Konica Minolta 7075 - Manuals

Contents Section 3: Machine Information (continued) Automatic Magnification Selection (AMS) .................................................................. 3-11Automatic Exposure Selection (AES) ......................................................................... 3-11Automatic Tray Switching...

Contents Section 5: Copier Management Power Saver Mode ....................................................................................................... 5-2 Auto Low Power ..................................................................................................... 5-2Manual Low Power ...

Contents Section 6: Basic Operations (continued) Rotation ....................................................................................................................... 6-31 90 ° Rotation ..........................................................................................................

Contents Section 9: Applications Application Function Menu ........................................................................................... 9-2Sheet/Cover Insertion ................................................................................................... 9-3Chapter ................

Contents Section 12: Shortcuts Set Reserve Job ......................................................................................................... 12-2Store Originals Scanned from Platen ......................................................................... 12-2Store Originals Scanned from ...

Contents Section 14: Maintenance & Supplies (continued) Preventive Maintenance ........................................................................................... 14-10 Reading the PM Count ...................................................................................... 14-10Printi...

Introduction 1-1 Section 1: Introduction To the User Key Operator Functions Copier Service, Repairs & Supplies Machine Labels Control Panel with Interactive Touch Screen Overview of the User’s Manual Help Mode Product Overview Features of the Konica 7075 Copier Features Standard Equipment Option...

1-2 Introduction Introduction To the User Welcome to the Konica 7075 Workgroup Document System™. The following topicsrelate to general product information and provide tips on using this manual. Key Operator Functions Custom settings can be made by the key operator or anyone who is responsible for th...

Introduction 1-3 Introduction To the User (continued) Overview of the User’s Manual To enjoy optimal performance, read this manual before using the copier. Be sure to handlethe machine and perform all copying operations only as recommended in the manual.Keep the manual located with the machine so th...

1-4 Introduction Introduction Product Overview The Konica 7075 is a digital printer/copier that can be used as a stand-alone copier, or itcan be used as a high-speed network printer when connected to the optional IP-601Image Processor. The Konica 7075 can also be used as a print server on a network ...

Introduction 1-5 Introduction Features of the Konica 7075 • 600dpi ModeScan in higher resolution (600dpi) than in normal mode (400dpi). • All-Image AreaMake copies printed completely to the edges to avoid image loss. • AES - Automatic Exposure SelectionAutomatically adjust exposure to compensate for...

1-8 Introduction Introduction Features of the Konica 7075 (continued) • Non STD Size for Multi-Sheet Bypass TrayEnter the special paper size to be loaded on the Multi-sheet bypass tray using the touchscreen keypad in order to avoid paper misfeed. • Non STD Size for OriginalIdentify the special origi...

Introduction 1-9 Introduction Features of the Konica 7075 (continued) • Program JobScan documents into memory while designating a different copy condition for eachoriginal, then print all the images collectively. • Proof CopyTo ensure correct output before running multiple copies, run a proof copy b...

Introduction 1-11 Introduction Copier Features Standard Equipment Main Body with 3 Paper Trays (500/500/1,000 sheets)Reversing Automatic Document Feeder (RADF) (DF-313)Automatic Duplex Unit (ADU)Configuration Options: with Multi-Sheet Bypass Tray (150 sheets) Optional Equipment Stapler Finisher (FS-...

1-12 Introduction Introduction Copier Features (continued) Optional Equipment (continued) Stapler Finisher (FS-108B) (continued) Booklet tray: Stapled and folded, or simply folded booklets are to be delivered onto thistray. These two finishing modes can be specified on the Finisher Mode Selection Sc...

Safety Information 2-1 Section 2: Safety Information User Instructions Machine Labels Label Locations Regulations FCC Regulations Canadian Department of Communications Regulations FDA Regulations Machine Installation and Power Requirements Machine Handling and Care Routine Safety Finisher Capacity R...

2-2 Safety Information Safety Information User Instructions The following pages include important safety information, which should be read andunderstood before you attempt to operate the machine. If you have any concerns aboutsafety matters, please contact your service representative. Keep this manu...

Safety Information 2-3 Safety Information Machine Labels Label Locations (Both sides of the fixing unit) (Inside of the fixing unit) (Front side of the fixing unit) (Top surface of the fixing unit) WARNING DANGER ADVERTENCIA ADVERTÊNCIA ATTENTION CAUTION PRECAUCION CUIDADO High temperature! Températ...

2-4 Safety Information Safety Information Inside the lower paper exit outlet is the roller drive unit.DO NOT put your hand into it; otherwise you may be injured. Use care after opening the paper exit outlet. DO NOT put your hand into it; otherwise you may be injured. CAUTION CAUTION FS-108B Finisher...

Safety Information 2-5 Safety Information Machine Labels (continued) Label Locations (continued) • Avoid getting burned. Do not touch any machine area that you are advised not to touch by a warning/caution label. • Do not remove warning/caution labels. If any warning/caution label is removed or if a...

2-6 Safety Information Safety Information Regulations FCC Regulations Warning: The Konica 7075 generates, uses, and can radiate radio frequency energy. Ifit is not installed and used in accordance with the instruction manual, interference withradio communications may result. This equipment has been ...

Safety Information 2-7 Safety Information Machine Installation and Power Requirements CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/ORMACHINE DAMAGE ❒ FIRE PREVENTION Install machine away from flammable or volatile materials. Routinely check for abnormalheat from po...

2-8 Safety Information Safety Information Machine Installation and Power Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE,OVERHEATING, RISK OF ELECTRICAL SHOCK, AND/OR PERSONAL INJURY ❒ PLUG SOCKET A plug socket is limited in capacity. Use an excl...

Safety Information 2-9 Safety Information Machine Handling and Care WARNING: FAILURE TO HEED THE FOLLOWING WARNING MAY RESULT IN DEATH OR SERIOUS INJURYAND/OR MACHINE DAMAGE ❒ MACHINE CONTACT Never touch internal high voltage area indicated with a WARNING label.Never touch the drum surface.Never put...

2-10 Safety Information Safety Information Routine Safety CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE,OVERHEATING, AND/OR PERSONAL INJURY ❒ PERIODIC CHECK Check for loose connection or excessive heat on power plug, damage to power cordand/or plug (creased, frayed, sc...

Safety Information 2-11 Safety Information Finisher Capacity Requirements CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/ORMACHINE DAMAGE ❒ FINISHER PAPER CAPACITY To prevent paper misfeed, do not exceed the paper capacity of the Finisher.FS-108/FS-108B Finisher pape...

2-12 Safety Information Safety Information Finisher Capacity Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/ORMACHINE DAMAGE ❒ FS-108B FINISHER BOOKLET MODE OUTLET Inside the Booklet mode outlet is the roller drive unit. DO NOT put your hand ...

