Konica Minolta IP-011 - Manuals

Introduction IP-011 Printer Controller v ■ Introduction The IP-011 Printer Controller works as an interface between the Konica 7020 series Copier and a workstation, and enables direct printing from a workstation environment. The printer engine on the printer side and the optional network board inclu...

Introduction vi IP-011 Printer Controller ● A part or all of this operating manual shall not be used or copied without permission. ● Konica shall have no liability for any influences caused by using the 7020 series copier +IP-011 system and this manual. ● Information written in this operating manual...

Introduction IP-011 Printer Controller vii ■ About Positioning of This Manual This manual describes how to operate the Printer Controller Konica IP-011 when the Konica 7020 series copier is used as a printer by connecting it to computers or your network. An optional network board (KN-304) is require...

Introduction viii IP-011 Printer Controller ■ System Requirements ● Windows The following are required to print from the Windows*-compliant computers to the Printer Controller. • Computers on which Windows 95/98, WindowsNT 4.0 can run • CD-ROM drive (necessary to install the user software) In case o...

Introduction IP-011 Printer Controller ix ■ Rules in This Manual • Notation of a name of each section in this manual It is written within [ ] (round brackets). (e.g. [Chapter 1: Outline ]) • Notation of names shown on the screen They are written within [ ](braces). (e.g. Click the [OK] button.) • No...

Chapter 1 Outline IP-011 Printer Controller 1-1 Chapter 1 Outline ■ Contents of This Chapter ............................................................ 1-2 ■ Outline of the Printer Controller .................................................. 1-3 ● IP-011 and Printer Engine ..........................

Chapter 1 Outline IP-011 Printer Controller 1-3 ■ Outline of the Printer Controller ● IP-011 and Printer Engine The Konica IP-011 is the Printer Controller (IP-011) which is used to connect the Copier, Konica 7020 series (Konica 7020 series) to computers or a network and to use the Konica 7020 serie...

Chapter 1 Outline 1-4 IP-011 Printer Controller ● IP-011 Hardware Configuration Basic Configuration Configuration of the IP-011 is as follows: Control board CPU: Power PC 401 GF Program memory: FLASH ROM System memory: 16MB SD-RAM Memory The IP-011 is equipped with 16 MB memory as standard and can b...

Chapter 1 Outline IP-011 Printer Controller 1-5 ● Data Flow Status Monitor Control Panel Application Printer Driver IEEE1284 Browser HTML Network (TCP/IP,IPX/SPX) IP-011 IEEE1284 NIC Printer Controller Interface Printer Tools Computer PCI Bus E-RDH Memory Printer Engine Engine Intermediate Language ...

Chapter 1 Outline 1-6 IP-011 Printer Controller ● How to Use Memory Most of memory of the IP-011 is used for rasterizing images and a par t of it is used for the system operation. In addition, E-RDH memory of the Konica 7020 series is used for print processing. The basic memory settings of the IP-01...

Chapter 1 Outline IP-011 Printer Controller 1-7 ● General View The IP-011 is mounted to the Konica 7020 series. The following is the general view. IP-011 Konica 7020 The IP-011 is attached to the back side of the Konica 7020 series. Parallel Port

Chapter 1 Outline 1-8 IP-011 Printer Controller ■ About the Printer Tools ● About the Printer Tools When you install printer driver with “setup.exe” held in the CD-ROM to the computer connected to the system of Konica 7020 series and IP-011, you can select simultaneous installation of the Printer To...

Chapter 1 Outline IP-011 Printer Controller 1-9 ■ About the Printer Driver ● Compliant OS The printer driver can be used on the following OS. Windows 95 Windows 98 Windows NT 4.0 Windows 2000 (to be suppor ted) Refer to “2 Setup” (2-1 page) for how to install the printer driver. Refer to “3 Printer ...

IP-011 IP-011 Printer Controller 2-1 Chapter 2 Setup ■ Contents of This Chapter ............................................................ 2-2 ■ Installation of the Printer Driver ................................................... 2-3 ● Before Installation ...........................................

Chapter 2 Setup IP-011 Printer Controller 2-3 ■ Installation of the Printer Driver ● Before Installation Models and Environment of Computers The Printer Controller for Konica 7020 series, IP-011, can be used with most computers ranging from personal computers to workstations. The IP-011 includes the...

