JVC TD-W254 - Manuals - manualsarea.com

Page 3 - * Dolby noise reduction and HX Pro headroom extension; CAUTIONS

INTRODUCTION Thank you for purchasing a JVC product. Read this instructionbook carefully before operating to be sure of getting optimumperformance and longer service life from the unit. CONTENTS Features .................................................................................... 3Cautions ....

Page 5 - CONNECTIONS; Remote cable connection for COMPU LINK; CASSETTE LOADING; Notes for the B version:; Stereo amplifier

CONNECTIONS • Do not switch the power on until all the connections are com-pleted. • Insert the plugs firmly, or poor contact will result, causingnoise. • When the pin-plug cords are employed, always connect thewhite plug to the left channel terminal. This helps to avoidreversed connections. • When ...

Page 6 - NAMES OF PARTS AND THEIR FUNCTIONS; ON

NAMES OF PARTS AND THEIR FUNCTIONS 1 POWER switch ( ON OFF) (B version) POWER switch (On/Standby) (J version) 2 switch (STANDBY/ON) (B version) 3 Cassette holder (deck A) 4 Cassette operation buttons (deck A) : Press to wind the tape quickly from right to left. : Press to wind the tape quickly from ...

Page 7 - AUTO REVERSE OPERATION

t INPUT LEVEL control y Cassette operation buttons (deck B) : Press to wind the tape quickly from right to left. : Press to wind the tape quickly from left to right. (stop) : Press to stop the tape. Also press to stop both decks simulta-neously during dubbing. PLAY : Press to start playback/recordin...

Page 8 - RECORDING; RECORDING LEVEL ADJUSTMENT

RECORDING Deck B onlyOperate in the order of the numbers in the illustration. • Make sure the safety tab of the cassette has not been brokenoff. 1 Turn the power on. 2 Load a cassette for recording. 3 Set the DOLBY NR switch as required. 4 Set the REVERSE MODE switch as desired. 5 Select the side to...

Page 9 - COMPU LINK CONTROL SYSTEM

AUTOMATIC RECORD MUTING (DECK B) This facility is used to eliminate undesired sections and leave anappropriate non-recorded section. A. To leave non-recorded sections of about 4–5 seconds automatically1. When the undesired section comes during recording, press the REC/REC MUTE button and release it....

Page 10 - DUBBING

Automatic Source Selection (COMPU LINK-1, 3)When the provided remote cables are used for connecting thisunit to other components which have COMPU LINK-1 or3/SYNCHRO terminals, the switch-over of all system compo-nents is possible with simple one-touch of the source selectorbutton of JVC’s amplifier ...

Page 11 - MAINTENANCE; Cleaning the heads, pinch roller and capstan; TROUBLESHOOTING; Previous recording is not completely erased.

Tape editing1. Press the REC/REC MUTE button when finished dubbing a tune. Deck B automatically enters the record muting modeand leaves a non-recorded section of about 4-seconds thenenters the record-paused mode. 2. Press the (stop) button of deck A and search for the next tune you want by using the...

Page 12 - SPECIFICATIONS

SPECIFICATIONS Type : Double cassette deck Track system : 4-track, 2-channel Tape speed : 4.8 cm/sec (1-7/8 inch/sec) (Normal) 9.5 cm/sec (3-3/4 inch/sec) (High) Frequency : (–20 dB recording) response Type IV tape ;20–17,000 Hz 30–16,000 Hz (±3dB) Type II tape ; 20–16,000 Hz 30–15,000 Hz (±3dB) Typ...