Machine Information 3-1 Section 3: Machine Information Machine Configuration External Machine Call-Outs Internal Machine Call-Outs Optional Equipment Site Requirements Control Panel Layout Touch Screen Basic Screen Initial Settings Auto/Reset Mode Automatic Paper Selection (APS) Automatic Magnificat...

3-2 Machine Information Machine Information Machine Configuration External Machine !5 TU-108 Trimmer unit (option) !6 Trimmer stacker cover !8 LCD touch screen !9 Control panel q RADF w Work table e Multi-sheet bypass tray r LCT top door t Tray 4: Large capacity tray LT-401(option) y LCT left side d...

Machine Information 3-3 Machine Information Machine Configuration (continued) External Machine Call-outs 1 RADF (Reversing Automatic Document Feeder) automatically feeds multiple originals one at a time to the platen glass for copying. 2 Work table provides a convenient workspace for documents both ...

3-4 Machine Information Machine Information Machine Configuration (continued) Internal Machine Internal Machine Call-outs 1 Toner bottle holds toner and is to be replaced when supplying toner.2 Toner unit holds the toner supply.3 Drum unit forms the copy image.4 Lever A can be moved to withdraw the ...

Machine Information 3-5 Machine Information Machine Configuration (continued) Optional Equipment FS-108/108B Finisher details Secondary (sub) tray:Holds sets ejected in q Non-sort Face Down exit mode w Non-sort Face Up exit mode e Group Face Down exit mode r Group Face Up exit mode Finisher door Man...

Machine Information 3-7 Machine Information Site Requirements 47.35 (1203) 63.1 (1603) 18.7 (475) 34.9 (887) 69.4 (1762) 72.6 (1845) 30.5 (775) 37.4 (950) 4.7 (120) Unit: inches (mm) Konica 7075 15.75 (400) 15.75 (400) 1 2 3 1 1 2 3 4 92.3 (2344) 71.4 (1814) 21.7 (550) 12.65 (321) 3.9 (100) 3.9 (100...

Machine Information 3-9 Machine Information Control Panel Layout 1 LCD TOUCH SCREEN displays machine and copying status; help information; interactive screens; and touch keys for selecting all functions. 2 CHECK displays a screen showing all settings that are selected for the current job.3 MODE swit...

3-10 Machine Information Machine Information Touch Screen The touch screen is an LCD that displays interactive screens with touch sensitive keysfor making copy job selections. Selections are highlighted at the touch. The screens alsowork with the conventional control panel keys. CAUTION: The touch s...

Machine Information 3-11 Machine Information Initial Settings Initial settings represent the initial condition when power is turned on; when ECMpassword is set; or when Auto/Reset mode is restored, either manually or automatically. Print Quantity; 1Magnification Ratio: 1:1 (key operator setting)RADF...

3-12 Machine Information Machine Information Lead Edge Delete When using the RADF, image deletion of a few millimeters will occur on the lead edgefor the purpose of controlling copy quality and copy reliability, unless deactivated by thekey operator. See p. 13-40 to p. 13-45. Service Settings The fo...

Machine Information 3-13 Machine Information Service Settings (continued) Staple Sheet Capacity Staple capacity is changeable, and may be set to 45, 40, or 35 by service. Notice Message: ADD TONER/ PM CALL Service can set the copier message area to display “ADD TONER” when the tonersupply is low, or...

Paper Information 4-1 Section 4: Paper Information Positioning Originals on the Platen Glass Positioning an Original for Manual Copying Using the Reversing Automatic Document Feeder (RADF) Positioning Originals Positioning an SDF Original Positioning Mixed Originals Paper in Main Body Trays Paper in...

4-2 Paper Information Paper Information Positioning Originals on the Platen Glass Positioning an Original for Manual Copying Use the platen glass when originals are not suitable for use with the document feeder,e.g., when size is incompatible, or when originals are folded, stapled, torn, or ingenera...

Paper Information 4-3 Paper Information Using the Reversing Automatic Document Feeder (RADF) Specifications in 1-1, 1-2, 2-2, 2-1 Copying ❒ Original size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 5.5"x8.5"R, A4 (297mm x 432mm~140mm x 216mm) ❒...

4-4 Paper Information Paper Information Using the Reversing Automatic Document Feeder (RADF) (continued) Positioning Originals The document feeder (RADF) automatically feeds up to 100 originals directly to theplaten glass, starting with the top sheet. The RADF should only be used for unstapled,unfol...

Paper Information 4-5 Paper Information Using the Reversing Automatic Document Feeder (RADF) (continued) Positioning an SDF Original In the SDF mode, one thick original can be fed through the RADF original tray. ❒ Original size: 11"x17" to 5.5"x8.5" ❒ Original weight: 13 lb~34 lb (2-...

4-6 Paper Information Paper Information Using the Reversing Automatic Document Feeder (RADF) (continued) Positioning Mixed Originals Mixed size originals can be copied together from the document feeder in either APSmode or AMS mode. In APS mode, copies will be output on mixed paper sizes to matchthe...

Paper Information 4-7 Paper Information Paper in Main Body Trays Standard Paper Size: 11"x17", F4, 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A3, B4, A4, A4R, B5, B5R, A5 (user-adjustable) NOTES: • F4; 8"x13", 203mm x 330mm A3; 11.69"x16.54", 29...

4-8 Paper Information Paper Information Paper in Large Capacity Tray (LT-411) (Option) Standard Paper Size: 11"x17", F4, 8.5"x14", 8.5"x11", 8.5"x11"R, A3, B4, A4, A4R (service-adjustable) Wide Paper Size: 11"x17"W, F4W, 8.5"x14"W, 8.5"x11"W, 8...

Paper Information 4-9 Paper Information Paper in FS-108/108B Finisher (Option) In-Bin Stapler Finisher FS-108/108B accepts LEDGER (11"x17"), LEGAL (8.5"x14") andLETTER/R (8.5"x11"/R) standard/wide paper sizes (5.5"x8.5"R/W in Non-sort, Sort orGroup mode). FS-108/108B ...

4-10 Paper Information Paper Information Paper in FS-108/108B Finisher (Option) (continued) FS-108B Finisher Booklet Tray Folding mode: Standard Paper Size : 11"x17", 8.5"x14", 8.5"x11"R, A3, B4, A4R Wide Paper Size : 11"x17"W, 8.5"x11"WR, A3W, B4W, A4WR Paper...

Paper Information 4-11 Paper Information RADF Main Body Trays Large Capacity Tray Automatic Duplex UnitMulti-Sheet Bypass TrayIn-Bin Stapler Finsher FS-108/108BCover Sheet Feeder PI-108Trimmer Unit TU-108 13 ~ 34 lb13 ~ 110 lb (200g/m 2 thick paper) in 1-1 or 1-2 copying with SDF modeAll Trays: 16 ~...