Chapter 2 Setup 2-4 IP-011 Printer Controller ● Installation to Windows95/98 Perform the following steps to install the Konica IP-011 Printer Driver to Windows 95/98. Please keep the “User Software CD” on hand since it is required to install the printer driver. Installation with the “User Software C...

Chapter 2 Setup 2-6 IP-011 Printer Controller Installation by using [Add Printer] In this method, only the printer driver is installed. Turn on the computer and start Windows. When the Windows applications are active, exit from them. Click the [Start] button of the task bar. Then, select [settings] ...

Chapter 2 Setup IP-011 Printer Controller 2-7 ● Installation to WindowsNT4.0 Only authorized system administrators or printer administrators are allowed to install the Konica IP-011 printer driver to WindowsNT4.0. Please keep the “User Software CD” on hand since it is required to install the printer...

Chapter 2 Setup 2-8 IP-011 Printer Controller Installation by Using the “User Software CD” Turn on the computer to start WindowsNT4.0. . Log on as an administrator (or a user entitled to install the Power User, etc.). . Set the “User Software CD” on the CD-ROM drive. Double-click the [My Computer] i...

Chapter 2 Setup 2-10 IP-011 Printer Controller ● Uninstallation of the Printer Driver When any Windows applications are active, quit all of them. . Click the [Start] button of the task bar. Select [Settings] of the Start menu and click the [Control Panel] of the sub menu. The [Control Panel] window ...

Chapter 2 Setup IP-011 Printer Controller 2-11 ■ Test Print You can check whether the printer driver functions properly by performing a test print after the printer driver has been installed. Click the [Start] button of the task bar. Then, select [Settings] of the Start menu and click [Printers] in ...

Chapter 2 Setup 2-12 IP-011 Printer Controller ■ Print from Applications ● Execution of Printing Click the [File] menu of each application and click [Print]. . Check that [Konica IP-011] is shown on [Printer Name] and click [OK]. When [Konica IP-011] is not shown, select it from the list box. Settin...

Chapter 3 Printer Driver IP-011 Printer Controller 3-1 Chapter 3 Printer Driver ■ Contents of This Chapter ........................................................... 3-2 ■ Working Environment ................................................................. 3-3 ● Compliant OS .........................

Chapter 3 Printer Driver IP-011 Printer Controller 3-3 ■ Working Environment ● Compliant OS The Printer Driver can be used on the following OS. Windows 95 Windows 98 Windows NT 4.0 Windows 2000 (to be suppor ted) Refer to “2 Setup” (2-1 page) for installation of the Printer Driver. ■ Property of Pri...

Chapter 3 Printer Driver IP-011 Printer Controller 3-5 ■ Printer Driver Function List The following list summarizes functions (Setting items) which can be set by using the Printer Driver of the Konica 7020 series +IP-011 system. Refer to “ ■ Description of Printer Driver Functions (in the alphabetic...

Chapter 3 Printer Driver 3-8 IP-011 Printer Controller ■ Description of Printer Driver Functions (in the alphabetic order) Functions (setting items) which can be set with the Printer Driver are summarized in the alphabetic order. These settings can be set by using [Star t]-[Settings]-[Printers]- [KO...

Chapter 3 Printer Driver 3-10 IP-011 Printer Controller Copies Click the [ ▲ ] or [ ▼ ] button beside [Setup] tab-[Copies] or directly enter the number of copies from the keyboard. Default of the number of copies is 1. Default By clicking [Setup] tab-[Default] button, settings of the [Setup] tab, [P...

Chapter 3 Printer Driver 3-12 IP-011 Printer Controller End Capture When the virtual printer port is specified on the [End Capture] dialog shown by clicking [Details] tab-[End Capture] button, you can delete a network printer allocated as a virtual printer port. Finisher When the Finisher is attache...

Chapter 3 Printer Driver 3-14 IP-011 Printer Controller [8-Up] [9-Up] When [Booklet] is selected in the Duplex printing, [2-Up] is automatically selected and you can not select other settings. When [Setup] tab-[Print Page Borders] check box is selected, you can print borders between gathered documen...

Chapter 3 Printer Driver 3-18 IP-011 Printer Controller Settings of the two-way communication function The [Spool Settings] dialog shown by clicking the [Details] tab-[Spool settings] button enables you to perform settings of spooling and the bi- directional communication function. When [Enable bi-d...

