Konica Minolta Di2010 - Manuals

Contents iv Di2010/Di2510/Di3010/Di3510 To set the “Density (ADF only)” function (Only when the duplexing document feeder is installed) .............. 5-30 5.4 Registering an Image Stamp ..................................................... 5-31 To register an image stamp ..............................

Contents Di2010/Di2510/Di3010/Di3510 v 6.5 Setting Account Registration..................................................... 6-17 Account Registration ..................................................................... 6-17To register accounts..........................................................

Contents vi Di2010/Di2510/Di3010/Di3510 7.5 Consumables .............................................................................. 7-22 Paper ............................................................................................ 7-22Toner Bottle ...............................................

Contents Di2010/Di2510/Di3010/Di3510 vii Basic Operations For details on the following topics, refer to the “Basic Operations” volume of this User Manual. 1 Introduction 2 Available Features 3 Before Making Copies 4 Basic Copy Operations 5 Copy Paper 6 Original Documents 7 Specifying Copy Settings 8...

1 1.1 Introduction 1-2 Di2010/Di2510/Di3010/Di3510 Int ro duc tio n Chap ter 1 1.1 Introduction Structure of the Manual This manual is divided into two parts: Advanced Operations and Basic Operations. The Advanced Operations volume of this User Manual contains precautions on the use of this copier. ...

1.2 Explanation of Manual Conventions 1 Di2010/Di2510/Di3010/Di3510 1-3 Int ro duc tio n Chap ter 1 1.2 Explanation of Manual Conventions The marks and text formats used in this manual are described below. WARNING Failure to observe instructions highlighted in this manner may result in fatal or crit...

1 1.3 Explanation of Basic Concepts and Symbols 1-4 Di2010/Di2510/Di3010/Di3510 Int ro duc tio n Chap ter 1 1.3 Explanation of Basic Concepts and Symbols The use of words and symbols in this manual are explained below. Paper Feeding During printing, paper is supplied from the right side of the copie...

1.3 Explanation of Basic Concepts and Symbols 1 Di2010/Di2510/Di3010/Di3510 1-5 Int ro duc tio n Chap ter 1 “Width” and “Length” Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “Y” in the illustration) and the second to the le...

1 1.3 Explanation of Basic Concepts and Symbols 1-6 Di2010/Di2510/Di3010/Di3510 Int ro duc tio n Chap ter 1 Display Icons Plain paper Thick paper Overhead projector transparencies Envelope Paper Supply Icons The icons shown below may appear, indicating that no more paper remains. The paper is empty.

Sa fety Inf or mat ion Ch apte r 2 2 2 Safety Information

2 2.1 Warning and Precaution Symbols 2-2 Di2010/Di2510/Di3010/Di3510 Sa fety Inf or mat ion Ch apte r 2 This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instruct...

2.2 Meaning of Symbols 2 Di2010/Di2510/Di3010/Di3510 2-3 Sa fety Inf or mat ion Ch apte r 2 WARNING • Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. • Do not attempt to remove the covers...

2.3 Precautions for Routine Use 2 Di2010/Di2510/Di3010/Di3510 2-5 Sa fety Inf or mat ion Ch apte r 2 2.3 Precautions for Routine Use 2.4 USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users) NOTE: This equipment has been tested and found to comply with the limits for a Class A d...

2 2.5 Laser Safety 2-6 Di2010/Di2510/Di3010/Di3510 Sa fety Inf or mat ion Ch apte r 2 INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 IS-SUE 3) (For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 d...

2.5 Laser Safety 2 Di2010/Di2510/Di3010/Di3510 2-9 Sa fety Inf or mat ion Ch apte r 2 For Norway Users Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølgelengde er 770-795 nm. Laser Safety Label A laser safety label is attached to the outside of the machine as shown below. Ozon...

2 2.5 Laser Safety 2-10 Di2010/Di2510/Di3010/Di3510 Sa fety Inf or mat ion Ch apte r 2 Acoustic Noise For European Users Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A). REMARQUE = Placer l’apparei...