Copier Management 5-1 Section 5: Copier Management Power Saver Mode Auto Low Power Manual Low Power Auto Shut-Off Manual Shut-Off Entering an ECM Password Weekly Timer Function Timer Interrupt Counter List To Display Counter List To Print Counter List

5-2 Copier Management Copier Management Power Saver Mode There are two modes for the Power saver as described below.Low power mode enables you to conserve energy by maintaining a lower fixingtemperature during periods of copier inactivity.Shut-off mode conserves even more energy by partially turning...

Copier Management 5-3 Copier Management Low Power Setting Screen Basic Screen Power Saver Mode (Continued) Manual Low Power Press [ POWER SAVER ON/OFF ]. The Low Power Setting Screen will be displayed. Touch YES to activate the Low power mode. NOTE: The Manual low power setting can be selected by Ke...

5-4 Copier Management Copier Management Power Saver Mode (continued) Auto Shut-Off This function automatically shuts off the main power after a specified period of copierinactivity.The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240minutes. Initially, Auto shut-off ...

Copier Management 5-5 Copier Management Entering an ECM Password An ECM password is required only when the Electronic Copy Monitor (ECM) feature isactivated; a User Password is assigned; and “Enter E.C.M. password” is displayed onthe touch screen. 1 Enter your 8-digit ECM password, using the keypad....

5-6 Copier Management Copier Management Weekly Timer Function When a copier is under control of the weekly timer function, the TIMER indicator on theright side of the control panel is lit.Important: When the TIMER indicator is lit, the copier will automatically be turned off. Donot turn it off by pr...

5-8 Copier Management Copier Management Counter List This function allows you to view the current indication of the following items as a list onthe touch panel: Total counter, Copier counter, Printer counter, Counter start date.Check the list, then print it from the Counter List Screen, if desired. ...

Basic Operations 6-1 Section 6: Basic Operations How to Make a Basic Copy The Basic Screen Copy Mode Copy Mode Using RADF 1 s 2 Copy Mode Using Platen Glass Copy Density Automatic Exposure Selection (AES) Manual Mode (Lighter, Normal, Darker) Density Shift Lens Mode Automatic Paper Selection (APS) A...

6-2 Basic Operations Basic Operations How to Make a Basic Copy The Basic Screen When power is turned on, the Basic Screen displays after warm-up; when Auto PowerSaver mode is activated; when ECM password is set; when Key counter is used; orwhen Auto/Reset mode is manually or automatically restored. ...

6-4 Basic Operations Basic Operations Copy Mode Copy Mode Specifications: Incompatible functions1-1: Folding/Stapling & Folding with Booklet; Chapter; Booklet1-2: Transparency interleave2-1: Folding/Stapling & Folding with Booklet; Chapter; Booklet; Repeat; AUTO layout; Non-image area erase,...

Basic Operations 6-5 Basic Operations Copy Mode (continued) Copy Mode Using RADF Before selecting the Copy Mode shown on the screen below, read specifications on theprevious page and see Section 4 for information on positioning originals. 1 Touch the desired mode key on the Basic Screen : 1 s s s s ...

6-6 Basic Operations Basic Operations Copy Mode (continued) 1 s 2 Copy Mode Using Platen Glass When copying in 1-2 mode from the platen glass, use the Platen store mode. Refer to p.4-2 for details on positioning originals. 1 Open the document feeder.2 Place original FACE DOWN on the platen glass, th...

Basic Operations 6-7 Basic Operations Basic Screen Light original Normal Dark original Copy Density Automatic Exposure Selection (AES) AES operates with the initial settings. It detects the density of the original image andautomatically selects the appropriate exposure for the copy. Manual Mode (Lig...

6-8 Basic Operations Basic Operations Copy Density (continued) Density Shift Density shift divides each of nine density levels into two levels of lighter and three levelsof darker.Density shift can be used in 4 density modes; Auto (Text/photo), Text, Photo, andIncrease contrast. 1 Touch SPECIAL ORIG...

Basic Operations 6-9 Basic Operations Copy Density (continued) Density Shift (continued) To select the Increase contrast mode, touch Increase Contrast to highlight it, then press [ P (COUNT )]. The following message will be displayed. Density Shift (Increase contrast) 3 (0 ~ 5) 3 Press any key (from...

6-10 Basic Operations Basic Operations Lens Mode Automatic Paper Selection (APS) APS detects the size of originals placed on the RADF or platen glass and automaticallyselects and feeds copy paper of the same size, or selects an appropriate size accordingto the magnification ratio selected.If the app...

Basic Operations 6-11 Basic Operations Lens Mode (continued) Automatic Magnification Selection (AMS) AMS is one of the initial settings that functions when the RADF is used and Copy Size isselected manually. ❒ Incompatible: APS, Change magnification, Book Copy, Overlay, Non-Image Area Erase,Repeat, ...

6-12 Basic Operations Basic Operations Lens Mode (continued) Special Ratio Table ORIGINAL SIZE COPY SIZE 1 . 0 0 0 . 8 3 0 . 7 1 0 . 6 2 0 . 5 5 0 . 5 0 0 . 4 5 0 . 4 2 0 . 3 8 0 . 3 6 0 . 3 3 0 . 3 1 0 . 2 9 1 . 0 0 0 . 8 4 0 . 7 3 0 . 6 5 0 . 5 8 0 . 5 2 0 . 4 8 0 . 4 4 0 . 4 1 0 . 3 8 0 . 3 5 0 ....

Basic Operations 6-13 Basic Operations Lens Mode (continued) Selecting a Special Ratio for Non-Standard Paper To determine reduction or enlargement ratios when using non-standard paper sizes,refer to the Special Ratio Table on the previous page and follow the procedure below. ORIGINAL-COPY WIDTHFIRS...

6-14 Basic Operations Basic Operations Lens Mode (continued) Preset and User Set Ratios Use the Preset and User Set ratios to increase or decrease magnification in fixedamounts. If required, the eight initially set Preset ratios shown below can be adjusted in the KeyOperator mode. In addition, three...

Basic Operations 6-15 Basic Operations Lens Mode (continued) Zoom Mode Use the Zoom mode to reduce or enlarge the copied original image in 1% increments. ❒ Zoom range: 0.33~4.00 0.33~2.00 in 600 dpi mode0.33~4.00 in Resolution (very high) 1 Touch ZOOM on the Basic Screen to display the popup menu fo...

