JVC TK-C925U - Manuals - manualsarea.com

Page 2 - IMPORTANT SAFEGUARDS; FOR USA; c. If the appliance has been exposed to rain or water.

2 1. Read all of these instructions. 2. Save these instructions for later use. 3. 4. 5. 6. 7. 8. 9. 10. IMPORTANT SAFEGUARDS PORTABLE CART WARNING (symbol provided by RETAC) S3125A Unplug this appliance system from the wall outlet before cleaning. Donot use liquid cleaners or aerosol cleaners. Use a...

Page 3 - Introduction; Safety Precautions; FOR USA AND CANADA; RISK OF ELECTRIC SHOCK; CAUTION; Cet apparéil numerique de la Classe B est; conforme; INFORMATION FOR USA; CAUTION

4 Introduction Safety Precautions FOR USA AND CANADA The lightning flash wish arrowhead symbol, within anequilateral triangle isintended to alert the user to thepresence of uninsulated "dangerous voltage" within theproduct's enclosure thatmay be of sufficient magnitude toconstitute a risk of...

Page 4 - Information for Users on Disposal of Old Equipment; f you wish to dispose of this product, please do so in accordance; POWER SYSTEM; Sehr geehrter Kunde, sehr geehrte Kundin,

6 Introduction Safety Precautions (continued) Information for Users on Disposal of Old Equipment Attention: [European Union] This symbol indicates that the electrical and electronic equipmentshould not be disposed as general household waste at its end-of-life. Instead, the product should be handed o...

Page 5 - Features; : Indicates reference data regarding limitations on functions,; Contents

8 Introduction Thank you for purchasing this product.(These instructions are for TK-C1530U/E and TK-C1531EG.)Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained. 䡵 Realizing a High Picture Quality Th...

Page 6 - Operating Precautions; Others

10 Introduction Storage and Location of Use 䢇 This camera has been designed for indoor use. When you use it outdoors, be sure to use a housing or the like. 䢇 Do not install or use the camera in the following places. ● In a place exposed to rain or moisture. ● In a place with vapor or oil, for exampl...

Page 7 - Back focus adjustment ring; Name of Parts and their Functions; Rotation-preventive hole

12 Introduction Front/Bottom/Side panel A Back focus adjustment ring This ring switches between back focus adjustment and lens mounting method.When adjustment is required, loosen the back focus fastening screw J by turning it anti-clockwise. After the adjustment, tighten the fastening screw by turni...

Page 8 - Name of Parts and their Functions (continued); ] Control signal connection terminal; Press the SELECTOR switch up (

14 Introduction Back panel Name of Parts and their Functions (continued) CLASS 2 ONLY(U TYPE) ISOLATED POWER ONLY(E TYPE) SEE INSTRUCTION MANUAL POWER VIDEO OUT SELECTOR SET MENU INT LL ON RX TERM-OFF + ‑ 1 2 DC12V d AC24V H SEE INSTRUCTION MANUAL POWER VIDEO OUT SELECTOR SET MENU INT LL ON RX TERM-...

Page 9 - Mounting Screw for Fall Prevention Wire; Setup; System Example

16 Introduction Q [RX TERM-OFF,ON/INT,LL] Function Selector Switch 䢇 [RX TERM-OFF,ON] RX Signal Terminal ON/OFF Switch This sets whether or not the signal between RX+ and RX- from the control signal connection terminals L should be terminated at the value of 110 K resistance. ON : Terminated at 110 ...

Page 10 - Turn ON the power of the camera to be checked.; Confirm that; Flow for Connection/Settings; Connecting the back panel (; Mount the camera to the mounting location.; Adjusting the back focus (; Adjust the back focus.; Adjusting the auto white balance (

18 Setup Memo: ● When controlling this camera with any system except the RM-P2580E, perform proper settings using switches and menu screens according to the system used. System Example (continued) Precautions when using RM-P2580E: When operating a system using the RM-P2580E, several cameras (up to 1...

