JVC TK-C215V4U - Manuals

JVC TK-C215V4U – Manual in PDF format online.

Manuals:

Manual

Manual JVC TK-C215V4U

Summary

Page 2 - Introduction; Safety Precautions; CAUTION; FOR USA AND CANADA

2 Introduction Safety Precautions CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS I N S I D E . R E F E R S E R V I C I N G T O QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION FOR USA AND CANADA Information for Users on D...

Page 3 - Reorient or relocate the receiving antenna.

3 I 䢇 The unit is to be powered by a DC 12 V or an AC 24 V power supply. 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V power supply. 䢇 The AC 24 V and 12 V DC power supply shall conform to the following: Class 2 only . 䢇 This installation should be made by a qualified service pers...

Page 4 - Read all of these instructions.; IMPORTANT SAFEGUARDS

4 Introduction These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system...

Page 5 - Characteristics; How to Use This Manual; : Points to pay attention to during; NOTE; and

5 Thank you for purchasing this product.(These instructions are for: TK-C215V4U.)Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained. 䡵 Realizing a High Picture Quality This camera realizes 540 TV li...

Page 6 - Contents

6 Introduction Introduction Safety Precautions ......................................... 2Characteristics ............................................... 5Contents ......................................................... 6Operating Precautions ................................... 7Name of Parts .......

Page 7 - Operating Precautions

7 䢇 To save energy, when it is not being used turn the system’s power off. 䢇 This camera has been designed for indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the following places. ● In a place exposed to rain or moisture. ● In a place with vapor or oil soot, for exampl...

Page 8 - Camera; Use these when mounting the camera to the; Name of Parts

8 Introduction Camera A Mounting hole (elliptical) x 4 Use these when mounting the camera to the NOTE: electrical box. ( A pg. 18) When installing the camera onto the electric box, install it using the supplied adaptor ring. B Mounting hole (round) x 4 Use these when mounting the camera to the ceili...

Page 10 - adjustment button

10 Introduction Set the video setting switches on the camera unit before mounting it.To set the switches, use a fine-tipped screwdriver. A [RESET/SPOT] RESET/SPOT button When this button is pressed, the value of the white balance or phase adjusted manually is reset to the default value. ● When the 2...

Page 12 - Installation and connection; * Be sure to turn off the power of devices before; Video signal cables; The product shall be powered by Class 2 only.; About Connection Cables

12 Installation and connection The maximum connection distance varies with the type of cable used. Please refer carefully to the table for each cable during connection. * Be sure to turn off the power of devices before connecting cables. Video signal cables Connect the coaxial cables (BNC) to the vi...

Page 13 - Getting Started; Embedded Cover in Ceiling (recess bracket); Selecting a mounting method; System diagram; Mounting the Camera

13 NOTE: ● Turn OFF the power supply to all equipment to be used before making connections. ● Read the Instruction Manual for each piece of equipment to be used before making connections. Getting Started CAUTION: ● When mounting the camera to the ceiling, ensure to wear safety glasses to protect the...

Page 14 - Embedding the camera to the ceiling; * Make use of a ceiling material with a thickness; Setup; not larger than; Remove the dome cover.

14 Installation and connection Embedding the camera to the ceiling * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm, 4 3/4 inches) 2. Draw the fall prevention wire mounted to the ceiling slab and the cable out from the ceili...

Page 15 - Connecting; Wrap insulation tape around cables.; Mounting; Align; in the clockwise; Adjusting Images

15 䡵 Connecting 1. Attach the fall prevention wire to the camera, followed by attaching it to the ceiling slab (Fall prevention wire is not included.) 2. Connect the video signal cable. ( A pg. 12) Lower the cover and connect the connectors.Upon connecting, cover the connectors using the protection ...

Page 16 - Make use of the template supplied to open a hole.; Do not use flathead screws.

16 Installation and connection When mounting the camera directly to the ceiling or on the wall When mounting to a wall, replace areas indicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm, 1 1/8 inches) Make use of the template supplied to open a hole. ...

Page 17 - When doing so, ensure that the

17 4. Connect the video signal cable. ( A pg. 12) Lower the protection cover and connect the connectors. Upon connecting, restore the protection cover to cover the connectors. 5. Connect the input power supply cable. ( A pg. 12) 6. Wrap insulation tape around cables. 䡵 Mounting 1. Align the position...

Page 19 - Adjusting Image; Mounting the test monitor; when adjustments are performed.; Adjusting the camera direction; Pan rotation of ±175

19 Adjusting Image Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and focus.* The power to the camera body must be ON when adjustme...

Page 20 - Adjusting field angle

20 Adjusting Image Adjusting the field angle/focus/brightness Upon determining the imaging direction, adjust the field angle, focus and iris level accordingly.The method of adjustment varies with the camera in use. Adjusting field angle Loosen the fastening screw for the zoom adjustment ring and mov...

Page 21 - After setting is complete, mount the Inner dome.; Mount the inner dome .; After setting is complete, mount the dome cover.; Mount the dome cover.; Maximum correction: 32; Mounting the Inner Dome; White-spot correction

21 After setting is complete, mount the Inner dome. 1. Mount the inner dome . Mount the inner dome to the claws (3 locations). CAUTION: ● Mount the inner dome such that it does not cover the lens. ● When mounting the inner dome, be careful not to move the lens position. The image angle set previousl...

Page 22 - Others; Specifications

22 Others 䡵 Camera Signal system : Based on NTSC standard Scanning frequencies : 15.734 kHz (Horizontal), 59.94 Hz (Vertical) Image device: 1/4" IT CCD Effective picture elements: : 380,000 pixels, 768 (H) x 494 (V) Sync system : Line lock/Internal Video S/N: 50 dB (AGC OFF, white 50 % output) H...

Page 23 - Focus chart

23 Focus chart TK-C215V4_EN.book Page 23 Wednesday, June 14, 2006 8:00 PM