6-16 Basic Operations Basic Operations Lens Mode (continued) Vertical/Horizontal Zoom Use the Vertical/Horizontal zoom mode to reduce or enlarge vertical and horizontaldimensions, independently. ❒ Vertical/Horizontal zoom range: 0.33~4.00 0.33~2.00 in 600 dpi mode0.33~4.00 in Resolution (very high) ...

Basic Operations 6-17 Basic Operations Copy Size The tray selection keys below COPY SIZE are used to select a specific paper tray.When a specific tray is selected, the APS key will go out and the AMS key will behighlighted. The copy size may require a ratio adjustment. When using the RADF withInitia...

6-18 Basic Operations Basic Operations Copy Size (continued) Programming Copy Size for UNIV. Key 1 Touch UNIV . The Universal Tray Size Selection Screen will be displayed. 2 Touch the size key. If the correct size is selected, the Basic Screen will be restored automatically.If an incorrect size is s...

Basic Operations 6-19 Basic Operations Copy Size (continued) Selecting Paper Type/Size for Multi-sheet Bypass Tray 1 Open the Multi-sheet bypass tray, and load the copy paper on the tray. See p. 6-42 ~ p. 6-43 for further details. 2 Touch BYPASS , then touch PAPER TYPE/SIZE . The Paper Type/Size Sel...

6-20 Basic Operations Basic Operations Copy Size (continued) Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued) • When STD size (special) is highlighted, the popup menu will appear. Use arrows to scroll to the desired size. In this case, both the copy size and typeselected will be ind...

Basic Operations 6-21 Basic Operations Copy Size (continued) Selecting Paper Type/Size for Multi-sheet Bypass Tray (continued) • When Wide size paper is highlighted, the popup menu will appear. Use arrows to scroll to the desired wide size. In this case, both the wide size andtype selected will be i...

6-22 Basic Operations Basic Operations Reserve Set Reserve Job The Reserve function allows you to set up a new job while a current (scan/print) job is inprocess. When the current job is finished, the Reserve job starts printing immediately.The FREE JOB key on the screen is touch sensitive and active...

6-24 Basic Operations Basic Operations Basic Screen Reserve (continued) Job Status Screen Touch the STATUS key on the Basic Screen to display the Job Status Screen (see below). The Job Status Screen allows you to perform the following functions.• Confirm machine status• Change order of reserve job• ...

6-26 Basic Operations Basic Operations Reserve (continued) Mishandled Paper During the Reserve Setting If a misfeed occurs with the print/scan job in progress while you are setting a reservejob, the PRINT/SCAN JOB key on the screen will change to JAM key. If originals of the reserve job are already ...

Basic Operations 6-27 Basic Operations Reserve (continued) When Paper is Depleted for the Job in Progress If the paper supply for a print job in progress becomes depleted while you are setting aReserve job, the PRINT JOB key on the screen will change to ADD PAPER key (blinking). In this case, you ca...

6-28 Basic Operations Basic Operations Store Mode Store mode allows you to scan multiple originals by touching the STORE key on the Basic Screen after setting copying conditions, and then outputting the complete set bypressing [ START ]. Platen store mode: scan originals from the platen glass.RADF s...

Basic Operations 6-29 Basic Operations Store Mode (continued) Platen Store Mode (continued) 8 Enter the print quantity, using the keypad. The entered quantity will be displayed on the upper right message area of the Basic Screen.To change the print quantity, press [ C (CLEAR QTY.) ] and re-enter the...

6-30 Basic Operations Basic Operations Store Mode (continued) RADF Store Mode Use this feature to scan more than 100 original into memory from the RADF. Use thisfunction in conjunction with the Reserve function to increase efficiency of the copyingjob. ❒ Incompatible Basic Copying Conditions: None ❒...

Basic Operations 6-31 Basic Operations Rotation 90 ° Rotation This function allows you to utilize APS or AMS and copy the original size documentsdescribed below onto size 8.5"x11" or 5.5"x8.5", irrespective of the copy paper feedingdirection. By default, Rotation requires APS or AMS ...

6-32 Basic Operations Basic Operations Rotation (continued) 90 ° Rotation and AMS For example, when size 8.5"x11" copy paper is loaded in the tray in landscapeorientation and the copier detects that the original is placed in portrait orientation,Rotation (if required) rotates the original im...

Basic Operations 6-33 Basic Operations Rotation (continued) 90 ° Rotation and AMS (continued) When the 5.5"x8.5" tray is selected and the copier detects that the original is placed inportrait orientation, Rotation rotates the original image by 90 ° and the copy is made with the appropriate A...

6-34 Basic Operations Basic Operations Basic Screen Rotation (continued) To Release Automatic Rotation The copier is initially set to activate the Rotation function automatically. To release automatic Rotation: Touch ROTATION OFF on the Basic Screen to highlight it. The Rotation icon will go out and...

Basic Operations 6-35 Basic Operations Check Mode and Proof Copy Use the Check mode to confirm copying selections before pressing the [ START ] key. The Check Screen allows you not only to view the current settings but to change or releasethem directly from the Check mode.In this mode, use Proof cop...

6-36 Basic Operations Basic Operations Check Mode and Proof Copy (continued) 1 Press [ CHECK ] on the control panel to display the Check Screen. 2 Verify the settings made for the current job.3 If necessary, press [ PROOF COPY ] on the control panel or touch PROOF COPY on the Check Screen to output ...

6-38 Basic Operations Basic Operations Interrupt Mode Use the Interrupt mode to interrupt copying in progress to perform a simple job. Wheninterrupt copying is completed, the settings for the initial job restore automatically andthe Basic Screen displays. Press the [ INTERRUPT ] key when the copier ...

6-40 Basic Operations Basic Operations Help Mode Use the [ HELP ] key to access information about the current screen mode and to learn about setting procedures. The [ HELP ] key can be pressed from any screen except Job Memory and Key Operator Screens. The Help Screen also includes the Help menu ico...

6-42 Basic Operations Basic Operations Using the Multi-Sheet Bypass Tray The Multi-sheet bypass tray can be used to stack regular 16 lb~45 lb Bond paper. ❒ Bypass tray paper size: 11"x17"~5.5"x8.5" ❒ Bypass tray paper weight range: 16 lb~45 lb ❒ Bypass tray paper capacity: up to 150 ...

Output Modes 7-1 Section 7: Output Modes FS-108/108B Finisher Specifications Non-Sort Mode Using Primary (Main) Tray Sort Mode Using Primary (Main) Tray Staple-Sort Mode Using Primary (Main) Tray Group Mode Using Primary (Main) Tray Output Modes Using Secondary (Sub) Tray Folding, Stapling & Fol...

