JVC RX-DP9VBK - Manuals - manualsarea.com

Page 2 - Warnings, Cautions and Others; Do not expose this appliance to rain or moisture.; CAUTION; Cautio ––; Disconnect the mains plug to shut the power off completely. The

G-1 Warnings, Cautions and Others CAUTIONTo reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE...

Page 4 - Table of Contents; Setting the Surround Sound Output—SURROUND; TEXT COMPU LINK Remote Control System .. 48

1 Table of Contents Introduction ................................................ 2 Features ...................................................................................... 2Precautions ................................................................................. 2 Parts Identification .....

Page 5 - Introduction; We would like to thank you for purchasing one of our JVC products.; Precautions

2 Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. COMPU LINK/AV COMPU LINK remote controlsystems ...

Page 6 - Parts Identification; Front Panel

3 Parts Identification Front Panel Display Window o ; s f d a h j l / STANDBY / ON STANDBY SPEAKERS 1 PHONES AUDIO/VIDEO CONTROL RECEIVER DSP MODE SURROUND ON / OFF THX ON / OFF SOUND SELECTOR SPEAKER 2 INPUT MODE INPUT ATT LINE DIRECT ADJUST MENU SETUP MENU FM MODE DOWN LEFT UP RIGHT SET EXIT D I M...

Page 7 - Display Window; Indicate the incoming channel signals.; Display

4 Display Window 1 ANALOG indicator (20)• Lights up when an analog input (source) is selected. 2 DIGITAL AUTO indicator (20)• Lights up when auto digital input (DIGITAL AUTO) is selected. 3 Surround/DSP mode indicators• Indicate the current Surround/DSP mode setting. 4 TUNED indicator (24)• Lights u...

Page 8 - Remote Control; AUDIO buttons

5 Remote Control 1 AUDIO buttons (STANDBY), (ON) (16, 17 ) 2 Display window a Remote control operation mode display• Remote control operation mode such as “DVD,” “CD,” “SOUND,” etc. appears.When the remote control operation mode changes, it isshown on this display for about 10 seconds.(When showing ...

Page 9 - Getting Started; A. Using the Supplied FM Antenna; coaxial cable (the kind with a round wire going; Connecting the FM and AM Antennas; FM Antenna Connections; Before Installation; General; Checking the Supplied Accessories; FM Antenna

6 AM LOOP ANTENNA AM EXT AM LOOP FM 75 COAXIAL ANTENNA AMEXT FM 75 CO AX IAL AM LOOP ANTENNA AMEXT FM 75 CO AX IAL AM LOOP Getting Started This section explains how to connect audio/video components and speakers to the receiver, and how to connect thepower supply. A. Using the Supplied FM Antenna Th...

Page 10 - AM Antenna Connections; Connecting the Speakers; • One powered subwoofer to enhance the bass.; main room, see “Basic Settings” on pages 26 to 33.; • If the AM loop antenna wire is covered with vinyl,; AM Loop Antenna; Speaker layout; When connecting the surround back speakers, you have to prepare

7 AM Antenna Connections Connecting the Speakers You can connect the following speakers:• Two pairs of front speakers to produce normal stereo sound.• One pair of surround speakers to enjoy the surround effect.• One center speaker to produce more effective surround effect (to emphasize human voices)...

Page 11 - Basic connecting procedure; Power amplifier; Cut, twist and remove the insulation at the end of; Connecting the surround back speakers; Front speakers 1; speakers connected is within the range of 8; Connecting the subwoofer speaker

8 Basic connecting procedure 2 1 3 4 RIGHT LEFT RIG HT LE FT RIG HT LE FT PREOUT R L SURRBACK SUB WOOFER SURR CENTER FRONT Right surround back speaker Left surround back speaker Power amplifier 1 Cut, twist and remove the insulation at the end of each speaker signal cable (not supplied). 2 Turn the ...

Page 12 - Connecting Audio/Video Components; Audio Components; Audio component connections; Enhance your audio system; the audio right jack.; Turntable

9 RIGHT LEFT AUDIO PHONO CD CDR DVD TAPE MD OUT (REC) IN (PLAY) OUT (REC) FRONT CENTER L R IN (PLAY) SUB WOOFER SURR (REAR) Connecting Audio/Video Components You can connect the following audio/video components to thisreceiver. Refer also to the manuals supplied with your components. Audio Component...

Page 13 - Cassette deck or MD recorder; the COMPU LINK remote control system.

