Page 2 - EA; ROUGHING-IN INFORMATION
2 Kohler Co., Kohler, WI 113319-2- EA (-) ROUGHING-IN INFORMATION Fig. #1 K-16140 K-16141 K-16142 K-16143 K-16146 K-16147K-16148K-16150 K-16149 4-7/8” 3-1/4” 5-7/16” 5-7/16” 3-1/4” 3-13/16” 5-1/6” K-16147: 30”K-16148:18”K-16150: 24” 3-1/4” 3-1/4” 24-3/8” 8-1/8” 3-1/4” 4-3/4” 5-5/8” 3-1/4” 4-3/4” 25-...
Page 3 - TOWEL SHELF AND GRAB BAR INSTALLATION; A. MARK CENTER POINT LOCATIONS
3 Kohler Co., Kohler, WI 113319-2- EA (-) TOWEL SHELF AND GRAB BAR INSTALLATION A. K-16155 TOWEL SHELF 1. Loosen the setscrew at the bottom of each shelf support.Then remove the brackets from inside the shelfsupports.NOTE: Use care to avoid scratching the productfinish. 2. Secure the three shelf sec...
Page 5 - WALL PLATE INSTALLATION; A. INSERT WALL ANCHORS
5 Kohler Co., Kohler, WI 113319-2- EA (-) WALL PLATE INSTALLATION A. INSERT WALL ANCHORS 1. Press and hold the legs of a wall anchor (provided)together, and insert the wall anchor legs into the hole.Insert all wall anchors into the pre-drilled mounting holes. 2. With a hammer, carefully tap each wal...
Page 6 - C. SECURE WALL PLATE TO ANCHORS
6 Kohler Co., Kohler, WI 113319-2- EA (-) 5. If the wall anchors are inserted into a hole in a wall stud,the legs will remain together and provide proper support. Fig. #10 C. SECURE WALL PLATE TO ANCHORS 1. Orient a wall plate with the large mounting hole down asshown. 2. Secure with supplied panhea...
Page 7 - SINGLE POST ACCESSORY INSTALLATION
7 Kohler Co., Kohler, WI 113319-2- EA (-) SINGLE POST ACCESSORY INSTALLATION A. K-16141 TOILET TISSUE HOLDER 1. Start setscrew into hole in tissue holder assembly asillustrated. 2. Align tissue holder assembly over wall plate. 3. Tighten setscrew. 4. Insert tissue holder spindle into tissue holder a...
Page 10 - MULTIPLE-POST ACCESSORY INSTALLATION
10 Kohler Co., Kohler, WI 113319-2- EA (-) MULTIPLE-POST ACCESSORY INSTALLATION A. K-16147, K-16148 TOWEL BARS 1. Place towel bar through one post and secure with aknob. 2. Place a ferrule, small end first, over open end of towelbar. 3. Place sleeve over open end of towel bar. 4. Place a ferrule, la...