7-2 Output Modes Output Modes FS-108/108B Finisher Specifications Use only paper that is recommended by Konica and stored under the environmentalconditions stated for copy quality. Special stock is not guaranteed for reliability or copyquality. Multi-sheet bypass tray, Interrupt, and Transparency in...

Output Modes 7-3 Output Modes FS-108/108B Finisher Specifications (continued) Secondary (Sub) Tray • Non-sort and face down exit• Non-sort and face up exit• Group and face down exit• Group and face up exit ❒ Paper size: 11"x17"~5.5"x8.5" ❒ Paper weight: 16~24 lb ❒ Paper capacity for ...

7-4 Output Modes Output Modes FS-108/108B Finisher Specifications (continued) Trimmer Unit (FS-108B Finisher only) • Trimming Mode ❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4R (8.27"x11.69", 210mmx297mm) ❒ Paper weight: 16~24 lb; Special stock (20 lb paper is recom...

Output Modes 7-5 Output Modes Non-Sort Mode Using Primary (Main) Tray The Non-sort mode simply means that the offset-stacker finisher modes are notselected. Copies will be stacked upon exit without being offset by sorted sets.With the Primary (main) tray initially selected on the Finisher Mode Selec...

Output Modes 7-7 Output Modes Staple-Sort Mode Using Primary (Main) Tray Use this mode when you want to offset and staple each copied set. Stapling position andnumber of staples (1 or 2) can be designated on the Finisher Mode Selection Screen.Each finished set will be offset from the next copied set...

7-8 Output Modes Output Modes Staple-Sort Mode Using Primary (Main) Tray (continued) 1 Touch STAPLE SORT on the Basic Screen to highlight it. The Staple Position icon will be displayed in the OUTPUT icon area. When not changing the staple position,proceed to step 5. Basic Screen Finisher Mode Select...

7-10 Output Modes Output Modes Group Mode Using Primary (Main) Tray Use this mode when you want to group together multiple copies of each original, andoffset the sets upon exit. Grouped sets cannot be stapled. ❒ Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5&...

Output Modes 7-15 Output Modes Folding, Stapling & Folding and Trimming Modes (continued) 1 Close the RADF securely, then press [ AUTO RESET ]. 2 Touch OUTPUT APPLI. on the Basic Screen to display the Finisher Mode Selection Screen. 3 Touch STAPLING & FOLDING or FOLDING , as desired. When se...

7-16 Output Modes Output Modes Basic Screen Finisher Mode Selection Screen Cover Sheet Feeder The Cover Sheet Feeder (PI-108) is available as an option on the FS-108/108B finisher.Load cover sheet paper into this device and use the sheets as front covers for copiedsets output to the Main tray; or us...

7-18 Output Modes Output Modes Manual Stapling The Manual Stapling function is available only with the Cover Sheet Feeder option (PI-108) installed on the FS-108/108B Finisher. To use this convenient function, simply placea set of paper to be stapled into the cover sheet feeder of the finisher, sele...

7-20 Output Modes Output Modes Output Mode for Machine without Finisher This section describes eight output modes for a copier without the Finisher. ❒ Face down non-sort exit (default) ❒ Face down rotation sort exit ❒ Face down group exit ❒ Face down rotation group exit ❒ Face up non-sort exit ❒ Fac...

Output Modes 7-21 Output Modes Output Mode for Machine without Finisher (continued) Face Down Exit • Non-sort mode copies the original set in amounts determined by the print quantity setting, then outputs sorted sets normally. • Rotation sort mode rotates every other sorted sets by 90 ° upon exit, p...

Output Modes 7-23 Output Modes Output Mode for Machine without Finisher (continued) Face Down Exit (continued) To Set Face Down Rotation Group Exit1 Touch OUTPUT APPLI. on the Basic Screen to display the Output Menu Screen. 2 Touch ROTATION GROUP and FACE DOWN to highlight them. 3 Touch OK to comple...

7-24 Output Modes Output Modes Output Mode for Machine without Finisher (continued) Face Up Exit Unless Face Up Exit is selected, all simplex copies and odd numbered duplex copiesexit to the tray face down. When Face Up Exit is selected, all simplex copies and oddnumbered duplex copies exit face up....

7-26 Output Modes Output Modes Output Mode for Machine without Finisher (continued) Face Up Exit (continued) To Set Face Up Rotation Group Exit1 Touch OUTPUT APPLI. to display the Output Menu Screen. 2 Touch ROTATION GROUP and FACE UP to highlight it. 3 Touch OK to complete the setting and return to...

Special Original 8-1 Section 8: Special Original Special Original Screen Resolution (Image Quality) High Mode Very High Mode 600 Dpi Text/Photo Enhance Special Original Mixed Original Z-Folded Original SDF (Single Document Feed) Original Form

Special Original 8-3 Special Original Resolution (Image Quality) Image quality in the normal default mode (400 dpi) is adequate for most copying needs.Special modes are available for jobs that require enhanced image quality, as forcomplex text or graphic images, or high quality photos, etc. High Mod...

8-4 Special Original Special Original Resolution (Image Quality) (continued) Very High Mode Very High mode is used for high quality photo output. ❒ Incompatible Basic Copying Conditions: Using RADF, Sort, Staple-Sort, 1-2, 2-2, RADF StoreMode, Reserve, Proof Copy ❒ Incompatible Special Originals: Mi...

8-8 Special Original Special Original Special Original Mixed Original Use the Mixed original mode with the document feeder or with Store mode to copyledger (11"x17"), legal (8.5"x14"), letter (8.5"x11") and 5.5"x8.5"*, or legal (8.5"x14"),letter/R (8.5"x11...

Special Original 8-9 Special Original Special Original (continued) Mixed Original (continued) 1 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen. 2 Touch Mixed Original . 3 Select additional copying features, as desired.4 Touch OK to complete the setting and to retur...

8-10 Special Original Special Original Special Original (continued) Z-Folded Original Use the Z-folded original mode with the document feeder to copy Z-folded originals soas not to cause paper misfeed. ❒ Use RADF. ❒ RADF capacity: Max. 100 sheets ❒ Incompatible Basic Copying Conditions: Using platen...

Special Original 8-11 Special Original Special Original (continued) SDF (Single Document Feed) Use the SDF mode to copy thick originals to be fed one sheet at a time in the documentfeeder. ❒ Use RADF. ❒ RADF capacity: 1 sheet at a time ❒ Key operator can set the machine to automatically feed the ori...

Applications 9-1 Section 9 : Applications Application Function Menu Sheet/Cover Insertion Chapter Combination Booklet Transparency Interleave Image Insert Book Copy Program Job Non-Image Area Erase Reverse Image Repeat Image Frame/Fold Erasure AUTO Layout All-Image Area Image Shift Stamp/Overlay

9-2 Applications Applications Application Function Menu When APPLI. key on the Basic Screen is touched, the Application Selection Screen displays on the touch panel. If one function on the menu is incompatible with another, itwill appear dimmed. The function always dimmed on the screen is now underd...

