Page 2 - When using electrical appliances, basic safety
When using electrical appliances, basic safety precautions should be followed to Reduce the risk of fire, electric shock, and injury to persons or property. Read all Instructions before using any appliance. When the unit is received please wait 24 hours before plugging it in to let the refrigerant s...
Page 4 - INTRODUCTION
2 Main machine assembly 1. Screw the four adjustable feet of the attachment into the ice cabinet. (Notes: The feet should not be loose.) 2. Put the ice cabinet on the floor and place the bin on the ice cabinet. (Note; it should be firmly in place after completing the installation) Cabinet Bin Cabine...
Page 5 - B C D
3 transmitted to 1/3 latch 、 dia 9.52mm white inlet pipe 。 Spare parts for ice cabinet: white water pipe, ice scoop, adjustable feet 4pcs II.Host distributive pipe ： A Water flows through small holes when making ice. B. Evaporator ： B C. Ice full checkerboard Stop working when ice full or C check th...
Page 6 - Unpacking the machine
The ice-making time countdown display; when C is displayed, it is the ambient temperature display. 2. The ice making and de-icing symbols are displayed. The ice is being made when the symbol is rotating, and it is being de-iced when the symbol is flashing. 3. Automatic cleaning symbol displays. 4. O...
Page 7 - The new machine must be thoroughly cleaned before use
5 3. Install 4 adjustable feet on the unit, and then place the bin on the cabinet. The machine needs to be placed in an environment of good ventilation and relatively low ambient temperature. It should be placed horizontally, and the distance between the air outlet and the barrier should be at least...
Page 8 - Water connection; and then remove the water pipe.
6 Water connection 1. The connection between the water pipe and the machine: tear off the external water supply pipe interface tape as shown in Figure A on the back of the machine, and remove the blue color on the external water supply pipe interface and the "L-type 3/4 quick connect to 3/4 plug...
Page 9 - Ice making operation; How to operate
7 4. Connection of water pipe and faucet: connect the 4-point to 3-pipe conversion head in the accessory to the valve (thread), after removing the buckle of the adapter, insert the white water pipe and reset the buckle to complete the connection between the water pipe and the faucet (the faucet is p...
Page 11 - and the machine enters the mode you need.; How to cancel timing; on the screen will go out, and the timing will be cancelled.
9 "H" in the lower corner of the number is flashing. When it becomes steady after 5 seconds, the setting is completed. 5H is displayed in standby mode, indicating that the machine will automatically turn on after 5 hours; 5H in ice making mode, indicating that the machine will automatically ...
Page 12 - Troubleshooting display; TOUBLESHOOTING
10 touble reason solution “ ” appear Insufficient water Low water inputting pressure or pipe blockage —add pressure or clean the pipe The ball on Level switch locked Cleaning the water tank and level switch Water isn ’ t remaining in the unit Place the machine in horizontal position Water leaves the...
