Page 2 - Table of Contents
2 Table of Contents FOOD PROCESSOR SAFETY Important Safeguards................................................................................................. 3 Electrical Requirements-Plastic Models ..................................................................... 4 Electrical Requirements-Met...
Page 3 - ENGLISH; IMPORTANT SAFEGUARDS; FOOD PROCESSOR SAFETY
3 ENGLISH IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Food Processor in water or other liquid. 3. Close supervision is necessar...
Page 4 - Electrical Requirements- Plastic Models
4 FOOD PROCESSOR SAFETY Electrical Requirements- Plastic Models Volts: 220-240 Volts VACHertz: 50/60 Hz NOTE: This Food Processor is equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will À t in a polarized outlet only one way. If t...
Page 5 - Electrical Requirements- Metal Models
5 ENGLISH FOOD PROCESSOR SAFETY Volts: 220-240 Volts VACHertz: 50/60 Hz NOTE: This Food Processor has a grounded plug. To reduce the risk of electrical shock, this plug will À t in an outlet only one way. If the plug does not À t in the outlet, contact a quali À ed electrician. Do not modify the plu...
Page 6 - Electrical Requirements for Brazil Only
6 Electrical Requirements for Brazil Only Residence mains: The mains wires must be of copper with a minimum cross-section per ABNT (NBR-5410).To protect this appliance and the mains against over loading, this appliance must be connected to a circuit that is protected with a thermo-magnetic circuit b...
Page 7 - PARTS AND FEATURES
7 ENGLISH PARTS AND FEATURES Heavy-Duty Base 3.0 L (13-Cup) Work Bowl Reversible (2 mm and 4 mm) Shredding Disc Julienne Disc (select models only) Stainless Steel Multipurpose Blade Work Bowl Cover with 3-in-1 Feed Tube 3-Piece Food Pusher 945 ml (4-Cup) Mini-Bowl and Mini-Blade Drive Adapter Dough ...
Page 8 - ACCESSORIES; Included Accessories
8 PARTS AND FEATURES Externally Adjustable Slicing Control KitchenAid’s exclusive externally adjustable slicing disc allows you to adjust slicing thickness from thin to thick, without having to remove the blade assembly. With the slicing disc installed, simply slide the Slicing Thickness Control to ...
Page 9 - Disc Assembly Overview
9 ENGLISH ACCESSORIES Disc Assembly Overview There are two different disc adapters included with the food processor. One is used exclusively with the adjustable slicing disc. The other is used with all other discs. Reversible Shredding Disc Adjustable Slicing Disc Drive Adapter Disc Adapter Slicing ...
Page 10 - Accessories Selection Guide; Action Setting Food
10 Cheese Multipurpose Stainless Steel Blade Chocolate Fruit Fresh herbs Nuts Tofu Vegetables Mini-bowl and Mini Multipurpose Stainless Steel Blade Pasta Sauce Pesto Salsa Sauces Fruit (soft) Adjustable Slicing Disc Potatoes Tomatoes Vegetables (soft) Cheese Chocolate Fruit (hard) Vegetables (hard) ...
Page 11 - Removing the Work Bowl; Before First Use; PREPARING THE FOOD PROCESSOR FOR FIRST USE; Storing Parts
11 ENGLISH Before using your Food Processor for the À rst time, wash the work bowl, work bowl cover, mini-bowl, feed tube pushers, discs, and blades either by hand or in the dishwasher (see “Cleaning the Food Processor”). Removing the Work Bowl Cover from the Work Bowl Your Food Processor is shipped...
Page 12 - SETTING UP YOUR FOOD PROCESSOR
12 Attaching the Work Bowl 3. Grasp the work bowl handle and turn the bowl counterclockwise to lock it on the base. Select the accessory you would like to use and install it according to the instructions on the following pages. Attaching the Work Bowl Cover NOTE: Be sure to install the desired acces...
Page 13 - Installing the Adjustable
13 ENGLISH SETTING UP YOUR FOOD PROCESSOR Installing the Adjustable Slicing Disc 1. With the work bowl installed, place the drive adapter on the power shaft of the base. TIP: You may need to turn the disc/drive adapter until it drops down into place. 3. Lower the slicing blade and slicing adapter on...
Page 15 - Installing the Mini-Bowl and
15 ENGLISH SETTING UP YOUR FOOD PROCESSOR Installing the Mini-Bowl and Mini-Blade 1. Place the mini-bowl inside the work bowl over the power shaft. Rotate the mini- bowl until the tabs on the top edge of the bowl drops into the indents on the top of the work bowl. 2. Insert the drive adapter into th...
Page 16 - Installing the Chef ’s Bowl
16 Installing the Chef ’s Bowl The Chef ’s Bowl can only be used with the slicing or shredding discs. It cannot be used with the multipurpose blade. 1. Place the Chef ’s Bowl inside the work bowl, sliding it down over the power shaft. Rotate the Chef ’s Bowl until it drops into place. Once in place,...
Page 17 - USING YOUR FOOD PROCESSOR; Using the Speed 1/Speed 2
17 ENGLISH USING YOUR FOOD PROCESSOR Using the Speed 1/Speed 2 Control 1. To turn on the Food Processor, press the Speed 1 or Speed 2 button. The Food Processor will run continuously and the indicator light will glow. 2. To stop the Food Processor, press the “O” (OFF) button. The indicator light wil...
Page 18 - Removing Processed Foods
18 Removing Processed Foods 1. Press the “O” (OFF) Button. 2. Unplug the Food Processor before disassembling. 3. Turn the work bowl cover to the left and remove. 4. If using a disc, remove it before removing the bowl. Holding the disc by the 2 À nger grips, lift it straight up. Remove the adapter. 5...
Page 19 - Using the Multipurpose Blade; TIPS FOR GREAT RESULTS
19 ENGLISH Using the Multipurpose Blade To chop fresh fruits or vegetables: Peel, core, and/or remove seeds. Cut food in 2.5-3.75 cm (1 to 1 1 / 2 -inch) pieces. Process food to desired size, using Speed 1. Scrape sides of bowl, if necessary. To puree cooked fruits and vegetables (except potatoes): ...
Page 20 - Using a Slicing or
20 To À nely chop citrus peel: With sharp knife, peel colored portion (without white membrane) from citrus. Cut peel in small strips. Process until À nely chopped. To mince garlic or to chop fresh herbs or small quantities of vegetables: With processor running, add food through the feed tube. Proces...
Page 21 - Using the Dough Blade; Helpful Hints
21 ENGLISH Using the Dough Blade The dough blade is specially designed for mixing and kneading yeast dough quickly and thoroughly. For the best results, do not knead recipes which use more than 475 - 710 ml (2-3 cups) of Á our. To cut julienne, or match stick, strips of vegetables and fruits using t...
Page 23 - TROUBLESHOOTING; PART NUMBERS FOR ACCESSORIES; Included Accessories:
23 ENGLISH If your Food Processor should malfunction or fail to operate, check the following: Food Processor doesn’t run: Make sure that the bowl and lid are properly aligned and locked in place and the large food pusher is inserted in the feed tube. When using the large feed tube opening, make ...