JVC RX-8020VBK - Manuals - manualsarea.com

Page 2 - CAUTION

G-1 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risq...

Page 3 - For Canada/pour Le Canada; Caution: Proper Ventilation; For Canada/pour le Canada

G-2 For Canada/pour Le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASSB LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITALAPPARATUS AS SET OUT IN THE INTERFERENCE-CAUSINGEQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,”ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.CET APPAREIL NUMERIQUE RESPECTE LE...

Page 4 - Table of Contents; Available Surround and DSP Modes According to; TEXT COMPU LINK Remote Control System .. 44; Selecting Channel Numbers to Reproduce

1 Table of Contents Setting Sound ........................................... 30 Attenuating the Input Signal .................................................... 30Turning Analog Direct On and Off .......................................... 30Reinforcing the Bass .......................................

Page 5 - Introduction; Features; Dolby Digital EX; II; Power sources

2 Introduction We would like to thank you for purchasing one of our JVC products.Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performancefrom your unit, and retain this manual for future reference. Features Dolby Digital EX * Dolby Digital EX is n...

Page 6 - Parts Identification; CONTROL UP; Display Window; Speaker indicators and signal indicators (17); Front Panel

3 Parts Identification Become familiar with the buttons and controls on the receiver before use.Refer to the pages in parentheses for details. ANALOG DIGITAL EQ INPUT ATT SLEEP VOLUME ONE TOUCH OPERATION 3D - PHONIC MIDNIGHT MODE AUTO MUTING TUNED STEREO LINEAR PCM DIGITAL L SUBWFR LS RS C R S LFE D...

Page 7 - Display window; Remote Control; Remote control display window

4 Remote Control 1 Display window 2 buttons (16, 53 – 56) CATV/DBS , VCR1 , TV , AUDIO 3 Source selecting buttons (16, 17, 19, 27, 28, 37)DVD, DVD MULTI, CD, FM/AM, TV/DBS, VIDEO, CDR, PHONO,VCR1, VCR2, TAPE/MD, USB 4 SURROUND button (36) 5 DSP button (36) 6 ANALOG DIRECT button (30) 7 SOUND button ...

Page 8 - Getting Started; Before Installation; General Precautions; Checking the Supplied Accessories; A. Using the Supplied FM Antenna; Connecting the FM and AM Antennas; FM Antenna Connections

5 Getting Started This section explains how to connect audio/video components and speakers to the receiver, and how to connect thepower supply. Before Installation General Precautions • Be sure your hands are dry.• Turn the power off to all components.• Read the manuals supplied with the components ...

Page 9 - AM Antenna Connections; Connecting the Speakers; • One center speaker to produce more effective surround effect (to; Typical speaker layout

6 AM Antenna Connections Turn the loop until you havethe best reception. ANTENNA AM EXT AM LOOP FM 75 COAXIAL 2 3 1 Notes: • If the AM loop antenna wire is covered with vinyl (not supplied), remove the vinyl by twisting it as shown in thediagram. • Make sure the antenna conductors do not touch any o...

Page 10 - Basic connecting procedure; Cut, twist and remove the insulation at the end of; Connecting the front, center and surround speakers; Connecting the surround back speakers; Front speakers; Connecting the subwoofer speaker

7 1 2 3 4 Basic connecting procedure 1 Cut, twist and remove the insulation at the end of each speaker signal cable (not supplied). 2 Turn the knob counterclockwise. 3 Insert the speaker signal cable. 4 Turn the knob clockwise. Connecting the front, center and surround speakers Note: You can connect...

Page 11 - Connecting Audio/Video Components; Audio Components; • Turntable; Analog Connections; Audio component connections; Turntable; Enhancing your audio system

8 Connecting Audio/Video Components You can connect the following audio/video components to thisreceiver. Refer also to the manuals supplied with your components. Audio Components Video Components • Turntable • VCRs (VCR 1 and VCR 2) • CD player* • Video camera • Cassette deck or • TV* MD recorder* ...

Page 12 - • See also page 43 for detailed information about the connection

9 CD player Cassette deck or MD recorder CD recorder Note: You can connect either a cassette deck or an MD recorder to theTAPE/MD jacks. When connecting an MD recorder to the TAPE/MDjacks, change the source name to “MD,” which will be shown on thedisplay when it is selected as the source. See page 1...

