Page 2 - ENGLISH; INSTRUCTIONS; COLOR VIDEO MONITOR
ENGLISH INSTRUCTIONS COLOR VIDEO MONITOR TM-H150CG Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. TM-H150CG_Cover.p65 04.1.17, 4:05 PM 5
Page 3 - WARNINGS; THIS APPARATUS MUST; PRECAUTIONS; SAFETY PRECAUTIONS
In order to prevent any fatal accidents caused by misoperationor mishandling the monitor, be fully aware of all the followingprecautions. WARNINGS To prevent fire or shock hazard, do not expose thismonitor to rain or moisture. Dangerous high voltagesare present inside the unit. Do not remove the bac...
Page 4 - Contents; Basic Menu Operations; SCREEN BURN; Supplementary Explanation; POWER CONNECTION; Power cord; Note for the United Kingdom power cord only
ENGLISH Contents SAFETY PRECAUTIONS ................................................................................. 2 Controls and Features .................................................................................... 4 Front Panel ..............................................................
Page 5 - Controls and Features; Front Panel; button; button; Selects the items on the menu screen.; MENU button; UNDER SCAN button
4 Controls and Features Front Panel 1 CHROMA ( : Chroma)/PHASE ( : Phase) button* Press this button to activate the Chroma (picturecolor density) adjustment mode or the Phase(picture hue) adjustment mode. Each time youpress the button, the adjustment modes change. Chroma “ Phase Adjust the value wit...
Page 6 - BLUE CHECK button; Displays only the blue signals.; Display the standard color-bar currently used; ASPECT button; Select an input to display.; Power lamp; Blue
5 ENGLISH 7 BLUE CHECK button Displays only the blue signals. • The button lights while this function is activated.• Pressing the button again restores the normal screen. By using this function with the standard color-barcurrently used, you can check if CHROMA (picturecolor density) or PHASE (pictur...
Page 7 - Rear Panel; Turns on and off the main power.
6 Controls and Features (cont’d) Rear Panel SLOT REMOTE MAKE/ TRIGGER POWER i o e r t y u ; a e VIDEO A terminal Input (IN) and output (OUT) terminals for compositesignals. • The IN and OUT terminals are bridge-connected (auto termination). NOTE: Use the AUDIO A terminals for the corresponding audio...
Page 9 - IMPORTANT; SWITCHED OUT terminal; Connection terminal
8 Controls and Features (cont’d) 7 SDI Input Card (IF-C21SDG/IF-C51SDG) The EMBEDDED AUDIO signal is acceptable. (IF-C51SDG is also equipped with anAUDIO LEVEL METER function.) Input Card (option) (cont’d) 7 Acceptable signal formats when installedon this monitor:525/60i, 625/50i,EMBEDDED AUDIO (8ch...
Page 10 - Preparation; Installing the Input Card; Secure the Input Card by using the screws removed in step
9 ENGLISH SLOT REMOTE MAKE/ TRIGGER Preparation Installing the Input Card 1 Turn off the main power switch on the rear panel of the monitor and unplug the AC powercord from the AC outlet. 2 Unscrew the screws and remove the slot cover from the input card slot on the rear panel ofthe monitor. 3 Inser...
Page 11 - About the Menu Screens
10 Basic Menu Operations (MENU, SET-UP MENU) 7 About the Menu Screens This monitor features MENU which contains the functions normally used and SET-UP MENU which contains the initial settings ofthe monitor. MENU Items Functions APERTURE Adjusts the picture aperture level. ADJ. BAR POSI. Selects the ...
Page 12 - Displaying the menu screens; To display MENU; Press the MENU button on the front panel.; To display SET-UP MENU; Menu Operation Procedure; Press the MENU button.; MENU appears on the screen.; Press the; Initializing the Settings; You can initialize the following settings of the monitor:; by button to turn on the monitor.; Initial settings
11 ENGLISH 7 Displaying the menu screens To display MENU Press the MENU button on the front panel. To display SET-UP MENU Press the fi button while holding down the MENU button on the front panel. • To go back to the previous menu, press the MENU button.• To exit from the menu screen, press the MENU ...
