JVC WB-1550U - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS

2 These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions.2. Save these instructions for later use.3. All warnings on the product and in the operating instructions should be adhered to.4. Unplug this appliance s...

Page 3 - CAUTION

3 I Due to design modification, data given in this instruction book are subject to possible change without prior notice. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en...

Page 4 - Getting Started; To save energy, switch off the system when not in use.; Table of Contents

4 Getting Started Thank you for purchasing this product. (These instructions are for WB-1540U/ WB-1550U)Before beginning to operate this unit, please read the instruction manual careully in order to make sure that the best possible performance is obtained. Getting Started Table of Contents ............

Page 5 - System Example; Ensure to turn of the power of devices in use before connecting.

5 System Example VN-C625U and VN-C655U Systems CAUTION: T 1: Not in use on this system. Ensure to bind both ends of cables that are not in use with insulating tape. T 2: Power will not be supplied to this unit and the installed camera when the fuse on the main board burns out. When this occurs, plea...

Page 6 - Disassembling the Housing; FRONT] Mark of the ceiling

6 Installation and Connection (WB-1540U) 1. Dismantle the gasket and gasket gland Loosen the 6 Screws B (M4) using a driver, followed by dismantling the gasket and gasket gland from the lower housing. T The 6 Screws B (M4) cannot be totally removed from the gasket to prevent it from falling off. 2. ...

Page 7 - Preparation; FRONT] mark of the ceiling

7 1. Dismantle the camera mounting bracket Loosen the screws on the camera mounting bracket (M4, 4 pcs) using a driver to dismantle it. 2. Dismantle the converter unit mounting bracket Loosen the screws on the conver ter unit mounting bracket (M3, 2 pcs) using a driver to dismantle it. 3. Mount the ...

Page 9 - Connect the necessary cables.; Bind cable using a waterproof tape; with waterproof seal. With the Cable; Close the cable connection cover; using the provided hexagon wrench.; Mounting the Housing to the Wall (continued); Use GE silicon or its equivalents as the sealing material.

9 4. Open the cable connection cover Use provided hexagon wrench to remove the 4 screws (M3 x 12) from the cable connection cover to open it. 5. Connect each cable Connect the necessary cables. 6. Bind cable using a waterproof tape Upon connecting, ensure to perform waterproofing procedures by bindi...

Page 10 - Dismantle the camera body cover.

10 Installation and Connection (WB-1550U) 1. Dismantle the gasket and gasket gland Loosen the 8 Screws B (M4) using a driver, followed by dismantling the gasket and gasket gland from the lower housing. T The 8 Screws B (M4) cannot be totally removed from the gasket to prevent it from falling off. 2....

Page 11 - During mounting, align the

11 1. Connect the AC 24 V output cable to the camera Connect the AC 24 V output cable to the ceiling mount of the camera to be installed. 2. Connect other cables Connect the coaxial video cable and communication cables (alarm signal, control terminal, etc.) supplied with the housing to the ceiling m...

Page 14 - with waterproof seal. With the Cable connection

14 Installation and Connection (WB-1550U) 4. Open the cable connection cover Use provided hexagon wrench to remove the 4 screws (M3 x 12) from the cable connection cover to open it. 5. Connect each cable Connect the necessary cables. 6. Bind cable using a waterproof tape Upon connecting, ensure to p...

Page 15 - Others; General; Specifications

15 Others 䡵 General Power / Voltage : AC 24 V 50 Hz/60 Hz (Main Housing Unit) Power Consumption : 25 W (During heater operation, excluding camera) Installation Location : Outdoor (general) Ambient Temperature : - 20 I to 50 I (when equipped with TK-C625U/E) : - 20 I to 40 I (when equipped with VN-C6...

Page 16 - OUTDOOR HOUSING