JVC TK-C1431 - Manuals

JVC TK-C1431 – Manual in PDF format online.

Manuals:

Manual

Manual JVC TK-C1431

Summary

Page 2 - IMPORTANT SAFEGUARDS; liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

E-2 IMPORTANT SAFEGUARDS PORTABLE CART WARNING (symbol provided by RETAC) S3125A 1. Read all of these instructions.2. Save these instructions for later use.3. All warnings on the product and in the operating instructions should be adhered to.4. Unplug this appliance system from the wall outlet befor...

Page 3 - Safety Precautions; CONTENTS; INTRODUCTION

E-4 WARNING:TO REDUCE THE RISK OF FIRE ORE L E C T R I C S H O C K , D O N OTEXPOSE THIS APPLIANCE TO RAINOR MOISTURE. Due to design modifications, data given in thisinstruction book are subject to possible changewithout prior notice. AVERTISSEMENT:P O U R E V I T E R L E S R I S Q U E SD ’ I N C E ...

Page 4 - Features; Operating Precautions

E-6 A DSP (Digital Signal Processor) featuresa Extended Dynamic Range (ExDR) andenables to shoot both bright and darklocations. The use of a CCD with a SENSE UP (X32)function realized the minimum luminousflux density for subject of 0.9 lx (F1.2,50%, AGC 20dB) and 0.03 lx (at SENSEUP (X32)). Fur ther...

Page 5 - Lens mount; b y t u r n i n g i t; Camera-mounting bracket; Be sure to use a 6 mm long screw.; Controls, Connectors and Indicators; Cover

E-8 INTRODUCTION 1 Lens mount To attach the lens.This is applicable to both C-mount lensesand CS-mount lenses. 2 Back focus adjustment ring Adjusting the back focus dur ing lensinstallation.When readjustment is required, loosent h e l o c k i n g s c r e w 3 b y t u r n i n g i t counterclockwise an...

Page 6 - right Button; terminates at 75; NOT USED; To input DC 12V or AC 24V power.; signal connection terminals; ON the EXT.TERM switch

E-10 INTRODUCTION 13 [ , , , ] Up-and-down, left-and- right Button These buttons select items on the menuscreen and change a set value.( Page 23) 14 [EXT.TERM-ON/OFF] Terminal On/OffSwitch of External SynchronizationSignal This is a terminating ON/OFF switch forthe external synchronization input sig...

Page 7 - VIDEO CASSETTE RECORDER; CONNECTION/INSTALLATION; System with up to 8 cameras; MEMO; A B C D; Connecting the control signal cable; Setting on the MENU screen (; MACHINE ID setting switches; When connecting

E-12 REC PLAY FF REW REVERSE PAUSE/ STILL REC CHECK STOP/EJECT COUNT/CLOCK TIMEMODE TIMER REC AL/PLRESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.LOCK RESET /CANCEL OPERATE SR-L910 OPE. LOCK 1 TO CAMERA TO CAMERA DATA I / O DATA I / O RX RX+ RX RX- TX TX+ TX TX- COM COM 1 2 3 4 5 6 7 8 COM ...

Page 8 - Procedures

E-14 CONNECTION/INSTALLATION SET MENU CAMERA SETUP EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF IOT USED ON LLSIMPLEXON VIDEO DC DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLA TED PO WER ONL Y (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B C D SEE INST- RUCTION MANUAL 1 + - 2 Execute co...

Page 9 - Connections on the back; Power supply; Installing the ferrite core; cable around the ferrite core.; Control signal cables; • Genlocking is not possible with a signal con-

E-16 DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLA TED PO WER ONL Y (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B C D SEE INST- RUCTION MANUAL 1 + - 2 Connect the DC 12 V or the AC 24 V powersupply to the DC 12V/AC 24V terminals. Top r eve n t c o n n e c t i o n e r r o r s o r...

Page 10 - Mounting the camera; Fall Prevention; Installation of camera

E-18 DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLA TED POWER ONL Y (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B C D SEE IN ST- RUCTION MANUA L + - 1 2 2mm 6mm M3 x 6mm MAX. 7 mm Mounting the camera CONNECTION/INSTALLATION Camera mountingscrew hole Camera-mounting bracket Rotati...

Page 11 - Lens adjustment; Monitor screen; Back focus adjustment

E-20 CONNECTION/INSTALLATION Lens adjustment ALC LEVEL Av Pk L H Connect the camera according to the connection method, turn it on, display an image on themonitor, and check the image. The camera has been factory-adjusted to the best position, butit may need to be adjusted according to the object co...