Page 13 - Video component connections; E F; Video camera; the video signals from one type of these input jacks are

10 Video component connections Use the cables with RCA pin plugs (not supplied).Connect the white plug to the audio left jack, the red plug to theaudio right jack, and the yellow plug to the video jack.• If your video components have S-video (Y/C-separation) and/or component video (Y, P B/ C B , P R...

Page 15 - DVD player; • When you connect a DVD player with stereo output jacks:

12 DVD player • When you connect a DVD player with stereo output jacks: DVD player VIDEO FRONT RIGHT LEFT DVD TV SOUND DBS OUT (REC) IN (PLAY) VCR1 OUT (REC) IN (PLAY) VCR2 MONITOR OUT S-VIDEO VIDEO COMPONENT VIDEO MONITOR OUT DBS DVD Y P B /C B P R /C R AUDIO A D B C DVD DVD player VIDEO FRONT RIGH...

Page 16 - Digital Connections; Digital input terminals; You can connect any digital equipment as follows.; Digital output terminal

13 DVD DBS DIGITAL IN DIGITAL 3 (TV) DIGITAL 4 (CDR) DIGITAL 2 (CD) DIGITAL 1 (DVD) PCM/DOLBY DIGITAL/DTS DIGITAL OUT Digital Connections This receiver is equipped with four DIGITAL IN terminals—onedigital coaxial terminal and three digital optical terminals—and oneDIGITAL OUT terminal. IMPORTANT: •...

Page 17 - USB Connection; IMPORTANT; How to install the USB drivers; If your PC is running on a different version of; PC

14 5. Check if the drivers are correctly installed. 1. Open the Control Panel on your PC: Select [Start] = [Settings] = [Control Panel]. 2. Select [System], then [Device Manager] and click [Sound, video and game controllers] and [Universal serial buscontrollers].The following window appears, and you...

Page 18 - Connecting the Power Cord; Plug the power cord into an AC outlet.; Putting Batteries in the Remote Control; On the back of the remote control, remove the

15 Connecting the Power Cord Before plugging the receiver into an AC outlet, make sure that allconnections have been made. Plug the power cord into an AC outlet. Keep the power cord away from the connecting cables and theantenna. The power cord may cause noise or screen interference. Werecommend tha...

Page 19 - Basic Operations; Before using the remote control; How to confirm the remote control operation mode; Turning On the Power; From the remote control:; Press AUDIO; Selecting the Source to Play; Press one of the source selecting buttons.; Buttons; Indications

16 Basic Operations The following operations are commonly used when you play any sound sources. DVD MULTI Select the DVD player for viewing the digitalvideo disc using the analog discrete outputmode (5.1-channel reproduction).To enjoy the DVD MULTI playback, seepage 37. DVD Select the DVD player. VC...

Page 20 - Changing the source name; On the front panel ONLY:; When changing the source name from “TAPE” to “MD”:; Press and hold SOURCE NAME; When changing the source name from “TV” to “DBS”:; Speaker and signal indicators on the display; SUBWFR

17 Changing the source name When you have connected an MD recorder to the TAPE/MD jacksor a DBS tuner to the TV SOUND/DBS jacks on the rear panel,change the source name which will be shown on the display. On the front panel ONLY: When changing the source name from “TAPE” to “MD”: 1. Press TAPE/MD (S...

Page 21 - To use neither sets of the speakers,; Listening Only with Headphones; HEADPHONE mode; Adjusting the Volume; Selecting the Front Speakers

18 MASTER VOLUME To use neither sets of the speakers, press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2 so that the SPEAKERS 1 andSPEAKERS 2 indicators disappear from the display.The HEADPHONE indicator lights up and “HEADPHONE”appears on the display.• Activating the speakers turns on the Surround and D...

Page 22 - DGTL; DIGITAL; DGTL AUTO; Press one of the source selecting buttons—DVD, TV; On the front panel; ANALOG

19 DGTL AUTO : Select this for the digital input mode. The receiver automatically detects the incomingsignals.The DGTL AUTO indicator lights up on thedisplay, and the digital signal format indicatorsfor the detected signals also light up. ANALOG : Select this for the analog input mode.The ANALOG ind...

