Kawasaki 840168 - Manuals - manualsarea.com

Page 3 - IMPORTANT SAFEGUARDS; Wash hands after handling.

IMPORTANT SAFEGUARDS People with electronic devices, such as pacemakers, should consult theirphysician(s) before using this product. Operation of electrical equipment inclose proximity to a heart pacemaker could cause interference or failure ofthe pacemaker. Some dust created by grinding, drilling, ...

Page 6 - CONTROLS AND COMPONENTS:

Never touch the collet or bit immediately after use. To prevent short circuits, clean the tool's vents regularly with compressed air. Do not alter or misuse tool. This drill is not a dental tool. Do not use on the teeth of animals or humans. SYMBOLS IMPORTANT: Some of the following symbols may be us...

Page 7 - Hold the tool in your hand and find your best grip.; OPERATING SPEEDS; Speed is affected by voltage changes. If the incoming volt-; OPERATING INSTRUCTIONS; Slow; Rotary Tool Speed Settings

This rotary tool is a multipurpose power tool. It is a drill, polisher, power brush,grinder, cutter, and sander all in one. This high-speed, low torque tool is easy tohandle and accepts a wide range of accessories from polishers to router bits to wirebrushes and grinding wheels. The high speed allow...

Page 9 - Please store the flexible shaft in the designated compartment; Not for use with router bits.; Use with router bits with; Only tighten flexible shaft nut finger tight. DO NOT use; Tighten the collet nut as described above.; BALANCING

CONNECTING FLEXIBLE SHAFT TO TOOL (MODELS 840168 AND 840169) Never bend the flexible shaft with a radius of less than 6” when operating. Please store the flexible shaft in the designated compartment of the tool box when not in use. Not for use with router bits. Use with router bits with cause kickba...

Page 10 - Only tighten by hand. DO NOT use pliers or wrench.; Remove spindle nut from the tool by turning it counterclockwise.

4. Slide the collet nut over the drive shaft and thread it onto the motor shaft by turning the collet nut clockwise. Tighten the collet nut using the collet wrench. 5. Remove the right angle attachment adapter and collar from the right angle attachment by turning the collar counterclockwise. 6. Fast...

Page 11 - RIGHT

TYPES OF ACCESSORIES Your rotary tool may be used with the following accessories: Sanding Bands: These small drum sanders help you shape and smooth surfaces in tight places. Replacebands when they become worn. Bands come in finegrades for finish and delicate work and coarsegrades for heavier work. S...

Page 12 - Failure to follow all the warnings for using attachments

Collets: Collets of various sizes are used to accommodate accessories with different-sizedshanks. Refer to the section on Collet Sizes forinstructions on changing the collet. Threaded-tip shanks: Threaded-tip shanks are used for felt polishing wheels. Shankswith a long threaded tip are used for poin...

Page 13 - The above; COMMERCIAL OR RENTAL PURPOSE.; Voltage

3 YEAR LIMITED WARRANTY Express and Exclusive Limited Warranty to Original Retail Buyer Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retailpurchaser of the accompanying KAWASAKI(tm) power tool and no one else allparts of the product (except those parts refer...

Page 15 - Limitations on Warranty Disclaimers

28 REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCHDAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OFTHE PRODUCT. ANY AND ALL LIABILITY CON...

Kawasaki 840168 - Manuals

Manuals:

Manual Kawasaki 840168

Summary

Kawasaki Manuals