Page 12 - Auto white balance control adjustment; Error message display; MENU SETTING; Setting the menu; The MENU screen is displayed.

E-22 CONNECTION/INSTALLATION Auto white balance control adjustment Each light source has its own colour temperature. Therefore, when the main light sourcelighting an object is changed, the white balance should be adjusted again by pressing theAWC button. 1. Place a white object under the samelightin...

Page 13 - The flow of menu screen

E-24 MENU SETTING The flow of menu screen Page 26 Page 31 Page 34 Page 37 Page 39 ME N U S Y N C A D J U S T V I D E O A D J U S TMOD E E S L E C T A L C S E T T I NGS C OMMUN I C AT I ON MA I NT E N A NCE MOT I ON D E T E CT S Y NC D A J U S T V P HA S E H P HA S ES C E COARS S C F I NE DE V I O AD...

Page 14 - SYNC ADJUST Screen

E-26 Item Functions and set values Initial value V PHASE H PHASE SC COARSE SC FINE This adjusts the vertical synchronization to those of other cameraswhen a selector switch for the synchronizing system on the sideis at LL. (50Hz power region only.)When it is not set to LL, “---” will appear, disabli...

Page 16 - NORMAL: Switches to B&W mode when the signal level of; VIDEO ADJUST Screen

E-30 ALC SETTINGS Screen (Continued) MENU SETTING Item Functions and set values Initial value B&W COLOURMODE .. B&W AUTOLEVEL This function sets the colour modes to colour or B&W.When switching the mode between “colour’’ and “B&W”is carried out, the focus may be dislocated. In such a...

Page 17 - MODE SELECT Screen

E-32 MODE SELECT Screen Titles, image reversion, etc., are set. Item Functions and set values Initial value CAMERATITLE EDIT REVERSEMODE HLI MODE ALM.TITLESIZE ALARMCOLOUR – OFF OFF DOUBLE WHITE A L A R M A L A R M NORMAL DOUBLE Bring up the CAMERA TITLE, EDIT screen.( Page 38) Settings are executed...

Page 18 - MOTION DETECT Screen; DEMONSTRATION; COMMUNICATION Screen

E-34 MENU SETTING MOTION DETECT Screen Item Functions and set values Initial value MODE Settings are executed about the motion detecting function that emits alarm signals whenthere exists any motion in the image. Alarm signals are output from the auxiliary terminals onthe back. This sets ON/OFF of m...

Page 19 - BLC EDITTING Screen; Press the SET button.; Manual Adjustment of White Balance

E-36 BLC EDITTING Screen MENU SETTING It is possible to set freely the light metering area for backlight compensation. The 2 screensof EDIT1 and EDIT2 can be set. CAMERA SETUP SET MENU AWC L A C S E T T I N GS I I R S L E V E L NORMAL A E V R A GE : P E AK 8 2 : S U T H T E R E x DR / N RMAL O P I O...

Page 20 - The screen returns to MODE SELECT.; CAMERA TITLE Setting; Setting the MOTION DETECT Function; The setting screen is brought up.; • Indicated positions on the screen are rough

E-38 1. Select the item CAMERA TITLEon the MODE SELECT screen,and push the SET button. Then, the CAMERA TITLE screen isbrought up. 2. Select the first character from thecharacter area using buttons. The selected character is displayedflashing on and off. 3. Push the SET button. The first character g...

Page 21 - Output of Black-White/Colour switching signal; Set the AUX TERMINAL Item to; Control by Black-White/Colour switching signal from the outside

E-40 MODE S E L E C T C AME R A T I T L E E D I TR E V E R S E MOD E OF F A L M . T I T L E S Z E I D OUBLE A L A RM COL OU R WH I T E A U X T E R M I N A L (B&W IN) D . Z O O M M A X x2 H L I M O D E O F F . . Output of Black-White/Colour switching signal It is possible to output black-white/co...

Page 22 - White spot compensation; Operation method; Attach a lens cap or similar.; Power supply and power consumption: TK-C1430E; Specifications; OTHERS

E-42 White spot compensation CCDs have the general characteristic that white spots appear on the screen when the CCD isoperated at high temperatures or when they are used with a slow shutter speed.This unit has a built-in white spot compensation function to reduce these white spots.(The number and t...