JVC VN-C655U - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS

2 PORTABLE CART WARNING (symbol provided by RETAC) S3125A IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet befo...

Page 3 - Safety Precautions; INFORMATION; CAUTION

3 Safety Precautions CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS I N S I D E . R E F E R S E RV I C I N G TO QUALIFIED SERVICE PERSONNEL. The lightning flash wish arrowheadsymbol, within an equilateral triangle isintended to aler t the user ...

Page 4 - Introduction

4 Contents ................................................................................................. 4Features ................................................................................................. 5Operating Precautions ...............................................................

Page 7 - Note on consumable parts

7 Zooming When zooming is stopped near the Telephoto endduring manual operation or by selecting a presetposition, focusing may deviate slightly. In addition,the manual zooming operation may not always besmooth.These phenomena are due to the characteristicsof the built-in lens and are not malfunction...

Page 8 - Characters and Symbols used in this Manual; Functional or operational tips.; How to Use This Manual

8 Items Included CD-ROM (The Instruction Manual inside) Read Me First AC Adaptor Ceilling Mount Cable Plate Screw (M3x12 mm) Warranty Card Service Information Card Power Cord (1.8 m) Introduction Characters and Symbols used in this Manual Caution Operational points special attention should be paid t...

Page 9 - PC Specifications; Note

9 Required Operating Environment Upgrading the Application For information on upgrading the application, visit the following website.http://www.jvc-victor.co.jp/english/pro/vnetworks/index-e.html PC Specifications OS : Windows 2000 (Service Pack 1 or higher) Windows XP Home EditionWindows XP Profess...

Page 10 - Controls, Connectors and Indicators; Ceiling Mount; Locking Screw; Connect to a supplied AC adaptor.; Safety Wire Hole

10 Controls, Connectors and Indicators Ceiling Mount 1 [MONITOR OUT] Coaxial Cable Terminal Output Terminal of a composite video signal(1 Vp-p) with an output impedance of 75 Ø , to be connected to video monitor, etc.( ☞ Page 16) 2 Locking Screw Tighten this screw to fasten the camera clamp-ing brac...

Page 12 - Connection Examples; Network Connection; Preparations

12 LAN INTERNET PC PC Images are automaticallyupdated at a regular interval. FTP Server VN-C655 VN-C655 PC Cross Cable VN-C655 PC LAN VN-C655 VN-C655 Connection Examples Network Connection Peer-to-Peer Connection LAN Connection Preparations VN-C655(reed me)_p2-29 04.9.22, 8:18 PM 12

Page 13 - Set the camera in the following procedure.; Preparation Procedure; C655 first and then setting the camera (; Step 2 Setting the Network; ing and stopping Auto Pan, Auto Trace and Auto Patrol.; Step 3 Setting with V.Networks Controller; the camera from falling off.

13 Set the camera in the following procedure. Preparation Procedure ❈ In a system where more than one VN-C655 are used, turn on the power for a VN- C655 first and then setting the camera ( ☞ Page 28, Setting the IP Adress for VN- C655 with V.Networks Setup tool). Only then turn on the power for a se...

Page 14 - Cable Connections; Preparations (Step 1 Connection and Installation); Caution; Connect the cables; Connect the cables to the terminals on the Ceiling Mount.; Connect to the hub or PC.; Diameter 90 mm

14 Cable Connections Preparations (Step 1 Connection and Installation) Caution In order to prevent foreign objects from entering inside the ceilingn mount be sure to attach thehemispherical cover correctly. The penetration of foreign objects into the Ceiling Mount maycause a malfunction and smoking ...

Page 15 - Connecting the Power Cord; Connect the camera to DC 18 V.

15 3 Connecting the Power Cord Connect the camera to DC 18 V. For a system with multiple VN-C655s In a system where more than one VN-C655 are used, turn on the power for a VN-C655 first and thensetting the camera ( ☞ Page 28, Setting the IP Adress for VN-C655 with V.Networks Setup tool). Only then t...

Page 17 - Connecting a LAN Cable; Connect the camera to a hub or a PC by using a LAN cable.; Use a straight cable.; For PC connection

17 5. Connecting a LAN Cable Connect the camera to a hub or a PC by using a LAN cable. Note For 100 BASE-TX, use a CAT-5 cable. • For hub connection Use a straight cable. • For PC connection Use a cross-over cable. Caution There are a few types of LAN board forwhich a cross-over cable cannot be used...

Page 18 - Input Requirements; • No-voltage relay input or NPN open collector; Alarm Input Terminal; • The connector can be released by loosening the

18 6. Connecting the Alarm I/O Terminals Connect to the equipment with alarm input terminal using the alarm signal cable. Input Requirements • No-voltage relay input or NPN open collector input • The polarity of the input detection can be selected via software. • Make/Break/Toggle (at least 500 ms)•...

Page 19 - Alarm Output Terminal; Output Requirements; • Equivalent to NPN open collector output

19 This terminal is for connecting with an alarm annunciator such as an indicator, alamp or a buzzer. 8. Alarm Output Terminal Output Requirements • Equivalent to NPN open collector output (The output logic is set with [V.Networks SetupTool.]) • Allowed applied voltage: DC 12 V max.• Allowed input c...

Page 20 - Attaching the Ceiling Mount

20 1. Attaching a safety wire.Attach a safety wire to the Ceiling Mount andto the ceiling slab or channel to prevent theunit from being able to fall to the floor. Firstattach the safety wire to the Ceiling Mount bypassing the wire through the safety wire hole(see the diagram on the left). 2. Attachi...