10 CD player CD player To audio output CD recorder To audio input To audio output CD recorder Note: You can connect either a cassette deck or an MD recorder to theTAPE/MD jacks. When connecting an MD recorder to the TAPE/MDjacks, change the source name to “MD,” which will be shown on thedisplay when...

Page 14 - F G

11 Video component connections Use the cables with RCA pin plugs (not supplied).Connect the white plug to the audio left jack, the red plug to theaudio right jack, and the yellow plug to the video jack.• If your video components have S-video (Y/C-separation) and/or component video (Y, P B/ C B , P R...

Page 16 - DVD player; • When you connect the DVD player with stereo output jacks:; • When you connect the DVD player with its analog discrete output

13 DVD player • When you connect the DVD player with stereo output jacks: Note: If your DVD player has the component videooutput jacks, you can connect it to either theCOMPONENT 1 (DVD) or the COMPONENT2 jacks.When connecting the DVD player to eitherone of the component input jacks, make thecomponen...

Page 17 - Digital Connections; Digital input terminals; You can connect any digital component as follows:; Digital output terminal

14 DVD DIGITAL IN DIGITAL 3 (TV) DIGITAL 4 (CDR) DIGITAL 2 (CD) DIGITAL 1 (DVD) DBS Digital Connections This receiver is equipped with four DIGITAL IN terminals—onedigital coaxial terminal and three digital optical terminals—and oneDIGITAL OUT terminal. IMPORTANT: • When connecting the DVD player, d...

Page 18 - transmission indicator on the remote’s display lights up.; • If you aim the remote control directly at the remote sensor on the; Connecting the Power Cord; Plug the power cord into an AC outlet.

15 Putting Batteries in the Remote Control Before using the remote control, insert the two supplied batteriesfirst. 1. On the back of the remote control, remove the battery cover. 2. Insert the batteries. • Make sure to match the polarity: (+) to (+) and (–) to (–). 3. Replace the cover. If the remo...

Page 19 - Basic Operations; Press DOOR DOWN so that you can use the; From the remote control:; • If no sounds come out of the front speakers, press SPEAKERS; • When using the unit:; Simple Operating Procedure; The sound comes out of the speakers.; The last source is activated.; Down; The last source is activated.

16 Basic Operations This section explains only the operations commonly used when you play any sound source.• Before performing basic operations, it is recommended to finish the basic settings on pages 26 to 33. 3. Press DOOR DOWN so that you can use the other buttons inside the front door. 4. If no ...

Page 20 - Selecting the Source to Play; • When you press one of the audio source selecting buttons on the

17 Turning the Power On and Off (Standby) On the unit: To turn on the power, press (STANDBY/ON). The STANDBY lamp goes off, and the front door moves down (sothat the source selecting buttons appear). The currently selected speakers 1 and/or 2 indicator(s) also light(s)up on the display.• If neither ...

Page 21 - Speaker and signal indicators on the display; The signal indicators light up to indicate the incoming signals.; LS; Within

18 Speaker and signal indicators on the display By checking the following indicators, you can easily confirm whichspeakers you are activating and which signals are coming into thisreceiver from the source. The speaker indicators light only —:• The frames of “L,” “C,” “R,” “LS,” “RS, ” and “SB” light...

Page 22 - Activating the Front Speakers; that the front speakers 2 indicator is not lit on the display.); Listening only with headphones:; • If a DSP mode is activated, you can enjoy the DSP effect. (For; Adjusting the Volume; • When you turn MASTER VOLUME slowly,; • The volume level can be adjusted within the range of “– – – dB”; Up

19 Activating the Front Speakers When you have connected two pairs of the front speakers, you canselect which to use. IMPORTANT: You can activate two pairs of the front speakers at the same time onlywhen the SPEAKER LOAD SELECTOR switch on the rear panel isset to the “HIGH” position and when signals...

Page 23 - LINEAR PCM; DIGITAL; DIGITAL AUTO; On the unit; On the remote control; * You can select the digital input only for the sources which you

20 DIGITAL AUTO : Select this for the digital input mode. The receiver automatically detects theincoming signals.The DIGITAL AUTO indicator lights up onthe display, and the digital signal formatindicators for the detected signals also lightup. ANALOG : Select this for the analog input mode. The ANAL...

