Konica Minolta 360 - Manuals

Page 2 - Table of Contents

bizhub 500 / 420 / 360 Copy Job Shops Table of Contents Finding the Copier IP Address on the bizhub 500/420/360 . . . . . . . . . . . . . . . . . . . . . . 1 Create an 8.5" x 14" Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Creat...

Page 3 - Stapled on left hand corner

1 bizhub 500 / 420 / 360 Copy Job Shops Finding the Copier IP Address on the bizhub 500/420/360 It will be necessary to have access to the copier IP address when either configuring the 500/420/360 onto a network or setting up a “one touch”. 1. Press Utility/Counter on control panel. 2. Administrator...

Page 4 - Copy

2 Book Copy Mode Choose book/booklet smaller than 8.5" x 11" which will illustrate the “erase non-image” functionality. Copy the front & rear covers and six book pages in the 1:2 duplex mode with 2 position staple. Important: The RADF must be positioned off the platen glass, in the extre...

Page 8 - Combine Originals

6 Program (above job) Combine Originals into Memory Mode Repeat the above job (step by step) of copying both sides of an ID badge onto an 8.5" x 11" and put job parameters into memory mode for future use. Please see previous Memory Mode job for step by step procedures. Booklets, 11" x 17...

Page 9 - Activating Account Track

7 Activating Account Track (at the MFP) 1. Touch the Utility/Counter hard key 2. Touch Administrator Setting 3. Enter the MFP administrator password (factory default is 1, 2, 3, 4, 5, 6, 7, 8) 4. Touch OK 5. Touch User Authentication/Account Track 6. Touch Authentication Method (field #1) Note: The ...

Page 10 - To Access the MFP; Built-in Stamp and Set Numbering Stamp Size

8 To Access the MFP 1. Touch Input 2. Enter the password (“ x ”) 3. Touch OK 4. Touch the Access hard key Built-in Stamp and Set Numbering Stamp Size APPLICATION: The stamp size of built-in stamps and Set Numbering can now be change. This enhances the versatility of the existing functionality of bui...

Page 11 - Creating a User Box

9 Creating a User Box In the above noted exercise User Boxes are created at the MFP control panel; without utilizing PageScope “Web Connection.” An optional HDD must be installed in the MFP in order to complete this exercise. APPLICATION: To be able to set up a user box at the MFP; scan a document t...

Page 13 - Configure the “Envelope Application” in the By-Pass; Quick Copy User Interface

11 Configure the “Envelope Application” in the By-Pass APPLICATION: In order to feed envelops from the by-pass; the paper feed must be configured. Once the by-pass is configured to accept envelops; the envelops are placed in the by-pass flap up and short end inserted into by-pass. A maximum of no mo...

Page 14 - Notes