Page 21 - Attaching the Camera; • Do not connect cameras other than

21 Attaching the Camera 1. Attach the drop prevention wire.As shown in the diagram, take the drop pre-vention wire from the camera and attach it tothe hook on the Ceiling Mount.Be sure to connect the drop prevention wire.Otherwise, the camera will not fit properly tothe Ceiling Mount. If they are en...

Page 23 - Installing the Software; Installing V.Networks Controller; registration of the Mpeg4d Decoder DMO.

23 Installing the Software Installing V.Networks Controller 1. Select [Setup.exe] found in the [JVC] folder.2. Proceed by following the instructions shown on the screen.3. If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the Windows [Start] menu. [V.Net...

Page 24 - Setting the PC’s IP Address for Windows XP; Ensure that [Client for Microsoft Networks]

24 Setting the PC’s IP Address for Windows XP Settings (Step 2 Setting the Network) After attaching the camera, proceed to set the IP address of the PC by which thecamera is operated.With Windows XP, follow the procedure below to set the IP address.(For Windows 2000, ☞ Page 26) Note Under a DHCP env...

Page 25 - Click; Click .; Ask the network administrator if necessary.

25 3. Select [Internet Protocol (TCP/IP)] and click [Properties]. 4. Select [Use the following IP address] to set [IP Address] and [Subnet Mask] and then click . Select [Internet Protocol (TCP/IP)]. 5. Click in [Local Area Connection Properties]. Click . Click . Select [Use the following IP address]...

Page 26 - Setting the PC’s IP Address for Windows 2000

26 Setting the PC’s IP Address for Windows 2000 Settings (Step 2 Setting the Network) After attaching the camera, proceed to set the IP address of the PC by which thecamera is operated.With Windows 2000, follow the procedure below to set the IP address. 1. Click . Select [Settings] and click [Contro...

Page 28 - Setting the IP Address for VN-C655 with V.Networks Setup Tool

28 Setting the IP Address for VN-C655 with V.Networks Setup Tool Settings (Step 2 Setting the Network) Set the IP address for VN-C655 by using the installed [V.Networks Setup Tool].(With this [V.Networks Setup tool] only VN-C655, not other models, can be connected.) Note Click [Search] to see the IP...

Page 29 - next page

29 Note In a system where more than one VN-C655 are used, turn on the power for a VN-C655 firstand proceed the setting to Step 3 Settings with V.Networks Setup Tool. Only then turn on thepower for a second one and go on to Step 3. Repeat the procedure for the other cameras. 2. Confirm the settings. ...

Page 30 - For connecting VN-C655 with the factory set-; Registering the Connected Camera with V.Networks Controller; Select the distribution method of image.

30 Note For connecting VN-C655 with the factory set- tings, either one of the environments describedbelow is required. • Environment where no DHCP server exists.• Environment where a DHCP server, which clearly defines the IP address and MAC ad-dress allotted to VN-C655, exists. The connected camera ...

Page 31 - Starting Up V.Networks Controller; Live images from the camera are displayed.

31 Starting Up V.Networks Controller Settings (Step 3 Setting with V.Networks Controller) With the installed Controller, camera images can be monitored. The settings forrecording, replay and frame rate etc. can also be performed. 1. Select [Start], [Programs], [V.NETWORKS] and then [V.Networks Contr...

Page 32 - Function Settings with V.Networks Controller

32 Settings (Step 3 Setting with V.Networks Controller) 1 2 3 1 File New : Creates a new file if the cam- era is connected for the firsttime. Delete : Deletes a file. Motion DetectStandby : Not functional on this unit. Exit : Exits “Controller.” 2 View Image Size : Sets the image display size. JPEG ...

Page 34 - Operations with V.Networks Controller; Assign the buttons

34 4 5 6 7 1 3 2 [V.Networks Controller] can be used to select the camera, record and playback thecamera images etc. Operations with V.Networks Controller Operations (Step 4 Operations with V.Networks Controller) 5 STOP Stops recording. 6 REC When this is selected, recording starts. Therecorded file...

Page 35 - Reduced screen

35 Reduced screen ! SIZE : Click again to return to the larger size. Press here to enlarge. 1 Camera @ # ! 0 8 9 8 PAN/TILT button Adjust the Pan/Tilt position. The operatingangle per one Pan/Tilt operation is set usingangle step.The operating speed of Pan/Tilt is performedunder [Pan/Tilt setting] i...

Page 36 - Troubleshooting; Others; Symptoms

36 Troubleshooting Forgotten the VN-C655 IP ad-dress that was changed with[V.Networks Setup Tool]. Unable to record. While “Now Connecting…” isbeing displayed, it takes time tocancel an action. The coloration is unsatisfactory. The operation is disabled for afew seconds when the whitebalance is chan...

Page 39 - External Dimensions; Design and specifications are subject to change without notice.; Ceiling Mount hole

39 ■ External Dimensions ● Design and specifications are subject to change without notice. Unit: mm (inches) 87 (3.425) 152 (5.984) 20 (0.787) 188 (7.402) 190 (7.480) 79 (3.110) SR70 (2.756) ■ Ceiling Mount hole 113 (4.449) 113 (4.449) Screw positions Screwpositions Mounting hole ø90(ø3.543) Unit: m...

Page 40 - DOME TYPE NETWORK CAMERA; DOME T

Printed in ThailandLWT0202-001A-H R is a registered trademark owned by Victor Company of Japan, Limited. R is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. © 2004 Victor Company of Japan, Limited. VN-C655 DOME TYPE NETWORK CAMERA DOME T VN- VN-C655(reed me)_p30-Cove...