Page 13 - How to Use MENU; RUSH DELAY; Keeps the NTSC color system.; Function, Contents, and the Adjustment Range of Each Item
12 How to Use MENU Function display of the button varies depending on the selected item. Buttons fi% VOLUME/ SELECT(+) VOLUME/ SELECT(–) MENU Displays ∞ 5 + 3 – 2 EXIT Functions Selects the items in forward rotation. Selects the items in reverse rotation. Increases the value (up to the maximum). Sele...
Page 14 - How to Use SET-UP MENU; Moves the screen to the left.
13 ENGLISH How to Use SET-UP MENU EXIT CHROMA MENU PHASE BRIGHT CONTRAST VOLUME/SELECT : 00: 00 : OFF: ON: MAKE: A-D <SET-UP MENU>PICTURE SUB ADJH. POSITIONV. POSITIONWHITE BALANCE CONTROL LOCK STATUS DISPLAY REMOTE SYSTEMINPUT REMOTE . Function and display of the button varies depending on th...
Page 15 - Adjusts the white balance.
14 How to Use SET-UP MENU (cont’d) WHITE BALANCE Adjusts the white balance. NOTE: You can adjust the items in “WHITE BALANCE” separately for eachcolor temperature (6500 or 9300). Select the color temperature youwant to adjust beforehand. Cut-off adjustment • Select “WHITE BALANCE” on SET-UP MENU, th...
Page 16 - How to Use the External Control; About the External Control; How to Use the REMOTE Terminal; Operation; controlled by the external control.; REMOTE terminal
15 ENGLISH How to Use the External Control 7 About the External Control This monitor has the REMOTE (remote) terminal that is used for the operation by an external control.You can select the following control methods according to the setting of “REMOTE SYSTEM” in SET-UP MENU:• MAKE (make contact sys...
Page 17 - Troubleshooting
16 Problems No power supply No picture with thepower on No sound Wrong color Unnatural picture Shaking picture Points to be checked Is the power plug loosened ordisconnected? Is the main power turned OFF? Is the signal cable disconnected? Is the power of the connectedcomponent ON? Is the signal outp...
Page 18 - The following are not malfunctions:; abnormality appears on the screen as well.
17 ENGLISH Problems Irregular color Wrong pictureposition Front panel buttonsdo not function Points to be checked Is the monitor placed or moved close toa speaker or any other deviceincorporating a magnet?Has the position of the monitor beenchanged with the power on? Has the picture position been ch...
Page 19 - Specifications
18 TM-H150CG Color video monitor PAL, NTSC (3.58) 39 cm (15") measured diagonally, 90° deflection, in-line gun, trio-dot type (phosphor dot-trio pitch 0.27 mm) Width: 285.5 mm (11 3/16") Height: 214 mm (8 3/8") Diagonal: 356 mm (14") H: 15.734 kHz (NTSC), 15.625 kHz (PAL) V: 59.94 Hz...
Page 20 - Dimensions; ) are used to indicate the screen dimensions.; Acceptable Signal Formats
19 ENGLISH 360 (14 1 / 4 ) 295.5 (11 3 / 4 ) * 238 (9 3 / 8 ) 20 ( 7 / 8 ) 224 (8 7 / 8 ) * 310 (12 1 / 4 ) 164 (6 1 / 2 ) 418 (16 1 / 2 ) 407 (16 1 / 8 ) 1.5 ( 1 / 16 ) 3.5 ( 1 / 4 ) 60.2 (2 3 / 8 ) 308 (12 1 / 4 ) 3.5 ( 1 / 4 ) 7 Dimensions Unit : mm (inch)• Asterisks ( * ) are used to indicate th...
Page 21 - VIDEO MONIT
VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand0204MKH-MW-MT © 2004 VICTOR COMPANY OF JAPAN, LIMITED TM-H150CG COLOR VIDEO MONIT OR TM-H150CG_Cover.p65 04.1.17, 4:05 PM 2