Page 24 - Attenuating the Input Signal; • Each time you press the button, the input; • This effect is applied to only the sources connected to the analog; Muting the Sound; From the remote control ONLY:; Turning Line Direct On and Off; • Each time you press the button, Line Direct turns on and off.; • If you turn on Line Direct while using the Surround and DSP

21 Attenuating the Input Signal When the input level of the playing source is too high, the soundswill be distorted. If this happens, you need to attenuate the inputsignal level to prevent sound distortion.• You have to make this setting for each source. On the unit ONLY: Press INPUT ATT (inside the...

Page 25 - recorder or DBS tuner.; Making Sounds Natural; • Each time you press the button, CC Converter turns on and off (the; Changing the Display Brightness; You can dim the display.; Dimmer

22 Changing the Source Name When you have connected an MD recorder to the TAPE/MD jacksor the DBS tuner to the TV SOUND/DBS jacks on the rear panel,change the source name which will be shown on the display whenyou select the MD recorder or DBS tuner as the source. On the unit ONLY: When changing the...

Page 26 - Recording a Source; through the DIGITAL OUT terminal.; Basic adjustment auto memory; and; • If the source is FM or AM, you can assign a different setting for; Using the Sleep Timer; Press SLEEP repeatedly.

23 Recording a Source For analog-to-analog recording You can record any analog source through the receiver to—• the cassette deck (or MD recorder) connected to the TAPE/ MD jacks, • the VCRs connected to the VCR 1 and VCR 2 jacks, and• the CD recorder connected to the CDR jacks— at the same time. Fo...

Page 27 - Receiving Radio Broadcasts; Tuning into Stations Manually; The last received station is tuned in.; Press TUNING UP or TUNING DOWN until you

24 Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station. IMPORTANT: • When using the remote control: Check the indication shown on the remote’s display when youpress a button—this indicates the remote control operatio...

Page 28 - Using Preset Tuning; To store the preset stations; Selecting the FM Reception Mode; AUTO MUTING: When a program is broadcasted in stereo,

25 Using Preset Tuning Once a station is assigned to a channel number, the station can bequickly tuned in. You can preset up to 30 FM and 15 AM stations. To store the preset stations Before you start, remember...• There is a time limit in doing the following steps. If the setting is canceled before ...

Page 29 - Basic Settings; • “SPEAKER DISTANCE” is shown as “SP DISTANCE” on the; Setup Menu Configuration; values when shipped from the factory.

26 Basic Settings Some of the following settings are required after connecting and positioning your speakers, while others will makeoperations easier. When performing the basic settings, it is recommended to use the remote control so that you can show the on-screen display menu on the TV. • When usi...

Page 30 - Press DOOR DOWN to use the buttons inside the front door.; Button; Menu operation buttons; To do

27 IMPORTANT: • When using the remote control: Check the indication shown on the remote’s display when you pressa button—this indicates the remote control operation mode for awhile (10 or 5 seconds). • When using the unit: Press DOOR DOWN to use the buttons inside the front door. To close the front ...

Page 31 - Menu Operating Procedure; Ex. When setting the speaker distance; “SETUP” appears only when using the button on the unit.

28 Menu Operating Procedure Ex. When setting the speaker distance On the TV screen 1. Press SETUP MENU. 2. Press fi or % (DOWN or UP) repeatedly to select the desired submenu. • In this example, select “SPEAKER DISTANCE” submenu. 3. Press SET. 4. Set a desired item on the submenu. 1 Press fi or % (D...

Page 32 - Setting the Speakers; Select one of the following.

29 Setting the Speaker Distance—SPEAKER DISTANCE ( 2 ) The distance from your listeningpoint to the speakers is anotherimportant element to obtain thebest possible surround sound ofthe Surround and DSP modes.You need to set the distance fromyour listening point to thespeakers. By referring to the sp...

Page 33 - Setting the Bass Sounds—SUBWOOFER (; Setting the crossover frequency:

30 Setting the Bass Sounds—SUBWOOFER ( 3 ) On this submenu, you can adjustsubwoofer and bass soundsprecisely according to yourpreference. 7 Setting the crossover frequency: When you use a subwoofer, you can select the cutoff frequencyfor the small speakers used. Select one of the crossover frequency...

Page 34 - Setting the Dynamic Range; Setting the Midnight mode:; DVD MULTI playback mode.; Preparing for THX Surround Modes—THX (; Setting THX Surround EX:; Setting the Surround Sound Output; Setting the surround speakers to use

31 Setting the Dynamic Range —DYNAMIC RANGE ( 4 ) Using the Midnight mode, youcan enjoy a powerful sound atnight even at a low volume level. 7 Setting the Midnight mode: Select one of the following: 1 : Select this when you want to reduce the dynamic range a little. The MIDNIGHT MODE indicator light...