Page 23 - Muting the Sound; Changing the Display Brightness; From the remote control ONLY:; Using the Sleep Timer; From the remote control ONLY:; Press SLEEP repeatedly.; Recording a source; Basic adjustment auto memory

20 When the shut-off time comes: The receiver turns off automatically. To check or change the time remaining until the shut-off time: Press SLEEP once.The remaining time until the shut-off time appears in minutes.• To change the shut-off time, press SLEEP repeatedly. To cancel the Sleep Timer: Press...

Page 24 - Basic Settings; Basic Procedure; Ex. When setting the subwoofer information; buttons; SETTING 2 menu

21 Basic Settings Some of the following settings are required after connecting and positioning your speakers while others will makeoperations easier.• When performing the basic settings, it is recommended to use the remote control so that you can show theon-screen display on the TV. • When using the...

Page 25 - Setting the Speakers; Subwoofer setting; —SUBWOOFER; YES; –—FRONT; NONE; Selecting surround speakers to use; —SURR CH

22 1 Setting the Speakers To obtain the best possible surround sound from the Surround andDSP modes, you have to register the setting about the speakerarrangement after all connections are completed. 7 Subwoofer setting —SUBWOOFER [On-screen display] [Front panel] Select whether you have connected a...

Page 26 - Setting the Speaker Distance; Measuring unit; —UNIT; feet

23 2 Selecting Channel Numbers to ReproduceMulti-channel Digital Software —EX/ES [On-screen display] [Front panel] You can select 5.1-channel reproduction or 6.1-channel reproductionwhen playing back multi-channel (more than 5.1-channel) digitalsoftware with setting the surround back speakers to “LA...

Page 27 - Setting the Bass Sounds; Crossover frequency; —CROSSOVER; Low frequency effect attenuator; —LFE ATT; Setting the Dynamic Range; —MID NIGHT

24 4 Setting the Bass Sounds You can adjust subwoofer and bass sounds precisely according toyour preference. 7 Crossover frequency —CROSSOVER [On-screen display] [Front panel] When you use a subwoofer, you can select the cutoff frequencyfor the small speakers used. Select one of the crossover freque...

Page 28 - When “DIGITAL 1 (DGTL COAX 1)” is set to “CD”; Setting the Component Video Input; For the DVD player; —VIDEO DVD; —VIDEO DBS; COMPONENT; Terminals; Digital coaxial terminal; —DIGITAL 2, DIGITAL 3 and

25 When “DIGITAL 1 (DGTL COAX 1)” is set to “CD” 2: DVD 3: TV (or DBS*) 4: CDR “ 2: DVD 3: TV (or DBS*) 4: MD** “ 2: DVD 3: MD** 4: CDR “ 2: MD** 3: TV (or DBS*) 4: CDR “ (back to the beginning) * If you have changed the source name from “TV” to “DBS,”“DBS” appears (see page 17). ** If you want to c...

Page 29 - Memorizing the Volume Level for Each Source; Showing the Text Information on the Display; Select one of the following:

26 8 Memorizing the Volume Level for Each Source —ONE TOUCH OPR (ONE TOUCH) [On-screen display] [Front panel] This unit memorizes some settings separately for each source—OneTouch Operation (see page 20).In addition, you can store the volume level for each source with theother memorized settings. Se...

Page 30 - Tuning into Stations Manually; Using Preset Tuning; To store the preset stations; Receiving Radio Broadcasts

27 MEMORY Tuning into Stations Manually On the front panel: 1. Press FM/AM to select the band (FM or AM). The FM/AM lamp on the front panel buttonlights up. The last received station of theselected band is tuned in.• Each time you press the button, the band alternates between FM and AM. 2. Press FM/...

Page 31 - To tune in a preset station; or; Press the 10 keys to select a; Selecting the FM Reception Mode

28 To tune in a preset station On the front panel: 1. Press FM/AM to select the band (FM or AM). The FM/AM lamp on the front panel button lightsup. The last received station of the selected band istuned in.• Each time you press the button, the band alternates between FM and AM. 2. Press FM/AM PRESET...

Page 32 - Storing the preset stations

29 On-screen operating buttons MENU PLAY STOP /REW DOWN – TUNING – UP FF/ EXIT PAUSE SET CONTROL 7 Storing the preset stations 1. Press MENU. The MENU screen appears on the TV. 2. Press 5 or ∞ to move to “TUNER CONTROL,” then press 2 or 3 . The TUNER CONTROL menu appears. 3. Tune into a station you ...

