Konica Minolta Pi1803e - Manuals

iv Pi1803e/Pi2001e For countries subject to Class B regulations For countries not subject to Class B regulations This device must be used with shielded interface cables. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR 22 rule...

Welcome 1 Pi1803e/Pi2001e 1-1 1 Welcome This manual provides information on setting up and using a copier as a PCL printer. Read these instructions thoroughly before using the functions. For instructions on using the copier itself and for general safety precautions, refer to the manual provided with...

1 Welcome 1-2 Pi1803e/Pi2001e 1.1 END USER LICENSE AGREEMENT PLEASE READ CAREFULLY THE LICENSE AGREEMENT BELOW BEFORE INSTALLING THE SOFTWARE. INSTALLING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THE TERMS AND CONDITIONS BELOW. IF YOU DO NOT AGREE WITH THEM, YOU SHOULD PROMPTLY RETURN THE SOFTWARE U...

Welcome 1 Pi1803e/Pi2001e 1-3 4. RESTRICTIONS (1) You shall not without the written consent of KONICA MINOLTA:(i) use, copy, modify, merge or transfer copies of the Software except as provided herein, (ii) reverse assemble or reverse compile the Software except as permitted by law; or (iii) sublicen...

1 Welcome 1-4 Pi1803e/Pi2001e 9. GOVERNMENT END USERS If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical...

Welcome 1 Pi1803e/Pi2001e 1-5 1.2 Trademark Acknowledgements KONICA MINOLTA is a trademark or a registered trademark of KONICA MINOLTA HOLDINGS, INC. PageScope is a trademark of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Ethernet is a registered trademark of Xerox Corporation. PCL is a registered tr...

Getting Ready 2 Pi1803e/Pi2001e 2-1 2 Getting Ready 2.1 System Requirements The following operating environment is required in order to use the printer driver. *1: Point and print is possible with printers shared by Windows servers and clients. (Windows 2000 and NT 4.0 only) Clients inherit the driv...

2 Getting Ready 2-2 Pi1803e/Pi2001e 2.2 Features of Printer Controller Pi1803e/Pi2001e Various Printing Functions G Prints multiple copies at one time. In addition, the printed pages can be sorted into complete sets, which contain a copy of each page, or into groups where each contains all copies of...

Connecting to a Computer 3 Pi1803e/Pi2001e 3-1 3 Connecting to a Computer 3.1 Types of Connections You can use either of the following two methods to connect the machine to a computer. Parallel Port Connection Use this type of connection when you want to connect the machine directly to a computer’s ...

3 Connecting to a Computer 3-2 Pi1803e/Pi2001e 3.2 Parallel Port Connection Use the parallel cable to connect the parallel port of the machine to the parallel port of the computer. ✎ Important! Be sure to use a shielded parallel cable. Use of an unshielded cable may result in radio frequency interfe...

Connecting to a Computer 3 Pi1803e/Pi2001e 3-3 3.3 USB Port Connection Use the USB cable (Type B) to connect the machine’s USB port to the USB port on your computer.

Installing the Printer Driver 4 Pi1803e/Pi2001e 4-1 4 Installing the Printer Driver This section describes the procedure for installing the printer driver. The printer driver can be installed in two ways: by using Plug and Play or by using the Add Printer Wizard. For network printing, use the Add Pr...

4 Installing the Printer Driver 4-2 Pi1803e/Pi2001e 4.1 Installing the Printer Driver Using Plug and Play Installation using Plug and Play is not possible on Windows 95 and NT 4.0. Refer to the procedure for using the Add Printer Wizard. Installing the Printer Driver Using Plug and Play Under Window...

4 Installing the Printer Driver 4-4 Pi1803e/Pi2001e Installing the Printer Driver Using Plug and Play Under Windows Me/98SE/98 1 With Windows running, insert the CD-ROM into your computer’s CD-ROM drive. 2 Turn on the machine. 3 When the machine is ready, connect it to the computer with the USB cabl...

Specifying the Option Configuration 5 Pi1803e/Pi2001e 5-1 5 Specifying the Option Configuration Specify the option configuration according to the options installed on the machine. 5.1 Specifying the Option Configuration Displaying Settings Under Windows XP 1 Click the Windows [Start] button, and the...

5 Specifying the Option Configuration 5-2 Pi1803e/Pi2001e ✎ Note The options “Tray3-5” and “Duplex” are only supported by Di1811p/Di2011. Displaying Settings Under Windows 2000/NT 4.0/Me/98SE/98/95 1 Click the Windows [Start] button, point to [Settings], and then click [Printers]. 2 Select the appro...

Printing 6 Pi1803e/Pi2001e 6-1 6 Printing The general printing procedure is described below. As an example, the following describes the procedure for printing from the WordPad application, which is included with Windows. 1 In the application, open the file to be printed, and then click [Print] from ...

Troubleshooting 7 Pi1803e/Pi2001e 7-1 7 Troubleshooting This section describes the errors that can appear during PC printing and what you need to do to correct the situation. If a problem occurs during PC printing, check the following. 7.1 Checking Messages The [Error] indicator lights up and “PRN E...

Troubleshooting 7 Pi1803e/Pi2001e 7-3 7.2 Main Messages The table below describes the main error messages that may appear during the PC print mode operations. Error Message Cause Action PAPER SIZE ERROR The paper size specified for a paper tray differs from the size of paper that is loaded. Load pap...