3 3.1 Installation Precautions 3-2 Di2010/Di2510/Di3010/Di3510 P rec auti on s Chap ter 3 3.1 Installation Precautions Installation Site To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements. - A location away from curtains,...

3.1 Installation Precautions 3 Di2010/Di2510/Di3010/Di3510 3-3 P rec auti on s Chap ter 3 Space Requirements To ensure easy machine operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. ✎ Note Be sure to allow a clearance of 4 in. (100 mm) or mo...

3 3.2 Operation Precautions 3-4 Di2010/Di2510/Di3010/Di3510 P rec auti on s Chap ter 3 3.2 Operation Precautions Operating environment The environmental requirements for correct operation of the copier are as follows. G Temperature: 59°F (15°C) to 95°F (35°C) with fluctuations of no more than 18°F (...

3.2 Operation Precautions 3 Di2010/Di2510/Di3010/Di3510 3-5 P rec auti on s Chap ter 3 CAUTION If the ventilation duct at the top of the copier becomes blocked, the inside of the copier will accumulate heat, resulting in a malfunction or fire. ➜ Do not place any objects over the ventilation duct. CA...

3.3 Legal Restrictions on Copying 3 Di2010/Di2510/Di3010/Di3510 3-7 P rec auti on s Chap ter 3 3.3 Legal Restrictions on Copying Certain types of documents must never be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but...

3 3.3 Legal Restrictions on Copying 3-8 Di2010/Di2510/Di3010/Di3510 P rec auti on s Chap ter 3

Au xi liar y F unc tio n s Ch apte r 4 4 4 Auxiliary Functions

4 4.1 “Cover Mode” Function 4-2 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 This chapter contains descriptions on making copies using the Auxiliary functions. 4.1 “Cover Mode” Function Adding Cover Pages When two or more sheets are being copied, cover pages using paper other t...

4.1 “Cover Mode” Function 4 Di2010/Di2510/Di3010/Di3510 4-3 Au xi liar y F unc tio n s Ch apte r 4 G Front Cover: With ImageBack Cover: None G Front Cover: With ImageBack Cover: Blank G Front Cover: With ImageBack Cover: With Image To make settings for the “Cover Mode” function 1 Load the document i...

4 4.1 “Cover Mode” Function 4-4 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 3 Select the desired Front Cover and Back Cover settings, and then touch the button below “Cover Paper”. 4 Select the paper drawer that contains the paper for the cover pages, and then touch [Enter]. 5...

4.2 “Page Insertion” Function 4 Di2010/Di2510/Di3010/Di3510 4-5 Au xi liar y F unc tio n s Ch apte r 4 4.2 “Page Insertion” Function Inserting Pages (Interleaves) Between Copies When two or more sheets are being copied, paper (interleaves) other than the doc-ument paper can be inserted. ✎ Tip At the...

4.3 “OHP Interleaving” Function 4 Di2010/Di2510/Di3010/Di3510 4-7 Au xi liar y F unc tio n s Ch apte r 4 4.3 “OHP Interleaving” Function Inserting Pages Between Copies of Transparencies When copying overhead projector transparencies, paper (interleaves) can be in-serted between copies of the transpa...

4 4.4 “File Margin” Function 4-10 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.4 “File Margin” Function Making Copies With Binding Margins Copies can be made with binding margins and the image shifted to the side so that the text is not hidden when the copies are bound. File ...

4 4.5 “Edge/Frame Erase” Function 4-12 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.5 “Edge/Frame Erase” Function Erasing Sections of Copies When copying documents with punch holes, the pages can be printed with part of the document erased. Edge/Frame Erase settings G The lef...

4.5 “Edge/Frame Erase” Function 4 Di2010/Di2510/Di3010/Di3510 4-13 Au xi liar y F unc tio n s Ch apte r 4 To make settings for the “Edge/Frame Erase” function 1 Load the document into the duplexing document feeder or position it on the original glass. 2 Touch [Auxiliary], and then touch [Edge/Frame ...

4 4.6 “Image Repeat” Function 4-14 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.6 “Image Repeat” Function Printing Multiple Copies of the Same Document Page on One Sheet The “Image Repeat” function can be used as shown below. G To copy a Letter-size page at full size onto an ...