Applications 9-3 Applications Sheet/Cover Insertion Use Sheet/Cover Insertion in copy mode or blank mode to insert chapter sheets orseparator sheets into the finished set, as well as front and back covers. Specifications for Sheet/Cover Insertion ❒ Scan and store originals into memory, then print al...

9-8 Applications Applications Chapter Chapter is used with RADF in 1-2 or 2-2 mode for the purpose of locating title pages onthe right side, rather than reverse side, of a duplex copy. To effectively locate the title page on the right, a blank sheet will be automaticallycreated on the reverse side o...

9-10 Applications Applications Combination Use this function to lay out and copy a fixed number (2, 4, or 8) of pages onto one sheetof copy paper (2 in 1, 4 in 1, or 8 in 1). Combination Specifications ❒ Scan and store originals into memory. ❒ Use RADF.Store mode is also available; in this case use ...

9-12 Applications Applications Booklet Use the Booklet to make a multiple page signature booklet on both sides of ledger, legal,or 8.5"x11"R paper from any tray unless it is specified as Thick 2 or TAB of the papertype in the Key operator mode. Original images are scanned into memory andauto...

9-14 Applications Applications Booklet (continued) CAUTION The roller drive unit is located inside the Booklet tray of the finisher. DO NOT put your hand into theroller drive unit when removing folded or stapled & folded sheets; otherwise, you may be injured. Output Menu Screen (2) Touch OK on t...

Applications 9-15 Applications Transparency Interleave Use the Transparency interleave function in 1-1 or 2-1 mode to copy onto overheadprojection transparencies, and output a blank or copied interleaf sheet with each copiedtransparency.In the blank mode, a blank interleaf sheet is output with each ...

9-16 Applications Applications Transparency Interleave (continued) 1 Load copy paper in tray 1, 2, 3, or 4 to match the size of transparencies.2 Open the Multi-sheet bypass tray. Insert one transparency at a time into the Multi- sheet bypass tray, and adjust the paper guides. IMPORTANT: DO NOT LOAD ...

Applications 9-17 Applications Image Insert Use the Image insert mode to combine images scanned from the platen glass, such asphotos, paste-ups, newspaper articles, graphs, etc., with images scanned from thedocument feeder. Then, output the combined images as a finished set.The selected copy paper s...

Applications 9-19 Applications Book Copy Use this function to copy an open book or a ledger sheet onto two 8.5"x11" sheets in 1-1mode, or onto the front and back sides of one 8.5"x11" sheet in 1-2 mode. If you selectanother copy size, image division will perform incorrectly.The follo...

Applications 9-21 Applications Program Job In the ordinary Store mode, the combined features selected for the job are applied to alloriginals to be scanned. In the Program Job mode, you may scan multiple sets oforiginals and apply different settings on each set (referred to as JOB), then output them...

Applications 9-23 Applications Non-Image Area Erase The Non-image area erase mode is used to copy non standard or special originals, suchas books, magazines, paste-ups, graphs, thin or thick materials, etc. from the platenglass. The exposed glass area outside the borders of the original will not be ...

Applications 9-25 Applications Reverse Image Use Reverse image to reverse the image from black-on-white to white-on-black, andvice versa. ❒ Original/Copy paper: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5" ❒ Incompatible Basic Copying Conditions: Folding,...

9-26 Applications Applications Repeat Image Use Repeat image to create labels, business cards, tickets, etc., by repeating theselected image down the page. Vertical/Horizontal Width Setting modeRepeat the selected image area of 10mm ~ 150mm in both vertical and horizontal widthsmeasured from the rea...

Applications 9-27 Applications Repeat Image (continued) ❒ Incompatible Conditions with Repeat ModeBasic copying conditions: Rotation, APS, AMS, Change magnification, Group, Rotation Sort,Rotation GroupSpecial Originals: Resolution (Very high), Mixed Original, Z-folded OriginalApplications: Sheet/Cov...

Applications 9-31 Applications AUTO Layout Use this function to detect the image area of the original and center the whole image onthe copy paper. ❒ Copy mode is automatically set to 1-1; 1-2 mode is also available only when using Storemode. ❒ APS and AMS are automatically released. Changing Magnifi...

Applications 9-33 Applications All-Image Area Use this function to make copies printed completely to the edges. ❒ Copies will be made without image cutoff on the edges. ❒ Incompatible Basic Copying Conditions: Rotation Sort ❒ Incompatible Special Originals: None ❒ Incompatible Applications: Non-Imag...

9-34 Applications Applications Image Shift Use Image Shift to create a new binding margin on originals copied in the 1-1 or 2-2mode, or adjust existing margins on originals copied in the 1-2 or 2-1 mode. If imageloss is likely, select the Reduce & Shift mode instead of regular Image shift.Page s...

9-38 Applications Applications Stamp/Overlay Stamp allows you to print regular stamp, numbering, page numbering, date and time,watermark, and watermark numbering onto the output copies. These 6 types of stampscan be used individually or in multiple combinations. • STAMP prints the letters selected f...

Applications 9-39 Applications Stamp/Overlay (continued) Overlay Specifications ❒ Scan and store originals into memory. ❒ APS and AMS are automatically released. ❒ Magnification is initially set to 1:1. This setting is changeable. ❒ Original/Copy size: 11"x17", 8.5"x14", 8.5"x11&...

Applications 9-41 Applications Stamp/Overlay (continued) 4 When selecting STAMP, SET NUMBERING, PAGE NUMBERING, or DATE/TIME, select the desired position from 9 location keys on each screen.If fine adjustment is required, touch FINE ADJ. OF POSITION to display the Fine Adjustment Setting Screen.Touc...

Job Memory 10-1 Section 10: Job Memory Job Store Job Recall Job Memory Form

10-2 Job Memory Job Memory Job Store Use Job Store to store up to 30 frequently-used copying jobs, which can be recalled atany time. The stored jobs can be given alphabetical names. ❒ All copying functions can be selected Job No. Selection Screen Job Store Check Screen Job Name Registration Screen C...

Job Memory 10-3 Job Memory Job Store (continued) 1 Make job selections from the Basic Screen, Application Selection Screen, Special Original Screen and/or Output Selection Screen. 2 When all selections are made, press [ JOB MEMORY ] on the Control panel to display the Job No. Selection Screen. 3 Tou...