Page 33 - Setting Sound; Turning Analog Direct On and Off; – When Analog Direct turns on, “A. DIRECT” appears on the; Attenuating the Input Signal; • Each time you press and hold the button, the

30 Setting Sound You can select the following sound settings to your preference according to your listening conditions or sources.• Items shown in this section are the initial values when shipped from the factory. • The on-screen display will disappear if no operation is done for about 1 minute. Tur...

Page 34 - Activating the Subwoofer Sound; The MENU screen appears on the TV.; Reinforcing the Bass; The SOUND CONTROL menu appears.

31 BASS BOOST SOUND 1 BOOST BASS Notes: • This function does not affect the sounds outputting from the surround speakers. • When Analog Direct is in use (see page 30), the Bass Boost function is canceled temporarily. Activating the Subwoofer Sound You can cancel the subwoofer sound even though you h...

Page 35 - Using Surround Modes and DSP Modes; Surround Modes; Reproducing Theater Ambience; Dolby Surround; Dolby Digital; Dolby Pro Logic; Dolby Pro Logic II; Movie theater

32 Using Surround Modes and DSP Modes This unit activates a variety of Surround modes and DSP (Digital Signal Processor) modes. To use Surround and DSPmodes properly, speakers required for creating each Surround and DSP modes should be activated. ■ Surround Modes Reproducing Theater Ambience In a mo...

Page 36 - Reproduced software and channels for each Surround mode; If only the front speakers are connected,; DTS Digital Surround

33 DTS Digital Surround ** Used to reproduce multi-channel sound tracks of the softwareencoded with DTS Digital Surround ( ). DTS Digital Surround is a discrete 5.1-channel digital audio format available on CD, LD, and DVD software.Compared to Dolby Digital, DTS Digital Surround format has alower au...

Page 37 - DSP Modes; Direct sounds; D HEADPHONE Mode; Sound reproduced from normal stereo; DAP modes; Early reflections

34 ■ DSP Modes Reflections frombehind Direct sounds All Channel Stereo mode (ALL STEREO) This mode can reproduce a larger stereo sound field using all theconnected (and activated) speakers. All Channel Stereo can be used when the front and surroundspeakers are connected to this receiver without resp...

Page 39 - To cancel the Surround mode; Available Surround and DSP modes for each input signal; Activating the DSP Modes; To cancel the DSP mode

36 Activating the Surround Modes Available Surround modes will vary depending on how manyspeakers are used with this receiver. Make sure that you have set the speaker setting correctly (seepage 22). 1. Set the analog or digital input mode for the source you like to use and start playing. When playin...

Page 40 - Using the DVD MULTI Playback Mode; Activating the DVD MULTI Playback Mode; Select the analog discrete output mode on the; • Refer also to the manual supplied with the DVD player.

37 Using the DVD MULTI Playback Mode This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVDplayer. Before playing back a DVD, refer also to the manual supplied with the DVD player. When using DVD MULTI playback mode, connect the DVD player with ...

Page 41 - Adjusting Sound; If Analog Direct is in use, you cannot make any sound adjustments.; On-screen operating buttons

38 Adjusting Sound You can adjust sound parameters to your preference after completing basic setting.• When performing the sound adjustments, it is recommended to use the TV screen so that you can show theon-screen display on the TV. • When using the buttons on the front panel or remote control with...

Page 42 - level changes as follows:; EQ 1kHz; • Each time you press the button, the frequency; EQ 1kHz

39 CONTROL DOWN UP 2. Press CONTROL UP 5 or DOWN ∞ repeatedly to adjust the frequency level. The DIGITAL EQ indicator lights up on thedisplay.• The frequency level changes from –8 dB to +8 dB in 2 dB steps. 3. Repeat steps 1 and 2 to adjust the other frequency levels. To flat the equalization patter...

Page 43 - Adjustable speakers; to; for the Surround mode, no test tone is available.

40 Using the on-screen display (through the remote control]: Adjustment is also possible without outputting the test tone. In thiscase, you can skip steps 2, 3 and 7 below. 1. Show LEVEL ADJUST menu (see page 38). 2. Press 5 or ∞ to move to “TEST TONE.” 3. Press 2 or 3 to select “ON” to check if you...