Page 11 - Mounting the lens; pin plug

20 Setup Mounting the lens (a) (b) F 1 3 2 4 4 1 2 IRIS VIDEO DC LEVEL COLOR VIDEO CAMERA 3 4 2 1 3 VIDEO DC 4 pin plug 21 1. Check the mounting method of the lens before mounting ● This camera is set to CS-mount lens before shipment. To use a C-mount lens, loosen the back focus fastening screw with...

Page 12 - Connecting the back panel; To the terminal of infrared illumination device etc.(; Video signal coaxial cable; Connect in pairs like this.

22 Setup Connecting the power cable 䡵 TK-C1530 /TK-C925 (AC24 V or DC12 V) Connect the AC 24 V or the DC 12 V power cord to the power input terminal. To prevent connection errors or a cable disconnection, we recommend the use of lug plates. The following table shows the connection distances when 2-c...

Page 13 - Alarm input terminal; Do not supply voltage.; Alarm output terminal; Connect to alarm devices such as alarm, indicator, light or buzzer.; IN; length. It may damage the internal parts.; Mounting the camera

24 Setup Connecting alarm input/output terminal 䡵 Alarm input terminal Connect infrared sensor, door sensor, metal sensor or sensor of manual switch and the like. ● To prevent noise from entering the internal circuit, supply non-voltage setting signal. ● Do not supply voltage. ● Can be set via menu ...

Page 14 - The camera-mounting bracket is removed from the camera.; Mounting the camera-mounting bracket on top of the camera; To mount the camera-mounting bracket on top of the camera, use the; Fall Prevention; Fall Prevention Wire; Precautions regarding fall prevention

26 Setup Mounting the camera-mounting bracket on top of the camera The camera-mounting bracket is originally mounted at the bottom of the camera before shipment but it can also be mounted on top of the camera. Mounting the camera (continued) IRIS VIDEO DC LEVEL COLOR VIDEO 1 2 3 Camera-mounting brac...

Page 15 - Adjusting the back focus; With a fixed-focus lens; Turn the lens focus ring to; With a zoom lens; Repeat steps 3 and 4 two or three times.

28 Setup This camera is adjusted to a optimum wide range for CS-mount lens before shipment but readjustment is required when using zoom lens or C-mount lens or when the lens focus ring is out of focus. Use the following methods to adjust the back focus. Adjusting the back focus Back focus adjustment...

Page 16 - Adjusting the lens; LEVEL adjustment

30 Setup After the connection is complete, turn on the camera, display an image on the monitor and check the video image.In the case of an automatic iris control lens, the camera has been factory-adjusted to the best position, but it may need to be adjusted according to the condition of the object o...

Page 17 - Adjusting the auto white balance; SET button; Error display; Object error; Press the SET button for approx. one second.

32 Setup Each light source has its own color temperature. Therefore, when the main light source lighting an object is changed, press the SET button for a while and adjust the white balance again. Adjusting the auto white balance AWC OK AWC ERROR : HIGH LIGHT AWC ERROR:NG OBJECT AWC OPERATION AWC ERR...

Page 19 - Setting; The flow of menu screen; COLOUR is displa

36 Setting The flow of menu screen MAIN MENU CAMERA TITLE EDIT W .BALANCE SHUTTER GAIN B&W/COLOR Z BLC MODE IRIS MODE S .E.C . W .BALANCE ADJUST AW C EXECUTE AU X MODE INPUT POLARITY MODE MANU AL SPEED AU TO LIMIT MODE MAX GAIN FIX GAIN AW C SET R GAIN B GAIN AU X FUNCTION TITLE/VIDEO W hen A AW...

Page 20 - AUX FUNCTION screen

38 Setting AUX FUNCTION screen Item Functions and settings AUX MODE This item sets the signal input or output of the AUX terminal. B&W OUT : A signal is output when the camera switches to B&W or Color mode. SCENE IN : Depending on the input signal of the AUX terminal, the camera can switch b...