10-4 Job Memory Job Memory Job Recall Use Job Recall to recall jobs that are already stored in Job Memory. Job Recall Check Screen Job No. Selection Screen Job No. Selection Screen (Job Recall)

10-6 Job Memory Job Memory Job Memory Form Make a copy of this form to record frequently-used copy jobs stored in Job Memory.Update the information when changes are made. Make additional copies, as needed. JOB NUMBER/NAME JOB DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Server Function 11-1 Section 11: Server Function Server Function Image Store/Delete Mode To Store Image Data in HDD To Delete Image Data Image Store & Output Mode Image Recall Mode

Server Function 11-3 Server Function Server Function (continued) The Server function provides the following three modes: q Image Store/Delete modeStore the image data scanned from originals in HDD, or delete the data stored inHDD. w Image Store & Output mode Store the scanned image data in HDD a...

11-4 Server Function Server Function Image Store/Delete Mode When the original image is stored into DIMM, use this function to store the image datainto the HDD. Or, in the event data is already stored in the HDD, use this function todelete it from the HDD. NOTE: Installation of the optional HDD (HD-...

Server Function 11-5 Server Function Image Store/Delete Mode (continued) To Store Image Data in HDD (continued) Image Data Password Entry Screen Job Name Entry Screen Image Data Store/Delete Site Selection Screen 1 Press [ MODE ] to light up the [ SCANNER/SERVER ] LED. The Scanner/Server Setting Men...

11-6 Server Function Server Function Image Data Store/Delete Site Selection Screen Scanner/Server Setting Menu Screen Image Store/Delete Mode (continued) To Store Image Data in HDD (continued) 9 Press [ START ] to scan original(s). When scanning is completed, the Image Data Storing Screen will be di...

11-8 Server Function Server Function Image Store & Output Mode Use this function to store the scanned image data in HDD after copying is completed.This storing function does not conflict with any other copying conditions. NOTE: Installation of the optional HDD (HD-102) is required for this funct...

Server Function 11-9 Server Function Image Store & Output Mode (continued) 8 Press [ START ] to scan and then print. When the Store mode is used, touch STORE on the Basic Screen to deselect the Store mode when the store function is completed, i.e., after all originals are scanned, thenpress [ ST...

11-10 Server Function Server Function Image Recall Mode Use this function to recall the image data stored in HDD to built-in DIMM for printing. NOTE: Installation of the optional HDD (HD-102) is required to recall data from the HDD. To recall data stored in the HDD, enter the password specified at t...

Server Function 11-11 Server Function Image Recall Mode (continued) 1 Press [ MODE ] to light up the [ SCANNER/SERVER ] LED. The Scanner/Server Setting Menu Screen will be displayed. 2 Touch IMAGE RECALL to display the Image Data Recall Site Selection Screen. 3 Touch HDD to recall the data stored in...

12-2 Shortcuts Shortcuts Set Reserve Job (p. 6-22) 1 Touch FREE JOB to display the Reserve job setting screen while a current job is in progress. 2 Select copying conditions for the reserve job. Wait for the current job to complete its scanning operation, if necessary. 3 Position the Reserve job ori...

12-10 Shortcuts Shortcuts Loading Paper (p. 14-2) Main Body User-Adjustable Trays: Tray 1 (500), Tray 2 (500), and Tray 3 (1,000) 1 Withdraw the main body tray, then place paper into the tray with the curl turning up. Load size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R o...

Key Operator Mode 13-1 Section 13 : Key Operator Mode To the Key Operator How to Access the Key Operator Mode Function Menu Map System Initial Setting [1] Date & Time Setting [1] Language Select Setting [2] IP Address Setting [3] Copier Initial Setting [2] User Setting Mode [3] User Density Leve...

13-2 Key Operator Mode Key Operator Mode To the Key Operator The key operator is trained to handle all special key operator functions that are notaccessible to the general user, such as monitoring overall copier activity, machineperformance, and service information; modifying machine settings; and c...

Key Operator Mode 13-3 Key Operator Mode To the Key Operator (continued) How to Access the Key Operator Mode 1 Press the [ HELP ] button on the Control panel to display the Help Screen. 2 Then, touch the Key Operator Mode on the Help Screen. The Key Operator Password Entry Screen displays when the 4...

13-4 Key Operator Mode Key Operator Mode Function Menu Map FUNCTION MENU SUB FUNCTION MENU AND SETTING OPTIONS [1] System initial setting [1] Date&Time setting: [Present time; Setting time; Summer time][2] Language select setting: [Japanese; English][3] IP address setting: [IP address; Subnetmas...

Key Operator Mode 13-7 Key Operator Mode System Initial Setting [1] Set the following initial conditions of the copier. • Date & Time setting: Current date and time, summer time• Language select setting: Language used in LCD (English)• IP address setting: IP address to be accessed from PC Date &...

13-8 Key Operator Mode Key Operator Mode System Initial Setting [1] (continued) Language Select Setting [2] Select the language used in the LCD (English). ❒ Default setting: English System Initial Setting Menu Screen Language Selection Screen 1 Press [ HELP ] to display the Help Screen, then touch K...

13-10 Key Operator Mode Key Operator Mode Copier Initial Setting [2] Initial settings are the settings that display automatically when the copier is powered on,when Auto/Reset timer is operated, or when [ AUTO RESET ] key is pressed. These settings can be changed by the key operator, as shown in thi...

13-14 Key Operator Mode Key Operator Mode User Setting Mode [3] (continued) User Lens Mode Ratio Setting [3] The preset and userset ratios available on the Basic Screen are used to reduce andenlarge the original image to accommodate copy paper size.Normally, users are allowed to change the three USE...

Key Operator Mode 13-15 Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] This function can only be accessed by the key operator after a 8-digit ECM master keycode is entered. The Electronic Copy Monitor allows you to monitor all copying activityby controlling ECM password account...

13-20 Key Operator Mode Key Operator Mode ECM (Electronic Copy Monitor) Function Setting [4] (continued) E.C.M. Data Edit [1] (continued) 5 If other ECM setting changes are required, touch PREVIOUS SCREEN on the ECM Data Edit Screen to return to the ECM Setting Menu Screen. Touch desired key, from[1...

Key Operator Mode 13-23 Key Operator Mode Lock/Delete Job Memory [5] Use this function to lock/unlock or delete a Job that has been programmed.A locked Job is indicated by a lock icon ( ) on the Lock/Delete Job Memory Screen. The settings of a locked job cannot be changed. ❒ Setting options: Lock Jo...

Key Operator Mode 13-27 Key Operator Mode Key Operator Data Setting [8] Use this screen to enter the name and extension number of the key operator indicatedon the Help Screen developed from the Basic Screen. ❒ Setting options: 5-digit key operator telephone extension; Max. 8-character key operator n...

