Kenmore DS4065 - Manuals - manualsarea.com

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

- 3 - WARNING! READ ALL INSTRUCTIONS IN THIS GUIDE BEFORE ASSEMBLING OR USING YOUR VACUUM CLEANER. To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow all safety precautions listed below. IMPORTANT SAFETY INSTRUCTIONS • Use your vacuum onl...

Page 4 - SAVE THESE INSTRUCTIONS; NOTICE

- 4 - IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Household use only. • Do not pick up hard or sharp objects such as glass, nail, screws or coins that could damage the vacuum cleaner. • To avoid excessive heat and damage to unit or batteries, do not operate the vacuum while charging. • Do ...

Page 5 - VACUUM CLEANER WARRANTY; LIMITED WARRANTY

- 5 - VACUUM CLEANER WARRANTY LIMITED WARRANTY FOR ONE YEAR from the date of sale this product is warranted against defects inmaterial or workmanship. WITH PROOF OF SALE a defective product will be replaced free of charge. The Kenmore brand is used under license. Direct all claims for warranty servi...

Page 6 - Item

- 6 - PARTS AND FEATURES It is important to know your vacuum cleaners parts and features to assure its proper and safe use. Review these before using your vacuum. REPLACEMENT PARTS To order a replacement part, call 1-877-531-7321 (US) / 1-844-608-3081 (CA). Item Part No.(US) Part No.(CA) HEPA Filter...

Page 7 - PARTS AND FEATURES

- 7 - PARTS AND FEATURES Hand Vacuum 2-in-1 Combination Tool Screw (2) Motorized Nozzle Charging Adapter Wand Wall Mountable Bracket

Page 9 - ASSEMBLY INSTRUCTIONS

- 9 - 1. Insert the hand vacuum into the top of the wand until you hear a click. Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use this list to verify that you have received all the components of your new Kenmore CSV Go Cordless Stick Vac. ASSEMBLY INSTRUCTIONS 2. Insert the...

Page 10 - WARNING; Before charging make sure the unit is; CHARGING

- 10 - 1. Insert the charging adapter plug into the charging port on the side of the hand vacuum base. 2. Plug the adapter into a wall outlet. The battery indicator will begin to pulse blue. WARNING Before charging make sure the unit is turned OFF. CHARGING NOTE: The unit can be charged while it is ...

Page 13 - make sure the unit is turned off before any maintenance.; EMPTYING DUST CUP AND CLEANING FILTER; Dust Cup Emptying

2. Close dust cup lid until you hear a click. WARNING: Do not operate vacuum cleaner without filters in place.1. With one hand grasped around the handle, press the filter release button to separate the dust cup and filters from the hand vacuum. VACUUM MAINTENANCE AND CARE CAUTION To reduce the risk ...

Page 15 - CAUTION; Risk of injury. Brush may start; CLEANING THE MOTORIZED NOZZLE & BLOCKAGES

Brush Roll Manual Cleaning 1. Make sure the vacuum cleaner is turned off. Remove the wand and the hand vacuum from the motorized nozzle and set aside. 2. Turn the nozzle over to access the brush roll. As shown below, press and push the tab on the left hand side of the nozzle to the left and hold it....

Page 16 - Do not use scissors or other sharp objects

NOTE: It is recommended to store the vacuum within a temperature range between 39.2°F (4°C) and 104°F (40°C). 2. Carefully remove any debris or blockage from the inside of the hose. Reattach the motorized nozzle onto the wand. 3. Once the blockage is removed, start the vacuum to ensure air flow thro...

Page 17 - PROBLEM

- 17 - Review the table for solutions to minor performance problems. Any service needed, other than maintenance described in this Use & Care Guide, should be performed by a qualified service dealer. TROUBLESHOOTING WARNING Disconnect electrical supply before performing maintenance to the vacuum ...

Page 18 - TROUBLESHOOTING

- 18 - TROUBLESHOOTING Brush roll in the motorized nozzle is not turning. Debris accumulates on metal contacts connecting the dust cup and the main body of the hand vacuum. Remove the debris and reinstall as instructed on page 14. The dust cup is installed incorrectly. Reinstall the dust cup correct...