JVC VN-S200U/S100U - Manuals

6 V.NETWORKS No.1 V.NETWORKS No.2 V.NETWORKS No.16 V.NETWORKS No.17 V.NETWORKS No.18 V.NETWORKS No.32 V.NETWORKS No.241 V.NETWORKS No.242 V.NETWORKS No.256 Construction of MULTI CAMERA BROWSER Work space (*.vnw) View window No.1 View window No.2 View window No.16 *The figure above shows the construc...

7 This section describes the installation procedure of the application. 1. Insert the "VN_S200U" CD-ROM in the CD-ROM drive (* with the VN-S200U).2. Double-click \Jvc\setup.exe of the CD-ROM in order to run it. INSTALLATION In advance, set the IP addresses of the VN-C1U/C2U/C3U cameras tobe ...

9 VIEWING V.NETWORKS IMAGES This section describes the operations procedure for displaying V.NETWORKSimages on your PC. 1. Start the Multi Camera Browser. 1-1. From "Start" on the taskbar, select [Programs] - [V.NETWORKS] - [vn- s200u Multi Camera Browser] to start it. 2. Create a workspace ...

10 4. Create a View window 4-1. On the menu bar, select [View Window] - [New View Window]. 4-2. When a window is displayed, enter the View window name in it. 4-3. On the "View Window Setup" item, select the View window where you want to add the V.NETWORKS and click the <Add> button. 4-...

12 Procedure 1. On the menu bar, select [View] - [Controller].2. Among the currently displayed View windows, click the one where the V.NETWORKS to be controlled is registered in order to make it active. 3. If more than one V.NETWORKS has been registered in the View window, interrupt the image switch...

14 RECORDING V.NETWORKS IMAGES • The recording function saves images displayed in the currently active window onto a disk. • Images are recorded on a per-window basis. The recording file is stored inthe folder specified by "Save in" under [View Window] - [Properties] -[Details]. The default ...

15 DELETING RECORDING FILES • Recording files are saved with file names "<recording start time>.rec". • To delete recording files, open the Explorer and delete files "*.rec". CAUTION !! As a recording file cannot be restored once it has been deleted,make sure that the file is u...

16 Procedure 1. Select [View Window] - [Timer Recording].2. The [Timer Recording] window appears.3. In the View window column, select the View window you want to set timer recording. 4. To set timer recording, check one of the [Timer 1 to 5] check boxes and set the [Recording start time], [Recording...

17 Procedure (* The following procedure is applicable to 2 screen playback.) 1. Click the Play button of the Record/Play Controller. When a window as shown below appears, select the size and number of played windows. 2. When the Select Image window appears, select the View window to be played and th...

19 Procedure 1. Click the View window where the images that you want to include as snapshots are displayed. 2. Click the Snapshot button of the Record/Play Controller. If the Record/ Play Controller is not displayed, select [View] - [REC/Play Controller] todisplay it.*A check mark is displayed to th...

20 MANAGEMENT EXPLORER • This window has a similar appearance to Windows Explorer and facilitatesthe window management operations such as changing the settings of the[View window] and [V.Networks] windows as well as enabling their additionand deletion. 1. Displaying the Management Explorer 2. Regist...

21 2-2.When a box as shown below appears, perform registration of V.Networks in this box. (* For details of the V.Networks registration procedure, see [3-2] on page 9.) 3. Creating a View Window 3-1.Right click the root item (item at the top) in the View window list (on the left of the Management Ex...

22 A camera group can be created in the V.Networks list (on the right of the screen) for subject management use. Right click the root item or a camera group and select [New] - [Group]. 5. Adding V.Networks to a View Window 4. Creating a Camera Group (Camera groups can be created in up to two layers....

23 6. Changing the Setting of a View Window 7. Changing the V.Networks Setting Double-click the View window for which the setting is to be changed, or right click it and select [Properties]. The [View Window Setup] box will appear. Double-click. (* For details of the View window setting operation, s...

26 1-1. When [View Window] - [Properties] in the menu bar is selected, the following window appears.Use this window to change the setup of theView window. 1-2. Select the View window you want to change the setting. 1-3. The list of currently registered V.NETWORKS names is shown under item [Currently...

27 1-4. Click the [Add] button. When the [Add V.Networks] window appears showing the list of V.NETWORKS currently registered in the workspacesselect the V.NETWORKS you want to add and click the [Add] button.The addition is complete when the name of the added V.NETWORKSis displayed in the [Currently ...

31 SETTING ACCENT FRAME OF VIEW WINDOW An Accent Frame makes it easy to identify the active (currently selected) Viewwindow. Procedure 1. In the menu bar, click [View Window] - [Accent Frame].2. Check the check box in the following box to set the Accent Frame. (* The color and thickness of the Accen...

32 [Compression Rate] • Specifies the level of image compression. [Quality] *Specifies the image quality. Saturation Adjusts the color depth of colors. Color Balance Adjusts the balance blue and red. Gain (*) Adjusts the sensitivity. Exposure (*) Adjusts the iris. Contrast (*) Adjusts the contrast. ...

34 Procedure 1. In the menu bar, click [V.Networks] - [Position Memory].2. Select the V.NETWORKS for which you want to change the position memory.* The current registration information is displayed in the [PAN/TILT/ZOOM] field. 3. Operate the panning, tilting and zooming to set the conditions you wa...

35 The following procedure sets the operation to be performed when an alarmsignal is triggered.(It is required to set up the V.Networks alarm in advance. For the setup ofV.Networks, refer to the "Setup for the Alarm Function" in the manual providedwith the V.Networks.) Procedure 1. In the me...

38 ARRANGING THE WINDOWS • Arrange Windows • Arranges the View windows. (Arranging is sometimes not possible depending on the numbers and sizes of the windows.) • Align with Grid • Arranges the View windows by automatically aligning them with the grid. • Show All/Hide All • Show or hide all of the r...

40 UNINSTALLATION (Procedure for Windows98) Use the following procedure to uninstall (Delete) the Multi Camera Browserfrom your PC. 1. In the taskbar, select [Start] - [Settings] - [Control Panel] 2. In the Control Panel, double-click "Add/Remove programs". 3. When the [Add/Remove programs P...

41 The list of the IP addresses of the V.NETWORKScameras connected to the network can be acquiredusing the [Search] button of the V.NETWORKSsetup tool provided with the VN-C1U/C2U/C3U.The history of modifications with the V.NETWORKSsetup tool is stored in file "Vnetst.log" in the rootdirecto...