13-28 Key Operator Mode Key Operator Mode Weekly Timer [9] This function can be accessed only by the key operator after a unique 4-digit Weeklytimer master key code is entered. The Weekly Timer is a copier management function that shuts down power to themachine on a daily or hourly basis, and can be...

Key Operator Mode 13-29 Key Operator Mode Weekly Timer [9] (continued) How to Access the Weekly Timer Setting Mode Key Operator Mode Screen Weekly Timer Master Key Code Screen Weekly Timer Setting Menu Screen 1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode . Enter a 4-digit...

13-32 Key Operator Mode Key Operator Mode Weekly Timer [9] (continued) Timer Setting [2] (continued) 5 To set the ON/OFF time collectively for more than one day of the week, touch Collectively timer setting to display the Weekly Timer On/Off Time Collective Setting Screen. 6 When you open this scree...

Key Operator Mode 13-33 Key Operator Mode Weekly Timer [9] (continued) Timer Action On/Off Setting [3] Use this function to set the On/Off condition of the copier for a given month. Set the On-Off condition for specific days; or collectively, for all Mondays through Sundays of thegiven month. The de...

13-40 Key Operator Mode Key Operator Mode Memory Switch Setting [13] This function allows you to change the Memory Settings listed below. See pp. 13-41~13-45 for details on Memory Settings. SW No. Item Setting (default is underlined) No. 01: Auto reset timer OFF/ 30 sec./ 60 sec./ 90 sec./ 120 sec./...

13-50 Key Operator Mode Key Operator Mode HDD Management Setting [18] Use this function to manage the image data stored in the optional HDD (HD-102) and tocheck the space available for new data. • Password list/delete: Display the password list on the screen, or delete the image data (JOB) by deleti...

14-2 Maintenance & Supplies Maintenance & Supplies Loading Paper Paper Indicator ( ) The Paper indicator always lights on the tray key of the Basic Screen to indicate thepaper level. Paper Empty Indicator ( or ) The Paper empty indicator flashes on the tray key of the Basic Screen when a tra...

14-4 Maintenance & Supplies Maintenance & Supplies Loading Paper (continued) Loading Paper in Tray 4 (LT-401/LT-411) When displaying Thick 1 or Thick 2 on the tray key of the Basic Screen, be sure to loadthe specified paper; otherwise mishandled paper may occur.When displaying TAB on the tra...

Maintenance & Supplies 14-7 Maintenance & Supplies Adding Toner CAUTION Keep toner cartridge away from children. Although the toner is non-toxic, do not inhale it or allow it toenter your eyes. In case the toner comes in contact with eyes, please consult your physician. When toner supply is ...

14-8 Maintenance & Supplies Maintenance & Supplies Inserting a New Staple Cartridge into FS-108/108B Finisher Use only the staples supplied by Konica. Contact your Konica representative to reorder. 1 Open the Finisher door.2 Pull out the stacker unit by holding the stacker unit handle.3 Pull...

Maintenance & Supplies 14-9 Maintenance & Supplies Empty Trash Basket of TU-108 Trimmer Unit When the trash basket becomes full, “Trash basket of Trimmer is full / Please emptytrash basket” message displays on the touch screen. 1 Open the trimmer front door. Withdraw the trash basket.2 Empty...

14-10 Maintenance & Supplies Maintenance & Supplies Preventive Maintenance After a set number of copies have been made on your copier, Preventive Maintenance(PM) will be required for maintaining optimal performance. When preventive maintenance is due, a message will prompt you to contact you...

Maintenance & Supplies 14-11 Maintenance & Supplies Cleaning the Left Partition Glass The glass partition at the far left of the platen glass is designed for real-time scanningfrom the RADF. Keep this glass clean; otherwise soil marks may be copied, resulting indark lines on the copies. Clea...

Troubleshooting 15-1 Section 15: Troubleshooting Call for Service Limited Use of the Copier in Trouble Memory Overflow Power OFF/ON Screen Clearing Mishandled Paper Copying Hints

15-2 Troubleshooting Troubleshooting Call for Service CAUTION A Call for Service message indicates a machine condition that requires the attention ofyour Konica service representative. 1 Immediately make note of the Report code No. indicated in the upper portion of the screen. 2 Turn OFF the main po...

Troubleshooting 15-3 Troubleshooting Call for Service (continued) Limited Use of the Copier in Trouble If the message shown below is displayed on the Call for Service Screen, you maycontinue operating the copier on a limited function basis and utilize the trays and ADUthat are not affected by the tr...

15-6 Troubleshooting Troubleshooting Clearing Mishandled Paper CAUTION When removing mishandled paper, be sure to leave no torn paper inside the machine,avoid touching the drum or scratching it in any way, and keep all metal and magneticobjects, e.g., watches, jewelry, etc. away from the drum area. ...

15-8 Troubleshooting Troubleshooting Copying Hints COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON Fully insert paper trays.Close RADF.Check to be sure power plug is firmly inserted in electrical socket. COPY IMAGE IS TOO LIGHT Manually adjust copy density to darker density.Check toner indicator and...

Troubleshooting 15-9 Troubleshooting Copying Hints (continued) COPYING DOES NOT BEGIN AFTER PRESSING START Insert or adjust the appropriate paper tray for copy size selected.Close document cover firmly.Close front door completely.Check to see if the message “Please close stacker cover of Trimmer” is...

15-10 Troubleshooting Troubleshooting Copying Hints (continued) CALL FOR PM IS DISPLAYED IN MESSAGE AREA Contact your service representative for Preventive Maintenance. APS SELECTS THE WRONG PAPER SIZE Paper guides must be adjusted exactly to the size of originals. IN MIXED ORIGINAL MODE, A MESSAGE ...

Machine Specifications 16-1 Section 16: Machine Specifications Specifications

Machine Specifications 16-3 Specifications Specifications Subject To Change Without Notice Magnification Presets; 0.50, 0.65, 0.77, 0.93, 1.21, 1.29, 1.55, 2.003 User Sets - 0.33~4.00, set by key operatorZoom range - 0.33~4.00 in 1% steps 0.33~2.00 in 600 dpi mode Originals on Platen Max. size: 11&#...

2 Index Index NUMBER 180 ° Rotation 6-33 2 in 1 key 9-102 Repeat 9-274 in 1 key 9-104 Repeat 9-27600 Dpi 8-58 in 1 key 9-108 Repeat 9-2790 ° Rotation 6-31 A ADD PAPER key 6-27ADD TONER message 3-13ADJUSTMENT MODE message 6-3AES key 6-7All-Image Area 9-33AMS key 6-17APPLI. key 9-2APS key 6-17AUTO Lay...

Konica Business Technologies, Inc. 500 Day Hill Road Windsor, CT 06095 Telephone; (860) 683-2222 July 2000 Printed in Japan OP-7075-04