Page 4 - Control Symbols; Standard burners
4 1. Removable pan supports 2. Semi-rapid burner 3. Semi-rapid burner 4. Rapid burner 5. Auxiliary burner 6. Professional wok burner 7. Semi-rapid burner control knob 8. Semi-rapid burner control knob 9. Professional wok burner control knob 10. Rapid burner control knob 11. Auxiliary burner control ...
Page 5 - You should never use:; Convectors such as metal netting, or others.; Burner; wok; Practical advice on using the hob
5 Read the instructions to get the best out of yourhob.- Use pans with a similar diameter to the burner(see the table on this page) - Use flat bottomed pans except with the woksupport. - Do not use excessive water when cookingfoods and use the lid. - Ensure that pans are fully supported by the pansu...
Page 6 - If the distance “A” between the; Injectors table
6 771 +1 0 4 9 0 + 1 0 750 +1 0 5 1 1 + 1 0 R 1 2 1 .5 If a hood is to be installed above the hob, refer to the hood installation instructions to ensure the correctheight above the hob Note: If the distance “A” between the wall cupboards in the kitchen isbetween 600mm and 730mm, theheight “B” must b...
Page 7 - Warnings and suggestions
7 To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation. • These instructions are only valid in the countries whose destination symbol is shown on the serialnumber plate on the hob. • The packing (plastic bags, expanded polyurethane, etc) pose a ...
Page 8 - Packing; dispose of all packing responsibly and carefully.; Product; on the product, or on; Safeguarding the environment
8 Packing The packing material is 100% recyclable and islabelled with the recycling symbol . Please dispose of all packing responsibly and carefully. Product This appliance is marked according to theEuropean Directive 2012/19/EU, Waste Electricaland Electronic Equipment (WEEE).By ensuring that this ...
Page 9 - Technical information for the installer; Installation
9 Technical information for the installer • This appliance can be built into a 30mm to 70mm thick worktop. • If no oven is to be installed below the hob, a panel must be fitted under the hob to preventhob damage and protect the cupboard contents.This panel must cover the whole of theunderside of the...
Page 10 - • Information on the voltage and power absorbed are shown on the; The appliance must be earthed.; Electrical connection; Before inserting the hob, arrange the sealing strip; Sealing strip
10 The electrical connections must comply with current legislation and be carried out by a qualified, competent person. • Information on the voltage and power absorbed are shown on the serial no. plate. • The appliance must be earthed. • When installing the appliance, we recommend that this hob is p...
Page 16 - Printed in Italy
Whirlpool EMEA S.p.A. Via Carlo Pisacane n.1,20016 Pero (MI), Italy www.whirlpool.eu Printed in Italy r 10/16 400010902550