Chapter 3 Printer Driver 3-20 IP-011 Printer Controller In addition, when Staple is specified, you can not select Alternate. You can not staple at two positions for the paper of B5R or smaller. Stapling is performed in accordance with orientations as follows: 1- Left (portrait) 1- Left (landscape) 1...

IP-011 IP-011 Printer Controller 4-1 Chapter 4 Control Panel Setup ■ Contents of This Chapter ............................................................ 4-2 ■ About the Control Panel .............................................................. 4-3 ● The Control Panel of the Copier .................

Chapter 4 Control Panel Setup IP-011 Printer Controller 4-3 ■ About the Control Panel ● The Control Panel of the Copier [SCANNER/PRINTER] button Switches to the printer mode. LCD Displays the status of the Printer Controller, menus related to settings and options to be selected are displayed on the ...

Chapter 4 Control Panel Setup 4-4 IP-011 Printer Controller ● How to Enter Settings on the LCD Panel You can enter settings from the printer mode basic screen shown on the LCD by using either the item selection or the information entry. Item Selection In this method, various settings are performed b...

Chapter 4 Control Panel Setup IP-011 Printer Controller 4-5 ● Printer Mode Basic Screen When the Konica 7020 series +IP-011 system starts properly, the printer mode basic screen is displayed on the LCD by pressing the [SCANNER/PRINTER] button. ● Printer Menu Screen The following printer menu screen ...

Chapter 4 Control Panel Setup 4-6 IP-011 Printer Controller ● Printer Setting screen When “1. Setting” on the printer menu screen is selected, the Printer Setting screen is displayed. When an item is selected on the Printer Setting screen, each setting screen corresponding to the selected item is di...

Chapter 4 Control Panel Setup IP-011 Printer Controller 4-7 ● Procedures of the Printer Setting The following show the procedures of the printer setting by using the LCD Panel; Press the [SCANNER/PRINTER] button to show the printer mode basic screen. The copy mode basic screen is switched to the pri...

Chapter 4 Control Panel Setup IP-011 Printer Controller 4-9 ■ Configuration of Printer Setting Menu 1 Network Setup *This menu is displayed only when the KN-304 is attached. 2 Select Language For US : English Only 1 Set IP Mode 2 Set IP Manually 3 LPD Banner Enable 1 Server Name 2 Server Password 3 ...

Chapter 4 Control Panel Setup 4-10 IP-011 Printer Controller 1 Off 2 On 3 Print Quality 4 I/O Timeout 5 Test Print 6 CMD Error Page 7 Error Page 8 Factory Default 9 Help 1 5 2 10 3 15 4 20 5 30 1 Smoothing For US : Not available 2 Page Protection 1 Demo/Configuration Page 2 NIC Configuration 1 Off 2...

Chapter 4 Control Panel Setup IP-011 Printer Controller 4-11 ■ Functions of the Printer Setting ● Network Setup Select [1. Setting]-[1. Network Setup] on the Printer Setting screen to display the network setup screen. [1. Network setup] is displayed only when the KN-304 is attached. Items of the net...

Chapter 4 Control Panel Setup 4-12 IP-011 Printer Controller ● Print Quality Select [1. Setting]-[3. Print Quality] on the Printer Setting screen to display the Print Quality Setup screen. Items of the Print Quality Setup screen are as follow: [1. Smoothing] Press [1] to display the Smoothing Setup ...

Chapter 4 Control Panel Setup IP-011 Printer Controller 4-13 ● Test Print Select [1. Setting]-[5. Test Print] on the Printer Setting screen to display the Test Print Setup screen. Items of the Test Print Setup screen are as follows: [1. Demo/Configuration Page] Press [1] to print the Demo/Configurat...

Chapter 4 Control Panel Setup 4-14 IP-011 Printer Controller ● Factory Default Select [1. Setting]-[8. Factory Default] on the printer mode basic screen to return various settings to the factory default. Items of the Factory Default are as follows: [Language]: English [Smoothing]: Off [Page Protecti...

IP-011 Printer Controller 5-1 Chapter 5 Status Monitor and Control Panel ■ Contents of This Chapter ............................................................ 5-2 ■ Status Monitor and Control Panel ............................................... 5-3 ● About the Status Monitor ........................