Page 35 - Setting the Digital Input Terminals; When “COAXIAL INPUT” is set to “DVD”; Setting the component video input terminals

32 Setting the Digital Input Terminals —DIGITAL IN ( 7 ) When you use the digital inputterminals, you have to registerwhat components you haveconnected to the digital inputterminals. 7 Setting the component connected to the digitalcoaxial terminal Set the component connected to the digital coaxial (...

Page 36 - Memorizing the Volume Level for Each; Storing the volume level for each source; Turning On and Off the Video Output; Select one of the following:; Turning on or off the text information display; Select one of the following:

33 Memorizing the Volume Level for Each Source—ONE TOUCH OPE(ration) ( q ) This unit memorizes manysettings separately for eachsource. (See page 23.)In addition, you can store thevolume level for each sourcetogether with the othermemorized settings. 7 Storing the volume level for each source Select ...

Page 37 - Sound Adjustments; • “CENTER LEVEL” is shown as “CENTER LVL” on the main unit’s; sound adjustments using the Adjustment Menu.; • Items on the menus shown above are all set to the initial; ADJUST MENU; Adjustment Menu Configuration

34 Sound Adjustments When performing the sound adjustments, it is recommended to use the remote control so that you can show theon-screen display menu on the TV. • When using the buttons on the unit, you can perform the same settings referring to the indications shown on themain unit’s display. (The...

Page 38 - • When using the remote control:

35 Button ADJUST MENU SET EXIT fi / % @ / # SET ADJUST MENU EXIT Operation through On-Screen DisplayMenus To make sound adjustments for this receiver, use the remote controlso that you can utilize the on-screen display menus in order to finishimportant adjustments easily while viewing these menus. M...

Page 39 - Ex. When adjusting a DSP parameter; “ADJUST” appears only when using the button on the unit.

36 Menu Operating Procedure Ex. When adjusting a DSP parameter On the TV screen 1. Press ADJUST MENU. 2. Press fi or % (DOWN or UP) repeatedly to select the desired submenu. • In this example, select “DSP PARAMETER” submenu. 3. Press SET. 4. Set a desired item on the submenu. 1 Press fi or % (DOWN o...

Page 40 - Adjusting the Speaker Channel Output; Adjustment procedure on this submenu

37 Adjusting the Speaker Channel Output Levels—LEVEL ( 1 ) On this submenu, you can adjustthe speaker channel output levels.While outputting the test tone,select a speaker channel andadjust its output level.Once adjustment is done on thissubmenu, it is stored for eachsource when you change thesource...

Page 41 - Adjusting the Center Channel; Setting the center channel alignment; * Adjustable range changes according to the other two frequency

38 7 Adjustment procedure on this submenu 1 Press fi or % (DOWN or UP) to select the channel— FRONT, CENTER, SURROUND, or SURROUND BACK,then press SET.The adjustment screen of the selected item appears. 2 Press fi or % (DOWN or UP) to select an item you want to adjust on the selected adjustment scre...

Page 42 - Using the Surround Modes; Introducing the Surround Modes; THX SURR EX : To reproduce the sound through all activated; speakers except the surround back speakers.; • To enjoy the software encoded with Dolby Digital, connect the; Reproducing Theater Ambience

39 Using the Surround Modes This unit activates a variety of Surround Modes automatically according to the stored basic settings and adjustmentsperformed on the Setup and Adjustment Menus (see pages 26 to 38). Introducing the Surround Modes THX Surround EX (Dolby Digital EX) * Best used to reproduce...

Page 43 - lights up on the display.; DTS Surround; • To enjoy the software encoded with DTS Surround, connect the; Input Signals; Surround modes available for input signals; Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.; D HEADPHONE Mode

40 Dolby Surround (Dolby Pro Logic) ** Used to reproduce sound tracks of the software encoded with DolbySurround ( DOLBY SURROUND ). Dolby Surround encoding format records the left front channel,right front channel, center channel, and surround channel signals(total 4 channels) into 2 channels.The D...

Page 44 - Activating the Surround Modes; To cancel the THX Surround; Select and play one of the following sound; • Digital software encoded with 5.1 channel signals; conventional Surround mode.; To cancel the conventional Surround mode; Press THX ON/OFF to activate either “THX

41 Activating the Surround Modes Perform the basic settings and adjustments using the Setup andAdjustment Menus first (see pages 26 to 38). Activating the THX Surround and conventional Surround modefor a source automatically recalls the memorized settings andadjustments done on the above menus. IMPO...

