Page 2 - Content
2 Content Warning .................................................................................................................................. 3Before Lighting ........................................................................................................................ 4Safety Preca...
Page 3 - Warning
3 Warning To reduce the risk of fire, burn hazard or other injury, read the USER MANUAL carefully and completely before using this appliance FOR OUTDOOR USE ONLY Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliances. An LP cylinder ...
Page 4 - Before Lighting; MAIN BURNER
4 1. Do not store spare liquid propane gas cylinder under or near this appliance.2. Never fill the cylinder beyond 80 percent capacity3. Liquid propane cylinder must be fitted with an OVERFILL PROTECTION DEVICE (OPD). 4. The size for 20Ibs LP gas cylinder is 12.2 inches in diameter and 17.9 inches t...
Page 5 - Safety Precautions
5 When using this grill basic practices must be followed,including but not limited to following: Safety Precautions Do not repair or replace any part of the grill unless specifically recommended in this manual. All other service should be referred to a qualified technician. Children should not b...
Page 6 - Assembly; TOOLS REQUIRED
6 Assembly Before assembly, make sure all parts are present. If any part is missing or damage, do not attempt to assemble the appliance. TOOLS REQUIRED * Philips screwdriver ( not included) 1. Built in bracket assembly 2. Flame tamer assembly 3. Cooking grid assembly 4. Warming rack assembly 5. 1X A...
Page 7 - For rotisserie kit sets; Electrical Grounding Instructions
7 6. For transformer 7. For rotisserie kit sets a). To protect against electrical shock, do not immerse cord or plug in water or other liquid; b). Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts; c). Do not operate any outdoor cooking g...
Page 8 - GENERAL
8 Connecting the Liquid Propane Gas Cylinder To connect the liquid propane gas cylinder: 1. The cylinder valve should be in OFF position. 2. Make sure the burner valve is in OFF position. 3. Inspect the valve connections, port and regulator assembly. Remove debris and inspect the hose for damage. 4....
Page 10 - Care and Maintenance; STAINLESS STEEL; COOKIING GRATE; GREASE PAN
10 Care and Maintenance STAINLESS STEEL There are many stainless steel cleaners available. Always use the mildest cleaning process first, scrubbing in the direction for the grain. DO NOT use steel wool as it will scratch the surface. To touch up noticeable scratches in the stainless steel, sand very...
Page 11 - Built in; Cabinet Cutout Dimension; Built in outdoor grill Enclosure ventilation requirement
11 Built in Cabinet Cutout Dimension The illustration below includes cutout dimensions and minimum spacing requirements. The installation of this grill must confirm with local codes, or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NPFA 54, Natural Gas and Propa...
Page 12 - Put the grill on the cabinet
12 -Any enclosure for built in installation is to have at least one ventilation opening on an exposed exteriors side located within 2 ½” (6cm) of the top and is to be a minimum 20 in.2 (129 cm2). One ventilation opening within 1 ½” (3cm) of the bottom of the enclosure, and the bottom openings is to ...
Page 13 - Mount the bracket on the cabinet
13 3. Mount the bracket on the cabinet 4. FOR NG * Connect the QDD to the natural gas supply, then connect the grey hose To QDD * Connect the grey hose to the grill
Page 14 - Convert from LPG to NG; The conversion is to take away the LP Orifice and leave
14 Convert from LPG to NG This grill is certified with either Liquid Propane (LP Gas) or Natural Gas and come complete with the necessary parts to convert the grill from use with Natural Gas hose and regulator. The process of converting is relatively simple. Both the LP Orifice and the NG Orifice ha...
Page 15 - Tools Required for Converting from LP to NG; Main Burner Conversion
15 Tools Required for Converting from LP to NG Main Burner Conversion 1. Unscrew and remove the rear panel pictured. 2. Unscrew the main burner securing screws and remove the burner, sitting it alongside. CAUTION: BEFORE PROCEEDING THE CONVERSION, SHUFF OF THE GAS SUPPLY TO THE APPLIACNES PRIOR TO D...
Page 16 - LPG JET; Rear Burner Conversion
16 3. With the burner removed, you will see the brass gas jet (LPG) which is screwed into the end of the valve. Using the 6mm nut driver supplied, unscrew the end LPG jet while retaining the inner (NG) jet. LPG JET NG jet remained 4. Reassemble the burner Please make sure properly locating the burne...
Page 17 - TO CONDUCT LEAK TESTING
17 2. Remove the LPG jet from the elbow shaped brass injector assembly. Connect the QDD to the Natural gas supply, then connect the grey hose to QDD LEAK TESTING MUST BE DONE ON THE APPLIANCE AFTER CONVERSION PRIOR TO PLACING IT INTO OPERATION. PLEASE FOLLOW “ LEAK TESTING” IN THIS MANUAL TO CONDU...
Page 18 - Trouble Shooting; Problem
18 Trouble Shooting Problem Possible Cause Prevention/Solution Burner will not light. •No gas flow. •Coupling nut and regulator not fully connected. •Obstruction of gas flow. •Disengagement of burner to valve. •Is grill assembled correctly? • Check to see if LP tank is empty. • Turn the coupling nut...
Page 19 - Kalamera Limited Warranty
19 Kalamera Limited Warranty Full One Year Warranty Terms: The manufacture warrants to the original purchaser of this product that the product will be free from manufacturingdefects in workmanship and material for a period of 1 year from the date of original purchase when this major appliance isoper...
