Kawasaki B9272 - Manuals

About Thermal Fuses Your Power Wheels ® 12 volt battery is equipped with a built-in thermal fuse. The thermal fuse is a self-resettingsafety device which automatically “trips” and shuts downoperation of the vehicle if the vehicle is overloaded or thedriving conditions too severe. Once a fuse has “tr...

Assembly 8 • Fit a cap nut on the end of the rear axle. • Fit the cap nut assembly tool over the cap nut. Tap the end of the cap nut assembly tool with a hammer to secure the cap nut on the end of the rear axle. Pull on the rear wheel to be sure it is secure. Hint: You may need the help of another a...

9 Proper label application will help to keep the labels looking their best! When applying labels, keep the followingguidelines in mind: • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Pl...

IMPORTANT! Use only a Power Wheels ® 12 volt battery with built-in thermal fuse. Use of any other battery willdamage your vehicle. Make sure that you charge the batteryfor at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the firsttime. Charge the ...

Battery Care and Disposal • Your Power Wheels ® battery is a sealed lead-acid battery. It must be recycled or disposed of in anenvironmentally sound manner. • Do not dispose of a lead-acid battery in your regular, household trash. The incineration, landfilling or mixing of sealed lead-acid batteries...

Teach Safety Rules to Children While children can quickly develop the skill necessary todrive this vehicle, it is important to remember that theirjudgment skills are still very immature. Unsuperviseddriving by children can lead to serious injury. Beforechildren use this vehicle, an adult should care...

Reverse • Press the DRIVE button on the tank. • Press the foot pedal. The vehicle drives forward at a maximum of 2 1 / 2 mph. • Help your child practice steering to learn how far and how quickly to turn the handlebar when driving forwardin low speed. • Your vehicle has a patented, electronic braking...

IMPORTANT! To avoid damaging the motors and gears, stop the vehicle before shifting between low and high speed. How to Operate Your Vehicle Statement of Limited Warranty M 16 High Speed Twist Grip to Activate High Speed • Turn the right grip to shift the vehicle into high speed. The vehicle drives f...

Problem Possible Cause Solution Vehicle does not run Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle forthe first time. After first-time use, recharge the battery for at least 14 hours after each use. Never charge the bat...

Vehicle was running but Loose wire or loose connectors Check all wires and connectors. Make sure the motor suddenly stopped harness connector is tightly plugged into the battery, and that there are no loose wires around the motors. Tripped thermal fuse Each Power Wheels ® 12 volt battery has a built...

IMPORTANT! DO NOT use this vehicle for the first time until you have charged the battery for 18 hours. Remember to … ✔ Charge the battery immediately after each use. ✔ Charge the battery once a month during storage, even if the vehicle has not been used. Failure to follow these instructions will per...