Page 45 - Adjustable parameters

42 EFFECT LEVEL :(EFFECT) ROOM SIZE : (ROOMSIZE) LIVENESS : Adjust the DAP effect level. As thenumber increases, the DAP effectbecomes stronger. (Normally select “3.”Adjustable range: 1 to 5 ) Adjust the virtual room size. As thenumber increases, the interval betweenreflections increases so that you...

Page 46 - COMPU LINK Remote Control System; Automatic Source Selection; When you press the play (; Synchronized Recording; To use synchronized recording, follow these steps:; Put a tape in the cassette deck (or an MD in the

43 COMPU LINK Remote Control System The COMPU LINK remote control system allows you to operate JVC’s audio components through the remote sensor onthe receiver. COMPU LINK – 4 (SYNCHRO) Automatic Source Selection When you press the play ( 3 3 3 3 3 ) button on a connected component or on its own remo...

Page 47 - TEXT COMPU LINK Remote Control System; Showing the Disc Information on the TV screen; If you have already plugged your CD player, MD; Use the cables with the monaural; Connect your CD player, MD recorder and this; CD player

44 TEXT COMPU LINK Remote Control System The TEXT COMPU LINK remote control system has been developed to deal with the disc information recorded in theCD Text* and MDs. Using these information in the discs, you can operate a CD player or MD recorder equipped withthe TEXT COMPU LINK remote control sy...

Page 48 - Note on; To exit from the Disc information screen; Make sure you have connected a CD player or; Showing the Disc Information on the TV

45 1 Source name: CD or MD 2 Select or , then press SET to change the disc. 3 Track numbers and track titles.• When you move to a track number, you can change the track information by pressing 2 or 3 . Each time you press the button, track informationalternates between its track title and its perfor...

Page 49 - Searching for a Disc (Only for the CD player); Search for a disc by its performer:

46 Searching for a Disc (Only for the CD player) Search for a disc by its performer: 1. Press TEXT DISPLAY while “CD” is selected as the source. The Disc Information screen appears on the TV. 2. Press 5 or ∞ to move to “SEARCH,” then press SET. The DISC SEARCH screenappears . 3. Press 5 or ∞ to move...

Page 50 - Entering the Disc Information; For the CD Player with the disc memory function:

47 Entering the Disc Information For the CD Player with the disc memory function: You can use the disc memory function through this receiver.The disc information (its performer, disc title, and music genre) ofnormal audio CDs will be stored into the memory built in the CDplayer.For the disc memory f...

Page 52 - AV COMPU LINK Remote Control System; CONNECTIONS 1: AV COMPU LINK Connection; composite video jacks

49 AV COMPU LINK Remote Control System The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player)through the receiver. This receiver is equipped with the AV COMPU LINK-III, which adds a function to operate JVC’s video components through the videoco...

Page 53 - Automatic Selection of TV’s Input Mode; Automatic Power On/Off

50 One-Touch DVD Play Simply by starting playback on the DVD player, you can enjoy theDVD playback without setting other switches manually.• When the DVD player is connected through the analog input jacks on this receiver (and analog input is selected), the receiverautomatically turns on and changes...

Page 54 - Operating JVC’s Audio/Video Components; Tuner; Operating Audio Components

51 Operating JVC’s Audio/Video Components You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC’scomponents are preset in the remote control. IMPORTANT: To operate JVC’s audio components using this remote control:• You need to connect JVC...

Page 55 - MD recorder

52 CD changer After selecting “CDDSC” by pressing CONTROL repeatedly, youcan perform the following operations on a CD changer: 3 PLAY :Start playing. 4 :Return to the beginning of the current (or previous) track. ¢ :Skip to the beginning of the next track. 7 STOP :Stop playing or recording. 8 PAUSE ...

Page 56 - Operating Video Components; VCR

53 Operating Video Components IMPORTANT: To operate JVC’s video components using this remote control:• You need to connect JVC’s video components through the AV COMPU LINK jacks (see page 49) in addition to the connectionsusing cables with RCA pin plugs (see pages 10 to 12). • Some JVC’s VCRs can ac...

Page 57 - Operating Other Manufacturers’ Video Equipment; “CALL” appears on the remote control display window.; Enter a manufacturer’s code using buttons 1–9,; See the list below to find the code.; Try to operate your TV by pressing TV; If there are more than one code listed for your brand of TV,; try each one until the correct one is entered.; Manufacturer

54 Operating Other Manufacturers’ Video Equipment To change the transmittable signals foroperating another manufacturer’s TV 1. Press and hold TV . 2. Press TV/DBS. “CALL” appears on the remote control display window. 3. Enter a manufacturer’s code using buttons 1–9, and 0. See the list below to fin...