Page 23 - AUX MODE setting; “COLOR” display differs depending on the model.; “COLOR” is displayed for

44 Setting TITLE/VIDEO screen (continued) Item Functions and settings This item sets the mode switching of B&W and Color. Memo: ● When switching the Color mode to B&W mode, the type of light source may cause the focus to be dislocated. This is because the B&W mode is sensitive to both vi...

Page 25 - Functions and settings; DISPLAY screen

48 Setting TITLE/VIDEO screen (continued) Item Functions and settings BLC MODE Sets the backlight compensation function. Set this item when there is a bright light source in the background of the object and the object becomes dark in the automatic iris function. Set such that unnecessary light sourc...

Page 26 - PRIVATE MASK screen; Screen display when power is switched on; TT; COMMUNICATION screen; Item; Monitor screen

50 Setting PRIVATE MASK screen Item Functions and settings MASK No.1 MASK No.2 MASK No.3 MASK No.4 This function masks par ts of an image in gray display such that the masked par ts will not be shown on the screen.Select A ON B and press the SET button. The MASK EDIT screen appears and mask settings...

Page 27 - MAINTENANCE screen; FACTORY SETTING screen

52 Setting White spots may appear on the screen due to changes in properties with time.This is a general characteristic of CCDs. This camera has a built-in white spot compensation function to reduce these white spots. MAINTENANCE screen Item Functions and settings CCD SPOT SCAN CANCEL : No white spo...

Page 28 - Detailed setting; A title can be selected for each camera. (Maximum 24 characters); Camera title setting; The selected character is displayed flashing on and off.

54 Detailed setting A title can be selected for each camera. (Maximum 24 characters) 1. Select the item CAMERA TITLE EDIT on the TITLE/VIDEO screen and press the SET button. The CAMERA TITLE EDIT screen is displayed.The first character from the character area flashes on and off and is ready for inpu...

Page 30 - Main menu screen

58 Detailed setting It is possible to output B&W/Color switching signal from the AUX terminal on the back of this camera.B&W/Color switching signal is output by setting both the AUX MODE and B&W/COLOR items. 䡵 Set the AUX MODE item to A B&W OUT B 1. Select the item AUX FUNCTION on th...

Page 31 - Control by B&W/Color switching signal from external; Select the item AUX MODE on the AUX FUNCTION screen.

60 Detailed setting You can use the switching signal from an external control device to link the B&W/Color switching or near-infrared illumination of this camera.Consult your nearby JVC’s dealer on the connecting devices.Example)AUX MODE : IR IN INPUT POLARITY : In the case of MAKE ( A Pg. 38) C...

Page 32 - Private mask setting; PRIVATE MASK EDIT screen

62 Detailed setting Perform private mask setting to mask images that you do not want to be shown on the screen in gray.You can set 4 locations in the display screen. 䡵 Selection of mask number 1. Select the item PRIVATE MASK on the main menu screen and press the SET button. The PRIVATE MASK screen i...

Page 33 - Switching day/night video settings with the scene file function; INPUT POLARITY; Scene file function; MAKE signal; MAX GAIN; Items that are saved in scene files

64 Detailed setting This camera has 4 types of scene files (SCENE A to SCENE D) for detailed video settings according to the shooting condition of the object.Scene files can be switched using AUX terminal input (SCENE A, SCENE B only) or external communication (SCENE A to SCENE D). 䡵 Switching day/n...

Page 34 - Color imaging method; Specifications; Lens Mount

66 Others 䡵 Camera Signaling method TK-C1530U /TK-C925U : NTSC TK-C1530E/TK-C1531EG /TK-C925E/TK-C926EG : PAL Image pickup device : 1/3 type IT CCD Color imaging method : Single color-difference line sequential system, 2:1 interlace Imaging area : 4.8 mm (H) ⳯ 3.6 mm (V), (diagonal 6 mm) Scanning fr...