Page 2 - IMPORTANT SAFEGUARDS; Do not use attachments not recommended by the appliance manu-
IMPORTANT SAFEGUARDS 1. Read all of these instructions.2. Save these instructions for later use.3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners....
Page 5 - When replacement parts are required, be sure the service techni-
18. When replacement parts are required, be sure the service techni- cian has used replacement parts specified by the manufacturer thathave the same characteristics as the original part. Unauthorizedsubstitutions may result in fire, electric shock, or other hazards. 19. Upon completion of any servic...
Page 6 - Safety Precautions; FOR USA AND CANADA; CAUTION; Information for USA
Safety Precautions FOR USA AND CANADA RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE C O V E R ( O R B A C K ) . N O U S E R - S E R V I C E A B L E PA RT SINSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash wish arrowhe...
Page 8 - Features; Camera title setting and display can be made.; INTRODUCTION
2 Thank you for purchasing this product.(These instrustions are for TK-WD310U and TK-WD310E.)Before beginning to operate this unit, please read the instructionmanual carefully in order to make sure that the best possible per-formance is obtained. Features 䡵 Backlight compensation over a wide area is...
Page 9 - EASY INSTALLATION
3 䡲 Before starting an important recording, be sure to perform a testrecording in order to confirm that a normal recording is possible. 䡲 We do not accept liability for the loss of a recording in the case ofit becoming impossible to record due to a problem in the videocamera, VCR or video tape. 䡲 We...
Page 10 - Contents
4 Contents INTRODUCTION Features ............................................................................................. 2Contents ............................................................................................. 4Operating Precautions .................................................
Page 11 - Operating Precautions
5 Operating Precautions ● To save energy, when it is not being used turn the system’s poweroff. ● This camera has been designed for indoor use.When you use it outdoors, be sure to use an appropriate housing. ● Do not install or use the camera in the following places.• In a place exposed to rain or m...
Page 14 - Names and Operations of Parts; Lens mount; Page 22 for instruc-
8 INTRODUCTION Names and Operations of Parts [Front and Bottom] 1 Lens mount For use with CS mount lens.(C-mount lenses require a conversion ring.) 2 Backfocus adjustment ring Adjusting the back focus during lens installation.Please refer to “Back focus adjustment” on 墌 Page 22 for instruc- tions on...
Page 15 - This serves to fix the back focus-adjusting ring.; Camera-mounting bracket; Be sure to use a 6 mm long screw.
9 3 [BF LOCK] Back focus locking screw ( × 2: 2 mm) This serves to fix the back focus-adjusting ring. 4 Camera-mounting bracket The bracket has been attached on the bottom of the camera beforeshipment. It can also be attached on the top according to the cir-cumstance.To re-attach the bracket use the...
Page 16 - To input DC 12V or AC 24V power.; [VIDEO OUT] Video signal output connector; This lamp lights when power is supplied to the camera.
10 Names and Operations of Parts [Rear Panel] SEE INST- RUCTION MANUAL DC12V AC24V 1 2 CLASS 2 ONLY (U TYPE)ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT INT LL SET SELECTOR 8 [DC 12V, AC 24V] Power input terminals To input DC 12V or AC 24V power. 9 [VIDEO OUT] Video signal output connector This BNC ...
Page 17 - E type: 50Hz power region only
11 A [SET] button During normal screen display, pressing and holding this button formore than 2 seconds will display the MENU screen.( 墌 Page 24) During MENU screen display, this button is pressed to display orenable the selected menu item. The input digit will change whenentering the camera title.W...
Page 18 - DC
12 Names and Operations of Parts [Side Panel] COLOR VIDEO CAMERA IRIS DC VIDEO D [VIDEO/DC] Iris Selector Switch This should be set according to the type of lens if an automatic iriscontrol lens is used. VIDEO : In case of lens with EE amp built-in.( 墌 Page 20) DC : In case of lens without EE amp bu...
Page 19 - Basic System; System with up to 8 cameras; S w i t c h e r; CONNECTION/INSTALLATION
13 Basic System 䡵 System with up to 8 cameras REC PLAY FF REW REVERSE PAUSE/STILL REC CHECK STOP/EJECT COUNT/CLOCK TIMEMODE TIMERREC AL/PLRESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.LOCK RESET/CANCEL OPERATE SR-L910 OPE. LOCK • • • • • • COLOR VIDEO CAMERA ALC LEVEL Av Pk L H COLOR VIDEO...
Page 20 - Mounting the lens; Mount the lens according to the procedures described below.
14 Mounting the lens Mount the lens according to the procedures described below. (b) (c) F COLOR VIDEO CAMERA IRIS DC VIDEO 3 4 2 1 IRIS DC VIDEO CONNECTION/INSTALLATION 1. Lens mount 3. 4. Ferrite core 2. 5. 1 3 2 4
Page 22 - Connections on the back
16 Connections on the back ● Turn off the power supply to all components before making con-nections. SEE INST- RUCTION MANUAL DC12V AC24V 1 2 CLASS 2 ONLY (U TYPE)ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT INT LL SET SELECTOR 䡵 Video signal cable (BNC) Connect the coaxial cables (BNC) to the VIDEO...