Page 45 - Adjusting the Surround Sounds Temporarily; The 10 keys are activated for sound adjustments.; Press TEST once to check the speaker; • To select the right surround speaker, press; speaker output levels.; • Make sure that you have set the speaker information correctly (see

42 Adjusting the Surround Sounds Temporarily Activating the THX Surround and conventional Surround modefor a source automatically recalls the memorized settings andadjustments done on the Setup and Adjustment Menus.However, if you want to modify the stored adjustments temporarilyonly for the current...

Page 46 - Using the DSP Modes; Reproducing the Sound Field; DAP modes

43 Using the DSP Modes This unit provides a variety of DSP (Digital Signal Processor) Modes. Early reflections Reflections frombehind Direct sounds Reproducing the Sound Field The sound heard in a concert hall, club, etc. consists of direct soundand indirect sound—early reflections and reflections f...

Page 47 - Activating the DSP Modes; HEADPHONE Mode; Press DSP MODE repeatedly until the DSP mode

44 ALL Channel Stereo mode (ALL CH STEREO) This mode can reproduce a larger stereo sound field using all theconnected (and activated) speakers. This mode cannot be usedwithout connecting the surround speakers.• The CENTER CHANNEL submenu settings and the DSP PARAMETER submenu settings cannot be appl...

Page 48 - To cancel the DSP modes; Adjusting the DSP Parameters Temporarily; Press EFFECT to adjust the overall; • You cannot adjust “SEAT POSITION” using the number buttons. If; WALL TYPE 1

45 Notes: • When the surround speakers are deactivated, the 3D-PHONIC processing is applied to the DSP modes (the 3D-PHONIC indicatoralso lights up). • If “USER MODE 1” (then “NO DATA”) appears, press and hold DSP MODE on the unit until it disappears. (This mode is only for servicepersonnel.) To can...

Page 49 - Using the DVD MULTI Playback Mode; Activating the DVD MULTI Playback Mode; Press DVD MULTI so that “DVD MULTI”; • Refer to the manual supplied with the DVD player.

46 Using the DVD MULTI Playback Mode This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVDplayer. Before playing back a DVD, refer also to the manual supplied for the DVD player. Activating the DVD MULTI Playback Mode Perform the basic settings...

Page 50 - COMPU LINK Remote Control System; Automatic Source Selection; When you press the play (; Synchronized Recording; To use synchronized recording, follow these steps:; Put a tape in the cassette deck (or an MD in the

47 COMPU LINK Remote Control System The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor onthe receiver. Automatic Source Selection When you press the play ( 3 3 3 3 3 ) button on a connected component or on its own remote control, the receiver au...

Page 51 - If you have already plugged your CD player, MD; ) COMPU LINK jacks: Use the cables with the monaural; Connect your CD player, MD recorder and this; CD player; TEXT COMPU LINK Remote Control System; COMPU LINK remote control system through the receiver.

48 FUNCTIONS: This remote control system allows you to use the functions listedbelow. Displaying the Disc Information on the TV screen Disc information such as its performer and disc title (and track titlesonly when a CD Text is selected) is shown on the TV screen. Disc Search: Only for CD Player Th...

Page 52 - To exit from the Disc information screen:; Text display operation buttons

49 OPERATIONS: To use this remote control system, you need to connect the TV to theMONITOR OUT jack (see page 12), and set the TV’s input mode tothe proper position to which the receiver is connected.Make sure you have connected the CD player or MD recorderequipped with the TEXT COMPU LINK remote co...

Page 53 - Searching for a Disc (Only for the CD player); Search for a disc by its performer:

50 Search for a disc by its disc title: 1. Press TEXT DISPLAY while “CD” is selected as the source. The Disc Information screen appears on the TV. 2. Press % / fi to move to “SEARCH,” then press SET. The DISC SEARCH screen appears. 3. Press % / fi to move to “DISC TITLE,” then press SET. The DISC TI...

Page 54 - Entering the Disc Information; For the CD Player with the disc memory function:

51 Entering the Disc Information For the CD Player with the disc memory function: You can use the disc memory function through this receiver.The disc information (its performer, disc title, and music genre) ofnormal audio CDs will be stored into the memory built in the CDplayer.For the disc memory f...

