX server: [SLB]> set deviceport port 2 baud 57600 flowcontrol none Device Port settings successfully updated. 3. Dial into the SLB branch o...

13: Application Examples SLB™ Branch Office Manager User Guide 210 Local Serial Connection to Network Device via Telnet This example shows a terminal device connected to an SLB device port, and a Sun server connected over the network to the SLB branch office manager. W hen a connection is establishe...

SLB™ Branch Office Manager User Guide 212 14: Command Reference After an introduction to using commands, this chapter lists and describes all of the commands available on the SLB command line interface accessed through Telnet, SSH, or a serial connection. The commands are in alphabetical order by ca...

14: Command Reference SLB™ Branch Office Manager User Guide 213 Table 14-1. Actions and Category Options Action Category set network | ipfilter | routing | datetime | ntp | services | nfs | cifs | menu | auth | hostlist | localusers | remoteusers | ldap | radius | kerberos | tacacs+ | consoleport | ...

14: Command Reference SLB™ Branch Office Manager User Guide 214  Use the up and down arrows to scroll through previously entered commands. If desired, select one and edit it. You can scroll through up to 100 previous commands entered in the session.  To clear an IP address, type 0.0.0.0 , or to cl...

14: Command Reference SLB™ Branch Office Manager User Guide 215 admin config delete Syntax admin config delete <Config Name> location <default|cifs|pccard> [pccardslot <upper|lower>] Description Deletes a configuration. admin config factorydefaults Syntax admin config factorydefaul...

14: Command Reference SLB™ Branch Office Manager User Guide 216 Description Saves the current SLB configuration to a selected location. admin config show Syntax admin config show <default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>] [pccardslot <upper|lower>] Description Li...

14: Command Reference SLB™ Branch Office Manager User Guide 218 Description Displays keypad settings. admin lcd reset Syntax admin lcd reset Description Restarts the program that controls the LCD. admin quicksetup Syntax admin quicksetup Description Runs the quick setup script. admin reboot Syntax a...

14: Command Reference SLB™ Branch Office Manager User Guide 219 admin web certificate Syntax admin web certificate import via <sftp|scp> certfile <Certificate File> privfile <Private Key File> host <IP Address or Name> login <User Login> [path <Path to Files>] Des...

14: Command Reference SLB™ Branch Office Manager User Guide 220 admin web terminate Syntax admin web terminate <Session ID> Description Terminates a web session. admin web show Syntax admin web show Description Displays the current sessions and their ID. Add ‘admin web certificate’ commands Au...

14: Command Reference SLB™ Branch Office Manager User Guide 221 Local Users authentication is always the first method used. Any methods omitted from the command are disabled. show auth Syntax show auth Description Displays authentication methods and their order of precedence. show user Syntax show u...

14: Command Reference SLB™ Branch Office Manager User Guide 222 Description Configures the SLB branch office manager to use Kerberos to authenticate users who log in via the Web, SSH, Telnet, or the console port. show kerberos Syntax show kerberos Description Displays Kerberos settings. LDAP Command...

14: Command Reference SLB™ Branch Office Manager User Guide 223 show ldap Description Displays LDAP settings: Syntax show ldap Local Users Commands set localusers add|edit Syntax set localusers add|edit <User Login> <one or more parameters> Parameters accessoutlets <Outlet List> al...

14: Command Reference SLB™ Branch Office Manager User Guide 224 set localusers allowreuse Syntax set localusers allowreuse <enable| disable > Description Sets whether a login password can be reused. set local users complexpasswords Syntax set localusers complexpasswords <enable| disable >...

14: Command Reference SLB™ Branch Office Manager User Guide 226 NIS Commands set nis Syntax set nis <one or more parameters> Parameters accessoutlets <Outlet List> broadcast <enable| disable > clearports <Port List> custommenu <Menu Name> dataports <Port List> dom...

14: Command Reference SLB™ Branch Office Manager User Guide 227 RADIUS Commands set radius Syntax set radius <one or more parameters> Parameters: accessoutlets <Outlet List> state <enable| disable > clearports <Port List> custommenu <Menu Name> dataports <Port List&g...

14: Command Reference SLB™ Branch Office Manager User Guide 228 TACACS+ Commands set tacacs+ Syntax set tacacs+ <one or more parameters> Parameters accessoutlets <Outlet List> clearports <Port List> custommenu <Menu Name> dataports <Port List> encrypt < enable |disab...