Page 23 - Maximum extension; Memo
17 䡵 Power supply (DC 12 V or AC 24 V) Connect the DC 12 V or the AC 24 V power supply to the DC 12V/AC 24V terminals. To prevent connection errors or a cable discon-nection, we recommend the use of lug plates for the connections.The following table shows the connection distances and connectioncable...
Page 24 - mm; Mounting the camera
18 MAX. 7 mm CONNECTION/INSTALLATION Camera mountingscrew hole Camera mountingbracket Rotation prevention hole Mounting the camera When mounting the camera on a fixer, pan/tilt, etc., use the cameramounting screw hole located on the camera-mounting bracket. CAUTION: Use the screw with a length short...
Page 25 - Fall Prevention
19 SEE INST- RUCTION MANUAL DC12V AC24V 1 2 CLASS 2 ONLY (U TYPE)ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT INT LL SET 2mm 6mm M3 × 6 SELECTOR Fall Prevention • Exercise maximum caution when installing the unit to the wall orceiling. You should not engage in the installation work yourself. Aska pr...
Page 26 - Auto iris lens adjustment; Page 33 “WHITE BALANCE”
20 CONNECTION/INSTALLATION Auto iris lens adjustment Connect the camera according to the connection method, turn it on,display an image on the monitor, and check the image. The white bal-ance adjustment mode is selected. 墌 Page 33 “WHITE BALANCE” The camera has been factory-adjusted to the best posi...
Page 27 - Too bright
21 • LEVEL adjustment Monitor screen LEVEL turning direction Too bright Counterclockwise (Toward L) Too dark Clockwise (Toward H) Memo ● If the sensitivity adjustment LEVEL is turned excessively to L,the sensitivity increases because of the AGC function of thecamera, and the image looks grainy. ● At...
Page 28 - Back focus adjustment
22 CONNECTION/INSTALLATION Back focus adjustment Be sure to make back-focus adjustments when changing the lens mount-ing method or using a different lens. ● To make accurate back focus adjustments, carry out adjustments ina state where the lens iris is released.To open the lens iris, set MODE in the...
Page 30 - MENU SETTING; Menu settings; The MENU screen appears.; Operation
24 MENU SETTING Menu settings SEE INST- RUCTION MANUAL DC12V AC24V 1 2 CLASS 2 ONLY (U TYPE)ISOLATED POWER ONLY (E TYPE) POWER VIDEO OUT INT LL SET SELECTOR SELECTORbutton SET button 1. Press and hold the SET button formore than 2 seconds. ● The MENU screen appears. 2. Press the SELECTOR button inth...
Page 32 - Menu tree; The menu screens are structured as shown below.
26 MENU SETTING Menu tree The menu screens are structured as shown below. V I D E O A D J U S T . . F O C U S A D J U S T . . C A M E R A S E T T N G S I . . F A C TE X I T O R Y S E T T N G S I . . ME N U W D R A G C C O L O R L E V E L E N H A N C EE X I T E X I T L E V E L M O D E M O D E J U S T...
Page 34 - VIDEO ADJUST screen; Default setting: MODE2
28 MENU SETTING VIDEO ADJUST screen WDR MODE Default setting: MODE2 Setting of the wide dynamic range (WDR) is performed.CUSTOM : Manually adjusts the wide dynamic range. Pressing the SET button will display the WDR CUSTOMSETTINGS screen. ( Page 30) MODE1 : When shooting in a bright area outdoors MO...
Page 35 - WDR CUSTOM SETTINGS screen
29 1. D i s p l a y t h e V I D E O A D J U S Tscreen. ( Page 24) 2. Select WDR MODE and press theSELECTOR button in the horizon-tal direction ( 8 or t ) to change the setting to CUSTOM. 3. Press the SET button. ● T h e W D R C U S TO M S E T-TINGS screen will appear. 4. Press the SELECTOR button in...
Page 36 - WDR BIAS
30 Item Content WDR BIAS Sets the low/mid luminance level of the WideDynamic Range ● To brighten video with low/mid luminance:Increase the value ● To darken video with low/mid luminance:Decrease the value [Setting range: -36 ~ -8 ~ 36] WDR LIMIT Sets the maximum value of the Wide DynamicRange ● To s...
Page 37 - AGC MODE
31 AGC MODE Default setting: LOW Sets the maximum gain of AGC (Auto Gain Control).You can set this device to maximum gain by the use of the slow shutter.Refer to the chart below and set according to the subject. Setting : Gain Setting Gain : Slow-speed shutter OFF LOW MID HIGH HIGH ( × 2) HIGH ( × 4...