Chapter 5 Status Monitor and Control Panel IP-011 Printer Controller 5-3 ■ Status Monitor and Control Panel The Printer Tools is the generic name of two programs, “Status Monitor” and “Control Panel” which are used on computers connected to the Konica 7020 series +IP-011 system. ● About the Status M...

Chapter 5 Status Monitor and Control Panel 5-4 IP-011 Printer Controller ■ Working Environment ● Compliant OS The Status Monitor and the Control Panel can be used on the following OS. Windows 95 Windows 98 Windows NT4.0 Windows 2000 (to be supported) ● Interface The interface which the Status Monito...

Chapter 5 Status Monitor and Control Panel IP-011 Printer Controller 5-5 ■ How to Operate the Status Monitor ● Starting the Status Monitor In the case that you set the Status Monitor to automatically start at the time of installing the Printer Tools, the Status Monitor automatically starts when a co...

Chapter 5 Status Monitor and Control Panel 5-6 IP-011 Printer Controller ● Show/Hide the Status Monitor When the [Close] button is clicked when the Status Monitor is displayed, the Status Monitor is hidden (displayed as an icon on the task bar.). When the Status Monitor icon on the task bar is click...

Chapter 5 Status Monitor and Control Panel IP-011 Printer Controller 5-7 ● Display Change Display of the Status Monitor can be selected from either [Expand] or [Reduce]. Normally, the Status Monitor starts in the [Reduce] display. In the [Expand] display, when a problem related to the printer occurs...

Chapter 5 Status Monitor and Control Panel 5-8 IP-011 Printer Controller ■ How to Operate the Control Panel ● Starting the Control Panel Select [Printer Setting] from the [Setup] menu of the Status Monitor window. The [Konica IP-011 Control Panel] dialog is displayed. ● Finishing the Control Panel C...

Chapter 5 Status Monitor and Control Panel IP-011 Printer Controller 5-9 ● Buttons of the Control Panel [OK] When the [OK] button is clicked, data of all settings of the tab is sent to the printer. Then, the [Konica IP-011 Control Panel] dialog is closed and the [Konica IP-011 Status Monitor] window...

Chapter 5 Status Monitor and Control Panel 5-10 IP-011 Printer Controller ● Settings of Paper Click the [Paper] tab of the [Konica IP-011 Control Panel] dialog. The [Paper] tab of the [Konica IP-011 Control Panel] dialog is displayed. On the list shown by clicking the [ ▼ ] button beside [Paper Size...

Chapter 5 Status Monitor and Control Panel IP-011 Printer Controller 5-11 ● Printer Setting Click the [Printer Setting] tab of the [Konica IP-011 Control Panel] dialog. The [Printer Setting] tab of the [Konica IP-011 Control Panel] dialog is displayed. Click either [Auto] or [On] of the [Page Protec...

Appendix A Troubleshooting IP-011 Printer Controller Appendix A-1 Appendix A Trouble Shooting ■ Error Message ........................................................... Appendix A-2 ■ Basic Troubleshooting ................................................ Appendix A-3 ■ General Problems of Printing ...

IP-011 Printer Controller Appendix A-3 ■ Basic Troubleshooting This section describes how to troubleshoot. If troubles are not removed by using the following countermeasures, contact a service provider. There are some basic conditions which cause various abnormalities. Before taking a trouble as a s...

Appendix A Troubleshooting Appendix A-4 IP-011 Printer Controller ● A message to demand a paper size which you do not use is displayed. Cancel the job to change the paper size of “Page (Paper) Setup” dialog on an applica- tion. ● You can not print the test print Check the LCD of the copier Control P...

IP-011 Printer Controller Appendix A-5 ● The print setting of a job does not correspond to the result of printing. Check that the printer setting is not changed. Refer to “5 Status Monitor and Control Panel” Printer Setting “(5-11 page) or ”3 Printer Driver “ Printer Driver Function List” for the pr...

Appendix B Product Specifications IP-011 Printer Controller Appendix B-1 Appendix B Product Specifications ■ Product Specifications ............................................... Appendix B-2

index IP-011 Printer Controller index-1 index index ........................................................................................ index-2

2000. 1 1 MAUFACTURER KONICA CORPORATION TOKYO JAPAN