14: Command Reference SLB™ Branch Office Manager User Guide 229 Description Adds a local user to a user group or changes the group the user belongs to. set localusers lock Syntax set local users unlock <User Login> Description Blocks (locks) a user's ability to login. set localusers unlock Syn...

14: Command Reference SLB™ Branch Office Manager User Guide 230 where <Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, pc, rs, rc, dr, wb, sn, ad, po To remove a permission, type a minus sign before the two-letter abbreviation for a user right. Description Sets attributes fo...

14: Command Reference SLB™ Branch Office Manager User Guide 231 Description Sets permissions not already defined by the assigned permissions group. show user Syntax show user Description Displays the rights of the currently logged-in user: CLI Commands set cli Syntax set cli scscommands <enable|d...

14: Command Reference SLB™ Branch Office Manager User Guide 232 Description Allow (unlock) a user’s ability to log in. show cli Syntax show cli Description Displays current CLI settings. show user Syntax show user Description Displays attributes of the currently logged in user. set history Syntax se...

14: Command Reference SLB™ Branch Office Manager User Guide 234 connect global outgoingtimeout Syntax connect global outgoingtimeout <disable|1-9999 seconds> Description Sets the amount of time the SLB branch office manager will wait for a response (sign of life) from an SSH/Telnet server that...

14: Command Reference SLB™ Branch Office Manager User Guide 235 telnet <IP Address or Name> [port <TCP Port] trigger < now |datetime|chars> If the trigger is datetime (establish connection at a specified date/time), enter the date parameter. If the trigger is chars (establish connecti...

14: Command Reference SLB™ Branch Office Manager User Guide 236 Description Configures console port settings. show consoleport Syntax show consoleport Description Displays console port settings. Custom User Menu Commands When creating a custom user menu, note the following limitations:  Maximum of ...

14: Command Reference SLB™ Branch Office Manager User Guide 237 title <Menu Title> Description Changes a command within an existing custom user menu. Changes a nickname within an existing custom user menu. Enables or disables the redisplay of the menu before each prompt. Enables or disables th...

14: Command Reference SLB™ Branch Office Manager User Guide 238 show datetime Syntax show datetime Description Displays the local date, time, and time zone. set ntp Syntax set ntp <one or more ntp parameters> Parameters localserver1 <IP Address or Hostname> localserver2 <IP Address or...

14: Command Reference SLB™ Branch Office Manager User Guide 239 slp outletcontrol state <on|off|cyclepower> [outlet <Outlet #>][tower <A|B>] Outlet # is 1-8 for SLP8 power manager and 1-16 for SLP16 power manager. The outletcontrol parameters control individual outlets. slp outlets...

14: Command Reference SLB™ Branch Office Manager User Guide 241 remoteipaddr <negotiate|IP Address> restartdelay <PPP Restart Delay> slp infeedstatus Displays the infeed status and load of the SLP power manager . sshauth < enable |disable> sshin <enable| disable > sshport <...

14: Command Reference SLB™ Branch Office Manager User Guide 242 Description Displays a list of all device port names. show deviceport port Syntax show deviceport port <Device Port List or Name> Description Displays the settings for one or more device ports. show portcounters Syntax show portco...

14: Command Reference SLB™ Branch Office Manager User Guide 243 diag internals Syntax diag internals Description Displays information on the internal memory, storage and processes of the SLB branch office manager. Note: This command is available in the CLI but not the web. diag netstat Syntax diag n...

14: Command Reference SLB™ Branch Office Manager User Guide 244 xferdatasize < Size In Kbytes to Transfer > Default is 1 Kbyte. Description Tests a device port by transmitting data out the port and verifying that it is received correctly. A special loopback cable comes with the SLB branch offi...

14: Command Reference SLB™ Branch Office Manager User Guide 245 Events Commands admin events add Syntax admin events add <receivetrap> <response> <response> is one of: action <fwdalltrapseth|fwdseltrapeth> ethport <1|2> nms <SNMP NMS> community <SNMP Community&...

14: Command Reference SLB™ Branch Office Manager User Guide 246 admin events show Syntax admin events show Description Displays event definitions. Host List Commands set hostlist add|edit <Host List Name> Syntax set hostlist add|edit <Host List Name> [<parameters>] Parameters name ...

14: Command Reference SLB™ Branch Office Manager User Guide 247 set hostlist delete Syntax set hostlist delete <Host List> [entry <Host Number>] Description Deletes a host list, or a single host entry from a host list. show hostlist Syntax show hostlist <all|names|Host List Name> D...