Page 38 - When in a dark area and setting AGC MODE to HIGH (
32 Memo ● When raising the gain, noise will appear in the screen for darkareas. ● When in a dark area and setting AGC MODE to HIGH ( × 2) and up:• Video may temporarily lock or noise may be noticeable.• The entire screen may temporarily change from a dark to a bright state. • When especially dark, d...
Page 39 - WHITE BALANCE; : The unit will be in the Auto Tracking White Balance mode.
33 VIDEO ADJUST screen (continued) WHITE BALANCE Default setting: ATW The white balance adjustment mode is selected. White balance can beadjusted for lighting with color temperature in the range between 2,500Kand 10,000K.ATW : The unit will be in the Auto Tracking White Balance mode. The white balan...
Page 40 - MANUAL WHITE BALANCE screen; Preparation
34 MANUAL WHITE BALANCE screen If the entire screen appears to be reddish or bluish in color as the resultof automatic white balance adjustment, manually adjust the white bal-ance. Fill the entire screen with a white sub-ject (such as paper, cloth, etc.). 1. D i s p l a y t h e V I D E O A D J U S T...
Page 41 - or; COLOR LEVEL; The color level of video signals is adjusted.; ENHANCE LEVEL; Default setting: NORMAL; CAMERA SETTINGS screen; This setting is performed when using the DC auto iris lens.
35 MENU SETTING D O F F S L — — — — — — E N S A D J U S T E T 1 2 0 1 0 0 1 5 0 C E X I T D G I A N 6 0 0 2 5 5 C 1. Display the CAMERA SETTINGSscreen. ( Page 24) 2. Select LENS ADJUST and pressthe SET button. ● The LENS ADJUST screen ap-pears. 3. Press the SELECTOR button inthe vertical direction (...
Page 42 - DC GAIN; CAMERA TITLE
36 Item Content DC GAIN Adjusts operating speed of the DC auto iris lens.Adjust according to the lens used.Increasing the value: the speed will increase[Setting range: 0 ~ 60 (default setting) ~ 255] * Depending on the lens, hunching may occurwhen setting this value too high. In this case,lower the ...
Page 43 - CAMERA TITLE EDIT screen
37 1. Display the CAMERA SETTINGSscreen. ( 墌 Page 24) 2. Press the SELECTOR button inthe vertical direction ( 6 or 7 ) and move the cursor (>) to se-lect CAMERA TITLE EDIT. 3. Press the SET button. ● The 1st character will appearin purple and input will be al-lowed. 4. Press the SELECTOR button i...
Page 44 - Allowed characters; Pressing the SELECTOR button in the
38 䡵 Allowed characters Pressing the SELECTOR button in the t direction will select the character on the right and pressing in the 8 direction will select the character on the left. Pressing and holding the button will continu-ously change the character selected. Memo When CAMERA TITLE is set to ON,...
Page 45 - FACTORY SETTINGS screen; Returns set values to their factory settings.
39 MENU SETTING FACTORY SETTINGS screen Returns set values to their factory settings. 1. D i s p l a y t h e FA C TO RY S E T-TINGS screen. ( 墌 Page 24) 2. Press the SELECTOR button inthe vertical direction ( 6 or 7 ) a n d m o v e t h e c u r s o r ( > ) t oCLEAR. 3. Press the SET button. ● Sett...
Page 46 - Troubleshooting; OTHERS; Symptom; The auto iris will not operate
40 Troubleshooting OTHERS Symptom Remedy The operation becomes un-stable The auto iris will not operate There is noise in the screenor increase in residual im-ages The colors of the screen arenot natural White balance adjustedautomatically/manuallycannot be used The camera title will not ap-pear The...
Page 47 - Specifications
41 OTHERS Specifications Image pickup device : 1/3 type WDR digital image device Number of effective pixeis : 380,000 pixels ((H) 720 × (V) 540) Synchronizaton method : Internal,Line lock Scanning frequency : U Type (H) 15.734 kHz, (V) 59.94 Hz E type (H) 15.625 kHz, (V) 50.0 Hz Resolution : 480 TV ...
Page 48 - TK-WD310 COLOR VIDEO CAMERA
VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand LWT0181-001B-H © 2004 VICTOR COMPANY OF JAPAN, LIMITED is a registered trademark owned by VICTOR COMPANY OF JAPAN, LTD. is a registered trademark in Japan, the U.S.A., the U.K. and other countries. TK-WD310 COLOR VIDEO CAMERA
JVC RV-NB20B
User Manual
JVC HX-Z30
User Manual
JVC MX-GT80
User Manual
JVC AV-48WP30
Manual
JVC HR-S3911U
User Manual
JVC HD-52Z575
Manual
JVC AV-27F702
Manual
JVC GR-DV500U
User Manual
JVC HR-A591U
User Manual
JVC AV-36320
Manual
JVC XV-S200BK
Manual
JVC SP-EXA1
User Manual
JVC AV-36D303
Manual
JVC FS-SD770
User Manual
JVC AV-56WP74
User Manual