Kenmore ASPIRADORA 116.34722- Manuals

PILE HEIGHT SELECTION AND SETTING SOME MODELS To select a pile height setting: Turn off cleaner. Select a pile height setting by tilting the cleaner back until front wheels are lifted slightly off the floor as illustrated. Slide the adjustment lever to the correct setting. Models with no selector ad...

ATTACHMENTS ü WARNING Personal Injury Hazard DO NOT place hands or feet under­neath the unit. When using the attachments, the agitator rotates. Do not allow the cleaner to remain in just one place for a period of time, as the agitator may damage the floor surface. Avoid placing the vacuum on furnitu...

VACUUMING TIPS Carpet edges Guide either side or the front of the nozzle along a baseboard. The full width agitator brushes help remove dirt at carpet edges. Note: When using attachments make sure the cleaner is in the upright position. VWVRNING Personal Injury Hazard Use care if vacuum cleaner is p...

VACUUM CLEANER CARE Always follow all safety precautions when cleaning and servicing the vacuum cleaner. A |VW\RNING Electrical Shock And Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec­ trical shock or personal injury ...

DUST BIN CLEANING Always empty the dust bin when dirt level reaches the “MAX FILL" line. A WARNING Electrical Shock And Personal Injury Hazard Always unplug power cord from elec­ trical outlet before performing any service on vacuum. TO REMOVE DUST BIN Remove dust bin assembly from cleaner by li...

DUST BIN ASSEMBLY Lid The Lid houses the filter. Filter Filter traps dirt and debris that is picked up by the suction motor. Filter Screen The filter screen traps larger particles of dirt and debris from reaching the filter. Dust Bin Captures dirt and debris picked up from the suction motor. 11

DUST BIN FILTER CHANGING / CLEANING Check primary filter frequently and clean when dirty. Remove the dust bin assembly as outlined in the DUST BIN CLEANING section and empty contents of dust bin. Make sure dust bin is empty before filter is removed. Grasp filter screen, rotate counter-clockwise and ...

FILTER REPLACEMENT Primary Filter Before replacing the filter it is a good idea to clean the inside of the dust bin and lid area. Rotate filter clockwise until slots lock onto tabs in lid. NOTE: Under normal use and care, your fil­ ter can be expected to last up to 3 years, NOTE: See Parts and Featu...

REPLACING HEADLIGHT BULB Ensure ON-OFF switch is OFF. Disconnect power cord from electrical outlet. Press handle release pedal and rotate the handle down so the cleaner is laying flat on the floor. Pry out light lens at slots. Remove old bulb from the socket by pulling from socket. Replace bulb by p...

BELT CHANGING AND AGITATOR CLEANING m WARNING Electrical Shock Or Personal Injury Hazard Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec­ trical shock or personal injury from cleaner suddenly starting. Frequently check and remove hair, string...

Remove the agitator to check for string and hair build-up. NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacu­um, the agitator must be cleaned every time the belt is changed. The agitator must also be cleaned accord­ ing to the following schedule: Vacuum Use HEAVY - (...

TROUBLESHOOTING Review this chart to find do-ihyourseif solutions for minor performance problems. Any service needed, other than those described in this owner’s manual, should be performed at a Sears service center. A WARNING Electrical Shock Hazard Disconnect electrical supply before servicing or c...