JVC TK-WD310 - Manuals - manualsarea.com

Page 2 - When replacement parts are required, be sure the service techni-; Safety Precautions; FOR USA AND CANADA; CAUTION; Information for USA

13. Follow all warnings and instructions marked on the appliance.14. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out par...

Page 3 - Features; Camera title setting and display can be made.; Characters and symbols used in this instruction manual.; EASY INSTALLATION; Contents; INTRODUCTION; Operating Precautions; INTRODUCTION

2 Thank you for purchasing this product.(These instrustions are for TK-WD310U and TK-WD310E.)Before beginning to operate this unit, please read the instructionmanual carefully in order to make sure that the best possible per-formance is obtained. Features Backlight compensation over a wide area is r...

Page 4 - Names and Operations of Parts; Lens mount

6 Operating Precautions (continued) ● The white balance (ATW) of this device is optimally set for sunlight.Proper white balance may not be achieved for artificial lighting suchas fluorescent lighting, etc. ● If you use this camera in locations where the camera is exposed tofluorescent light, a slow ...

Page 5 - [VIDEO OUT] Video signal output connector; E type: 50Hz power region only; DC; Basic System; S w i t c h e r; CONNECTION/INSTALLATION

10 Names and Operations of Parts [Rear Panel] SEE INST- RUCTION MANUAL DC12V AC24V 1 2 CLASS 2 ONLY (U TYPE)ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT INT LL SET SELECTOR 8 [DC 12V, AC 24V] Power input terminals To input DC 12V or AC 24V power. 9 [VIDEO OUT] Video signal output connector This BNC ...

Page 6 - Mounting the lens; Mount the lens according to the procedures described below.; Connections on the back; Maximum extension; Memo

14 Mounting the lens Mount the lens according to the procedures described below. (b) (c) F COLOR VIDEO CAMERA IRIS DC VIDEO 3 4 2 1 IRIS DC VIDEO CONNECTION/INSTALLATION 1. Lens mount 3. 4. Ferrite core 2. 5. 1 3 2 4 15 1. Before mounting a lens, check whether it is CS-mount lens.Dimension (b) of th...

Page 7 - mm; Mounting the camera; Fall Prevention; Auto iris lens adjustment; Page 33 “WHITE BALANCE”; • LEVEL adjustment; Too bright

18 MAX. 7 mm CONNECTION/INSTALLATION Camera mountingscrew hole Camera mountingbracket Rotation prevention hole Mounting the camera When mounting the camera on a fixer, pan/tilt, etc., use the cameramounting screw hole located on the camera-mounting bracket. CAUTION: Use the screw with a length short...

Page 8 - Back focus adjustment; • With a fixed-focus lens; MENU SETTING; Menu settings; Operation

22 CONNECTION/INSTALLATION Back focus adjustment Be sure to make back-focus adjustments when changing the lens mount-ing method or using a different lens. ● To make accurate back focus adjustments, carry out adjustments ina state where the lens iris is released.To open the lens iris, set MODE in the...

Page 9 - Menu tree; The menu screens are structured as shown below.; About menus; VIDEO ADJUST screen; Default setting: MODE2; WDR CUSTOM SETTINGS screen

26 MENU SETTING Menu tree The menu screens are structured as shown below. V I D E O A D J U S T . . F O C U S A D J U S T . . C A M E R A S E T T N G S I . . F A C TE X I T O R Y S E T T N G S I . . ME N U W D R A G C C O L O R L E V E L E N H A N C EE X I T E X I T L E V E L M O D E M O D E J U S T...

Page 10 - WDR BIAS; AGC MODE; WHITE BALANCE

30 Item Content WDR BIAS Sets the low/mid luminance level of the WideDynamic Range ● To brighten video with low/mid luminance:Increase the value ● To darken video with low/mid luminance:Decrease the value [Setting range: -36 ~ -8 ~ 36] WDR LIMIT Sets the maximum value of the Wide DynamicRange ● To s...

Page 11 - Default setting: NORMAL; CAMERA SETTINGS screen

34 MANUAL WHITE BALANCE screen If the entire screen appears to be reddish or bluish in color as the resultof automatic white balance adjustment, manually adjust the white bal-ance. Fill the entire screen with a white sub-ject (such as paper, cloth, etc.). 1. D i s p l a y t h e V I D E O A D J U S T...

Page 12 - FACTORY SETTINGS screen; Troubleshooting; Symptom; OTHERS; Specifications

38 Allowed characters Pressing the SELECTOR button in the t direction will select the character on the right and pressing in the 8 direction will select the character on the left. Pressing and holding the button will continu-ously change the character selected. Memo When CAMERA TITLE is set to ON, a...