4 4.7 “Distribution #” Function 4-16 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.7 “Distribution #” Function Printing Distribution Numbers on Sets of Copies Each set of copies can be printed with a distribution number added to the back-ground. ✎ Tip If the “Distribution #” f...

4 4.8 “Watermark” Function 4-18 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.8 “Watermark” Function Printing Copies with a Watermark Copies can be printed with a watermark added to the background. To make settings for the “Watermark” function 1 Load the document into the dupl...

4 4.9 “Image Stamping” Function 4-20 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.9 “Image Stamping” Function With this function, copies can be printed with a watermark of a scanned image add-ed to the background. Refer to “Registering an Image Stamp” on page 5-31 for registr...

4 4.10 “Black-White Reverse” Function 4-22 Di2010/Di2510/Di3010/Di3510 Au xi liar y F unc tio n s Ch apte r 4 4.10 “Black-White Reverse” Function Reversing White- and Black-Colored Areas of Copies Copies can be printed with the white- and black-colored areas of the original image reversed. ✎ Tip The...

4.11 “Separate Scan” Function 4 Di2010/Di2510/Di3010/Di3510 4-23 Au xi liar y F unc tio n s Ch apte r 4 4.11 “Separate Scan” Function Scanning a Document in Separate Batches When copying a document with a large number of pages, the document can be di-vided and scanned in separate batches, and then i...

Util it y M ode O per at ion s Cha p ter 5 5 5 Utility Mode Operations

5 5.1 Utility Mode Screens 5-2 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 5.1 Utility Mode Screens This chapter contains descriptions on the various copy programs and settings avail-able in the Utility mode. Utility screen This screen appears when the [Utility] key is pre...

5.1 Utility Mode Screens 5 Di2010/Di2510/Di3010/Di3510 5-3 Util it y M ode O per at ion s Cha p ter 5 Meter Count screen This screen shows the total number of copies printed since the copier was installed. Copy Job Program Recall screen From this screen, a programmed copy job can be recalled. User M...

5.2 User’s Choice Functions 5 Di2010/Di2510/Di3010/Di3510 5-5 Util it y M ode O per at ion s Cha p ter 5 5.2 User’s Choice Functions The functions available on the User’s Choice screen are described below. Changing the settings for the following functions changes the default setting (the setting sel...

5.3 Changing Default Settings 5 Di2010/Di2510/Di3010/Di3510 5-7 Util it y M ode O per at ion s Cha p ter 5 5.3 Changing Default Settings The procedures for changing each of the User’s Choice settings are described be-low. To set the “Memory Recall” function This function is used to specify whether o...

5 5.3 Changing Default Settings 5-10 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 To set the “Original Ö Copy Default” function The function specifies the default Orig. Ö Copy setting. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [2/6], and then touch [Origin...

5.3 Changing Default Settings 5 Di2010/Di2510/Di3010/Di3510 5-13 Util it y M ode O per at ion s Cha p ter 5 To set the “Special Paper” function This function is used to specify the default paper type for a paper drawer when special paper, for example, recycled paper, is loaded into a particular pape...

5 5.3 Changing Default Settings 5-16 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 To set the “Sleep Mode Setting” function This function is used to specify the period of time where there is no input, after which the copier automatically turns the printer heater off. To disp...

5.3 Changing Default Settings 5 Di2010/Di2510/Di3010/Di3510 5-21 Util it y M ode O per at ion s Cha p ter 5 To set the “Density Priority” function This specifies the default printing density / copy mode settings. 1 Press the [Utility] key. 2 Touch [User’s Choice]. 3 Touch [4/6], and then touch [Dens...

5.4 Registering an Image Stamp 5 Di2010/Di2510/Di3010/Di3510 5-31 Util it y M ode O per at ion s Cha p ter 5 5.4 Registering an Image Stamp Before the Auxiliary function “Image Stamping” can be used, an image must be reg-istered. A maximum of five images can be registered. For details on using the “...