14: Command Reference SLB™ Branch Office Manager User Guide 248 edit <Ruleset Name> <Edit Parameters> Edit Parameters: append insert <Rule Number> replace <Rule Number> delete <Rule Number> Description Sets IP filter rules. Logging Commands set deviceport port Syntax se...

14: Command Reference SLB™ Branch Office Manager User Guide 249 sysloglogging <enable| disable > Description Configures logging settings for one or more device ports. Local logging must be enabled for a device port for the locallog commands to be executed. To use the set locallog clear command...

14: Command Reference SLB™ Branch Office Manager User Guide 250 set network dns Syntax set network dns <1|2|3> ipaddr <IP Address> Description Configures up to three DNS servers. set network gateway Syntax set network gateway <parameters> Parameters default <IP Address> prece...

14: Command Reference SLB™ Branch Office Manager User Guide 251 show network dns Syntax show network dns Description Displays DNS settings. show network gateway Syntax show network gateway Description Displays gateway settings. show network host Syntax show network host Description Displays the netw...

14: Command Reference SLB™ Branch Office Manager User Guide 252 mount < enable |disable> remdir < Remote NFS Directory > rw <enable| disable > Enables or disables read/write access to remote directory. Description Mounts a remote NFS share. The remdir and locdir parameters are requ...

14: Command Reference SLB™ Branch Office Manager User Guide 253 show nfs Syntax show nfs Description Displays NFS share settings. PC Card Storage Commands pccard storage dir Syntax pccard storage dir <upper|lower> Description Views a directory listing of a Compact Flash card. pccard storage fo...

14: Command Reference SLB™ Branch Office Manager User Guide 254 PC Card Modem Commands pccard modem Syntax pccard modem <upper|lower> <parameters> Parameters auth < pap |chap> baud <300-115200> 9600 is the default. calleridcmd <Modem Command String> calleridlogging <...

14: Command Reference SLB™ Branch Office Manager User Guide 255 remoteipaddr <negotiate|IP Address> restartdelay <PPP Restart Delay> service <none|telnet|ssh|tcp> sshauth <enable|disable> sshport <TCP Port> stopbits < 1 |2> tcpauth <enable|disable> tcpport &...

14: Command Reference SLB™ Branch Office Manager User Guide 256 set power switchingdelay Syntax set power switchingdelay <Delay in msec> Description Sets the delay after switching on an outlet before switching on the next. show power Syntax show power <Outlet # or Name> Description Displ...

14: Command Reference SLB™ Branch Office Manager User Guide 257 Services Commands set services Syntax set services <one or more services parameters> Parameters alarmdelay <1-6000 Seconds> auditlog <enable| disable > auditsize <Size in Kbytes> Limit is 1-500 Kbytes authlog <...

14: Command Reference SLB™ Branch Office Manager User Guide 258 trapcommunity <Trap Community> v1ssh < enable |disable> v3password <Password for v3 auth> v3user <User for v3 auth> v3user <V3 RO User> v3password <V3 RO User Password> v3phrase <V3 RO User Passphr...

14: Command Reference SLB™ Branch Office Manager User Guide 259 show slcnetwork Syntax show slcnetwork [ipaddrlist <all|Address Mask>] Description Detects and displays all SLB devices on the local network. Without the ipaddrlist parameter, the command searches the SLB network. With the ipaddrl...

14: Command Reference SLB™ Branch Office Manager User Guide 260 [path <Path to Copy Key>] bits < 512 |1024> keyname <SSH Key Name> keyuser <SSH Key User> type < rsa |dsa> Description Exports an sshkey. set sshkey import set sshkey import <ftp|scp> <one or more ...

14: Command Reference SLB™ Branch Office Manager User Guide 261 Parameters [keyhost <SSH Key IP Address or Name>] [keyuser <SSH Key User>] [viewkey <enable|disable>] Description Displays all exported keys or keys for a specific user, IP address, or name. show sshkey import Syntax s...

14: Command Reference SLB™ Branch Office Manager User Guide 262 Description Provides details, for example, endpoint parameters and trigger, for a specific connection. Optionally emails the displayed information. Note: Use the basic show connections command to obtain the Connection ID. show portcount...

14: Command Reference SLB™ Branch Office Manager User Guide 263 level < error |warning|info|debug> log < all |netlog|servlog|authlog|devlog|diaglog|genlog> display <head|tail> [numlines <Number of Lines>] starttime <MMDDYYhhmm[ss]> endtime <MMDDYYhhmm[ss]> Descrip...

