Konica Minolta 300 - Manuals

3 Foreword Contents Safety Symbols Safety Precautions .............................................................1 Foreword ............................................................................4 Safety Notes .......................................................................... 4 Packag...

4 Foreword Foreword Safety Notes CAUTION: Federal law restricts this device to sale by or on the order of a physician.The instrument is designed for measurement of the oxygen saturation (SpO 2 ) of arterial blood and the pulse rate. Do not use it for any other purposes, such as warning warning of sl...

5 Foreword Package Contents Before using the instrument, make sure that the following items are present.1) PULSOX-300 main body × 1 2) Wristband WB-300 × 1 3) AAA-size alkaline battery × 1 4) Instruction manuals • PULSOX-300 instruction manual × 1 • Separate manual (Using manual for Probes) × 1 ✻ Th...

6 Foreword System Diagrams and Accessories The instrument consists of the following items. ���������� Optional accessories Standard accessories Wristband WB-300 AAA-size alkaline battery Finger Clip Probe SR-5C Spot Check Probe SP-5C Monitor Probe LM-5C Personal Probe SD-5C Extension cable EC-300 St...

7 Foreword Names of Parts PULSOX-300 Power button Probe connector Wristband Battery cover Used to start/end measurement. Measurement results and messages are displayed. Connect the probe to this connector. Used to set the instrument on your wrist. The cover can be opened by turning it approximately ...

8 Foreword Notes on Use • This instrument should be used under the following operat- ing conditions. • Temperature of 0 to 40°C (32 to 104°F), relative humidity of 30 to 85%, with no condensation. • Atmospheric pressure of 700 to 1060 hPa (altitude of – 400 to 3000m). • This is a precision instrumen...

10 Foreword Notes on Storage • This instrument should be stored under the following storage conditions. • Temperature of –10 to 60°C (14 to 140°F), relative humid- ity of 10 to 95%, with no condensation. • Atmospheric pressure of 700 to 1060 hPa (altitude of –400 to 3000m). • When storing the instru...

11 Foreword Disposal Method • When disposing of the used battery, insulate the polarity ter- minals with insulating tape etc. If the terminals of the battery come into contact with metal objects, heat generation, explo- sion or fi re may result. • Make sure that the battery is either disposed of or r...

12 Pre pa ra tio ns Preparations Before starting measurements using this instrument, follow the procedure given below to ensure that measurements are stable. 1) Attaching the Wrist Band Attach the Wrist Band WB-300 (supplied as a standard accessory) to the instrument. Since the WB-300 is made of ela...

13 Pre pa ra tio ns 4 Pass the other end of the band outward through band fi xture B. ◆ Take care not to twist the band. the band. 2) Connecting the probe Connect the probeʼs connector plug into the Probe Connector on the instrument. ◆ M a k e s u r e t h a t p r o b e ʼ s c o n n e c t o r p l u g i...

14 Pre pa ra tio ns 3) Installing the battery Procedure 1 Turn the battery cover clockwise approximately 90 degrees to open the cover. ◆ W h e n t u r n i n g t h e c o v e r, k e e p t h e f l a t part of your finger on the coverʼs catch. This facilitates opening the c o v e r w i t h m i n i m u m...

15 Me asu rem en t Measurement 1) Starting the Measurement 1 A t t a c h t h e p r o b e t o a fi nger of an adult patient. 2 Press the Power button. ● The Power is ON, all the elements on the display are displayed for about 2 seconds, and then the display changes to the measurement display. ◆ Until ...

16 Me asu rem en t 2) Reading the display When the instrument is turned ON, all the elements of the LED will light up. The pulse level, pulse rate and SpO The pulse level, pulse rate and SpO 22 value are displayed value are displayed during measurement. Pulse rate (P.R.) If an error occurs, an error...

17 Me asu rem en t 3) Ending the Measurement About Auto Power-Off function The instrument has an auto power-off function that operates independently. If no probe is connected to the PULSOX ("C" blinks) or no probe is attached to the patient ("L" blinks) continuously for more than 2 m...

18 Ch eck Po ints Trouble Shootings Error Messages The instrument display error messages when the error occurs. Check and correspond to them correctly. �������������� ����� �������� �� � � � � � � � � � � � � � � � � � � � � � � � � � ���������������������������������� � � � � � � � � � � � � � � � ...

22 Ch eck Po ints Maintenance and Inspection • Before using the instrument, make sure that there is no dam- age to the instrument, no damage or wire-breakage in the probe cable and the instrument operates correctly and safely. Cleaning • Dampen a soft cloth with neutral detergent or water, wipe the ...

23 Appendix Specifi cation ■ Dual-wavelength pulse type (665nm/880nm) arterial blood oxygen satura- tion measuring instrument • Name: Oxygen Saturation Monitor • Model name: PULSOX-300 ■ Functions: • Measuring range: SpO 2 : 0 to 100% SpO 2 Pulse rate: 30 to 230 bpm • Accuracy: SpO 2 : ±2% SpO 2 (70 ...

25 Appendix Appendix Calculation Method for Displayed Values <Pulse level meter> The pulse level meter displays the transmitted light amount ratio calculated by the following equation. The pulse level is indicated in eight levels (0 to 15%, full scale if over 10%). <Oxygen saturation (SpO 2...

26 Appendix EMC Guidance Guidance and manufactureʼs declaration - electromagnetic emissions Guidance and manufactureʼs declaration - electromagnetic immunity The Oxygen Saturation Monitor Model PULSOX-300 is intended for use in the electromagnetic  environment specified below. The customer or the use...

28 Appendix ■ Spectral Absorption of Hb and HbO 2 Absorption coef ficient Wavelength Red light Infrared light Measurement Principle This instrument measures the oxygen saturation (SpO 2 ) in arte- rial blood and pulse rate continuously in a non-invasive method by applying optical principles. by appl...

29 Appendix Relation between Oxygen Saturation and Partial Pressure The relation between oxygen saturation (SpO 2 ) and oxygen partial pressure (PaO 2 ) is shown in the graph below. SpO 2 is the oxygen saturation as measured by pulse oximeters. oxygen saturation as measured by pulse oximeters. ■ Oxy...