5.4 Registering an Image Stamp 5 Di2010/Di2510/Di3010/Di3510 5-33 Util it y M ode O per at ion s Cha p ter 5 9 Position the document on the glass, and then select the orientation of the document. 10 Press the [Start] key.The image is scanned. The image stamp is registered.

5 5.5 Viewing Counters (“Meter Count” Function) 5-34 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 5.5 Viewing Counters (“Meter Count” Function) With the “Meter Count” function, the following counters can be viewed. To view the counters 1 Press the [Utility] key. 2 Touch [Me...

5.6 Using Copy Programs 5 Di2010/Di2510/Di3010/Di3510 5-35 Util it y M ode O per at ion s Cha p ter 5 5.6 Using Copy Programs Up to 10 sets of copy settings can be stored as copy programs. To store a copy program 1 Press the [Mode Check] key. 2 Touch [Job Mem Input], and then touch the number where ...

5 5.6 Using Copy Programs 5-36 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 To delete a copy program Individual copy programs can be deleted. 1 Press the [Mode Check] key. 2 Touch [Job Mem Input]. 3 Touch [Delete], and then touch number to delete. ❍ The copy program is dele...

5 5.7 User Management Functions 5-38 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 5.7 User Management Functions The following settings can be specified or operations can be performed from the User Management screen. G Confirmation beep volume G Alarm beep volume G Touch pan...

5.7 User Management Functions 5 Di2010/Di2510/Di3010/Di3510 5-39 Util it y M ode O per at ion s Cha p ter 5 1 Press the [Utility] key. 2 Touch [User Management], and then touch the button for the beep that you wish to adjust. 3 Touch and to select the desired volume, and then touch [Enter]. 4 Touch ...

5 5.7 User Management Functions 5-40 Di2010/Di2510/Di3010/Di3510 Util it y M ode O per at ion s Cha p ter 5 To dehumidify the duplexing document feeder (“Dehumidify” function) When there are rapid changes in the temperature of a room, or high humidity, con-densation* 1 may occur on the surface of th...

6 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6 Administrator Management Operations

6 6.1 Administrator Management Screens 6-2 Di2010/Di2510/Di3010/Di3510 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.1 Administrator Management Screens To display the Administrator Management screens This explains the method for displaying the Administrator Management screens. 1 Pres...

6 6.2 Initial Settings 6-4 Di2010/Di2510/Di3010/Di3510 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.2 Initial Settings Specify the date and time Specify the date and time so that they will be correctly recorded in the reports. To set the date and time 1 Follow the procedure describe...

6.2 Initial Settings 6 Di2010/Di2510/Di3010/Di3510 6-5 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 5 Use the 10-Key Pad to type in the current date and time, and then touch [Enter]. ❍ To re-enter the entered value, press the [C] key. ❍ Touch the button for the year, month, day, hour ...

6.3 Administrator Settings 6 Di2010/Di2510/Di3010/Di3510 6-7 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.3 Administrator Settings Changing the administrator access code This explains the method to specify or change the administrator access code. To set the administrator access code...

6.4 Account Management Settings 6 Di2010/Di2510/Di3010/Di3510 6-11 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.4 Account Management Settings Account Management Mode The number of copies and the number of prints can be managed per account. Ad-ditionally, users can be limited by mana...

6 6.4 Account Management Settings 6-12 Di2010/Di2510/Di3010/Di3510 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 To set the Account Management Mode You can manage the number of pages that can be copied per account. 1 Follow the procedure described in “To display the Administrator Manag...

6.4 Account Management Settings 6 Di2010/Di2510/Di3010/Di3510 6-15 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 Clear all counters 1 Follow the procedure described in “To display the Administrator Management screens” on page 6-2 to display the Administrator Management screen. 2 Touch ...

6.5 Setting Account Registration 6 Di2010/Di2510/Di3010/Di3510 6-17 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.5 Setting Account Registration Account Registration Accounts can be registered for departments in a company or for individuals. The number of prints can be restricted for...

6 6.5 Setting Account Registration 6-20 Di2010/Di2510/Di3010/Di3510 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 Account Counter The number of prints made by each account can be checked. To check the number of prints made by each account 1 Follow the procedure described in “To display...