SLB™ Branch Office Manager User Guide 264 A: Bootloader The SLM management appliance provides a bootload command interface. This interface is only accessible through the SLB branch office manager’s console port. Accessing the Bootloader To access the bootloader CLI: To access the bootloader command ...

A: Bootloader SLB™ Branch Office Manager User Guide 265 Displays information about the current user. Administrator Commands In addition to the commands that the user can issue, the administrator can issue the following commands: imagecopy Copies an image of the drive from the lower PCMCIA device to ...

SLB™ Branch Office Manager User Guide 266 B: Security Considerations The SLB branch office manager provides data path security by means of SSH or Web/SSL. Even with the use of SSH/SSL, however, do not assume you have complete security. Securing the data path is only one measure needed to ensure secu...

SLB™ Branch Office Manager User Guide 267 C: Safety Information Safety Precautions Please follow the safety precautions described below when installing and operating the SLB branch office manager. Cover  Do not remove the cover of the chassis. There are no user-serviceable parts inside. Opening or ...

C: Safety Information SLB™ Branch Office Manager User Guide 268 − Install only in restricted access areas (dedicated equipment rooms, equipment closets or the like) in accordance with Articles 110-16, 110-17, and 110-18 of the National Electrical Code, ANSI/NFPA 70. − Route and secure input wiring t...

SLB™ Branch Office Manager User Guide 269 D: Adapters and Pinouts The serial device ports of the SLB branch office manager products match the RJ45 pinouts of the console ports of many popular devices found in a network environment. The SLB device uses conventional straight-through Category 5 fully p...

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 270 RJ45 Receptacle to DB25M DCE Adapter for the SLB Device (PN 200.2066A) Use PN 200.2066A adapter with a dumb terminal or with many SUN applications. 5 6 7 2 20 4 8 3 RJ45 DB25 Male Pin 1 Gnd 4 Rx 6 DSR 7 CTS 8 Gnd 5 Tx 3 RTS 1 DTR 2 1

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 271 RJ45 Receptacle to DB25F DCE Adapter for the SLB Device (PN 200.2067A) 5 6 7 2 20 4 8 3 RJ45 DB25 Female Pin 1 Rx 6 DSR 7 CTS 8 Gnd 5 Tx 3 RTS 1 DTR 2 1

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 272 RJ45 Receptacle to DB9M DCE Adapter for the SLB Device (PN 200.2069A) 8 6 5 3 4 7 1 2 RJ45 DB9 Male Pin 1 Gnd 4 Rx 6 DSR 7 CTS 8 Gnd 5 Tx 3 RTS 1 DTR 2 1

D: Adapters and Pinouts SLB™ Branch Office Manager User Guide 273 RJ45 Receptacle to DB9F DCE Adapter for the SLB Device (PN 200.2070A) Use PN 200.2070A adapter with a PC's serial port. 1 8 2 6 4 5 6 3 7 4 8 7 1 5 3 2 RJ45 DB9 Female Pin 1 Gnd 4 Rx 6 DSR 7 CTS 8 Gnd 5 Tx 3 RTS 1 DTR 2 1

SLB™ Branch Office Manager User Guide 275 E: Protocol Glossary BOOTP (Bootstrap Protocol) Similar to DHCP, but for smaller networks. Automatically assigns the IP address for a specific duration of time. CHAP (Challenge Handshake Authentication Protocol ) A secure protocol for connecting to a system;...

E: Protocol Glossary SLB™ Branch Office Manager User Guide 276 NMS (Network Management System) NMS acts as a central server, requesting and receiving SNMP-type information from any computer using SNMP. NTP (Network Time Protocol) A protocol used to synchronize time on networked computers and equipme...

SLB™ Branch Office Manager User Guide 278 F: Compliance Information Manufacturer’s Name & Address: Lantronix, Inc., 167 Technology Drive, Irvine, CA 92618 USA Declares that the following product: Product Name(s): SLB Branch Office Manager (SLB Series) Conforms to the following standards or other...

F: Compliance Information SLB™ Branch Office Manager User Guide 279 • EN 55022 — “Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.” • EN 55024 — “Information technology equipment - Immunity characteristics - Limits and methods of measuremen...

F: Compliance Information SLB™ Branch Office Manager User Guide 280 RoHS Notice: All Lantronix products in the following families are China RoHS-compliant and free of the following hazardous substances and elements: • Lead (Pb) • Mercury (Hg) • Polybrominated biphenyls (PBB) • Cadmium (Cd) • Hexaval...