Page 56 - AV COMPU LINK Remote Control System; CONNECTIONS 2: Video Cable Connection

53 AV COMPU LINK Remote Control System The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)through the receiver. This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC video components through the videocompo...

Page 57 - Automatic Selection of TV’s Input Mode; • When connecting a TV with the AV COMPU LINK EX terminal to; Automatic Power On/Off; If you have already plugged your VCR 1 (VCR

54 One-Touch DVD Play Simply by starting playback on the DVD player, you can enjoy theDVD playback without setting other switches manually.• When the DVD player is connected through the analog input jacks on this receiver (and analog input is selected), the receiverautomatically turns on and changes...

Page 58 - Operating JVC’s Audio/Video Components; Operating Audio Components; Tuner

55 Operating JVC’s Audio/Video Components You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVCcomponents are preset in the remote control. Operating Audio Components Tuner You can always perform the following operations: FM : Tunes into ...

Page 60 - Operating Video Components

57 Operating Video Components IMPORTANT: To operate JVC’s video components using this remote control:• You need to connect JVC video components through the AV COMPU LINK jacks (see page 53) in addition to the connectionsusing cables with RCA pin plugs (see pages 11 to 13). • Some JVC VCRs can accept...

Page 61 - Operating Other Manufacturers’ Equipment; – Check the indication shown on the remote’s display when you press; Changing the Preset Signal Codes; to the manuals supplied with them.; Set the TV operation mode selector to; Enter manufacturer’s code; See page 61 to find the code.; buttons for some TVs.; Try to operate your TV by pressing; Remote’s display

58 Operating Other Manufacturers’ Equipment This remote control supplied with the receiver can transmit control signals for other manufacturers’ VCRs, TVs, CATVconverters, DBS tuners and DVD players. By changing the transmittable signals from preset ones to the othermanufacturers’, you can operate t...

Page 62 - Refer to the manual supplied for your VCR.

59 To change the transmittable signals foroperating a CATV converter and DBS tuner 1. Set the TV operation mode selector to “CATV/DBS.” 2. Press and hold TV/CATV/DBS (STANDBY/ON). 3. Press TV/DBS. 4. Enter manufacturer’s code using buttons 1–9, and 0. See page 61 to find the code. 5. Release TV/CATV...

Page 63 - Refer to the manual supplied for your CD player.

60 To change the transmittable signals foroperating a CD player 1. Press and hold AUDIO (ON). 2. Press CD. 3. Enter manufacturer’s code using buttons 1–9, and 0. See page 61 to find the code. 4. Release AUDIO (ON). After pressing CD, you can perform the following operations ona CD player: 1 – 9, 0, ...

Page 65 - Troubleshooting; PROBLEM

62 Troubleshooting Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVCservice center. PROBLEM The display does not light up. No sound from speakers. Sound from one speaker only. Continuous hiss or buzzing during FMreception. Occasio...

Page 66 - Specifications; Amplifier

63 Specifications Amplifier Output Power At Stereo operation: Front channels: 120 W per channel, min. RMS, driven into 8 Ω , 20 Hz to 20 kHz with no more than 0.02% total harmonic distortion. 120 W per channel, min. RMS, driven into 4 Ω , 20 Hz to 20 kHz with no more than 0.08% total harmonic distor...

Page 67 - Stereo Separation at REC OUT: 40 dB at 1 kHz; AM tuner; Power Requirements: AC 120V

64 FM tuner (IHF) Tuning Range: 87.5 MHz to 108.0 MHz Usable Sensitivity: Monaural: 12.8 dBf (1.2 µV/75 Ω ) 50 dB Quieting Sensitivity: Monaural: 18.2 dBf (2.2 µV/75 Ω ) Stereo: 38.2 dBf (22.3 µV/75 Ω ) Signal-to-Noise Ratio (IHF-A weighted): Monaural: 78 dB at 85 dBf Stereo: 73 dB at 85 dBf Total H...

Page 68 - HOW TO LOCATE YOUR JVC SERVICE CENTER; Remember to retain your Bill of Sale for Warranty Service.; Do not service the television yourself; Accessories; Authorized Service Centers

BT-51002-5(0301) QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER Dear Customer,In order to receive the most satisfaction from your purchase,please read the instruction booklet beforeoperating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearestauthoriz...

Page 69 - WHAT YOU MUST DO FOR WARRANTY SERVICE:; There are no express warranties except as listed above.; LIMITED WARRANTY; YRS

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA ANDIN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.Such repair and replacement servic...