6.6 Setting Machine Access 6 Di2010/Di2510/Di3010/Di3510 6-21 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.6 Setting Machine Access Get Penalty The “Get Penalty” function is used to specify whether (“On”) or not (“Off”) access to Administrator mode, mailbox print jobs and user boxes...

6.7 Configuring Functions (Soft Switches) 6 Di2010/Di2510/Di3010/Di3510 6-23 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.7 Configuring Functions (Soft Switches) Soft switches for functions can be set according to your use. ✎ Note Do not alter any modes or bits not mentioned in this...

6 6.7 Configuring Functions (Soft Switches) 6-24 Di2010/Di2510/Di3010/Di3510 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 Specifying Settings for Resetting Copy Mode with the Duplexing Document Feeder Installed (Mode 429) Settings can be specified for the time until Copy mode is reset...

6.8 Removing Penalties 6 Di2010/Di2510/Di3010/Di3510 6-25 A dm in is tr ator M ana gem ent O p er ati ons Ch apt er 6 6.8 Removing Penalties Free Penalty If the “Get Penalty” function is set to “ON” and the optional printer controller is in-stalled, the penalty must be removed in order to allow acce...

7 7.1 Specifications 7-2 Di2010/Di2510/Di3010/Di3510 Ap pen dix Chap ter 7 7.1 Specifications Copier Di2010/Di2510/Di3010/Di3510 Specification Type Desktop Platen Fixed platen (mirror scanning) Photo conductor OPC Copying system Digital laser copying Developing system MTHG developing method Fusing s...

7 7.1 Specifications 7-4 Di2010/Di2510/Di3010/Di3510 Ap pen dix Chap ter 7 Duplexing Document Feeder AFR-19 Mixed Width Document Sizes 2 : Copying possible —: Copying not possible Specification Document feed methods Standard method: Single-sided and double-sided documents“Mixed Orig Detection” funct...

7 7.2 Care of the Copier 7-10 Di2010/Di2510/Di3010/Di3510 Ap pen dix Chap ter 7 7.2 Care of the Copier Cleaning Set the power switch of the copier to “O” before cleaning it. Housing cover ➜ Clean the surface of the housing cover by wiping it with a soft cloth dampened with a mild household detergent...

7 7.3 Function Combination Table 7-12 Di2010/Di2510/Di3010/Di3510 Ap pen dix Chap ter 7 7.3 Function Combination Table

7.3 Function Combination Table 7 Di2010/Di2510/Di3010/Di3510 7-17 Ap pen dix Chap ter 7 *a: The function selected first is not performed if documents of mixed sizes are being copied. (* 2 ) *b: The function selected later is not performed if documents of mixed sizes are being copied. (* 2 ) :This se...

7 7.4 Paper Size and Zoom Ratio Tables 7-18 Di2010/Di2510/Di3010/Di3510 Ap pen dix Chap ter 7 7.4 Paper Size and Zoom Ratio Tables Paper Sizes Paper Format Metric Size English Size A3 Wide 311 mm × 457 mm 12-1/4 in. × 18 in. A3 297 mm × 420 mm 11-3/4 in. × 16-1/2 in. A4 210 mm × 297 mm 8-1/4 in. × 1...

7 7.5 Consumables 7-22 Di2010/Di2510/Di3010/Di3510 Ap pen dix Chap ter 7 7.5 Consumables In order to maintain the condition of this machine, the following consumables are needed. For best copy quality, we recommend that the specified supplies be used. For information on or for purchasing supplies, c...

7.5 Consumables 7 Di2010/Di2510/Di3010/Di3510 7-23 Ap pen dix Chap ter 7 Staple Cartridges MS-5D for the finisher Staples for staple binding 5,000 staples are provided in the staple cartridge. MS-2C for the saddle kit Staples for staple binding 2,000 staples are provided in the staple cartridge.

8 8.1 Index 8-2 Di2010/Di2510/Di3010/Di3510 Ind ex Ch apte r 8 8.1 Index Numerics 2way Paper feed cabinet .................................................................... 7-6 A Account management ....................................................................... 6-11 Account registration .....