Page 59 - Try to operate your DVD player by pressing one

56 To change the transmittable signals foroperating another manufacturer’s DVD player 1. Press and hold AUDIO . 2 Press DVD. “CALL” appears on the remote control display window. 3. Enter a manufacturer’s code using buttons 1–9, and 0. See the following list to find the code. 4. Release AUDIO . After...

Page 60 - Troubleshooting; SOLUTION

57 Troubleshooting Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC’sservice center. SOLUTION Plug the power cord into an AC outlet. (See page15.) Check speaker wiring and reconnect if necessary.(See pages 6 to 8.) Press SPEAKERS...

Page 62 - Specifications; Amplifier

59 Specifications Amplifier Output Power: At Stereo operation: Front channels: 120 W per channel, min. RMS, driven into 8 Ω , 20 Hz to 20 kHz, with no more than 0.08% totalharmonic distortion. At Surround operation: Front channels: 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no more ...

Page 64 - HOW TO LOCATE YOUR JVC SERVICE CENTER; Remember to retain your Bill of Sale for Warranty Service.; Do not service the television yourself; Accessories; Authorized Service Centers

BT-51002-5(0301) QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER Dear Customer,In order to receive the most satisfaction from your purchase,please read the instruction booklet beforeoperating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearestauthoriz...

Page 65 - WHAT YOU MUST DO FOR WARRANTY SERVICE:; LIMITED WARRANTY

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA ANDIN COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.Such repair and replacement servic...

Page 67 - INSTRUCTIONS; M A N U A L D ’ I N S T R U C T I O N S; RECEPTEUR DE COMMANDE AUDIO/VIDEO

For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0870-002A [C] RX-8020VBK MENU +− +− +− 2 3 1 5 6 4 8 9 7/P 0 +10 10 BOOST ∗ FRONT•L MENU ENTER ∗ FRONT...

Page 70 - English

1 English Table of Contents Setting Sound ........................................... 30 Attenuating the Input Signal .................................................... 30Turning Analog Direct On and Off .......................................... 30Reinforcing the Bass ...............................

Page 83 - “Playback” of “Audio,” and close the window.

14 English 5. Check if the drivers are correctly installed. 1. Open the Control Panel on your PC: Select [Start] = [Settings] = [Control Panel]. 2. Select [System], then [Device Manager] and click [Sound, video and game controllers] and [Universal serial buscontrollers].The following window appears,...

Page 89 - To check or change the time remaining until the shut-off time:

20 English When the shut-off time comes: The receiver turns off automatically. To check or change the time remaining until the shut-off time: Press SLEEP once.The remaining time until the shut-off time appears in minutes.• To change the shut-off time, press SLEEP repeatedly. To cancel the Sleep Time...

Page 92 - ON; —DIST UNIT

23 English 2 Selecting Channel Numbers to ReproduceMulti-channel Digital Software —EX/ES [On-screen display] [Front panel] You can select 5.1-channel reproduction or 6.1-channel reproductionwhen playing back multi-channel (more than 5.1-channel) digitalsoftware with setting the surround back speaker...

Page 102 - DTS-ES Extended Surround; DVD MULTI Playback Mode

33 English DTS Digital Surround ** Used to reproduce multi-channel sound tracks of the softwareencoded with DTS Digital Surround ( ). DTS Digital Surround is a discrete 5.1-channel digital audio format available on CD, LD, and DVD software.Compared to Dolby Digital, DTS Digital Surround format has a...

Page 103 - JVC Theater Surround

34 English ■ DSP Modes Reflections frombehind Direct sounds All Channel Stereo mode (ALL STEREO) This mode can reproduce a larger stereo sound field using all theconnected (and activated) speakers. All Channel Stereo can be used when the front and surroundspeakers are connected to this receiver with...

Page 105 - Activating the Surround Modes

36 English Activating the Surround Modes Available Surround modes will vary depending on how manyspeakers are used with this receiver. Make sure that you have set the speaker setting correctly (seepage 22). 1. Set the analog or digital input mode for the source you like to use and start playing. Whe...

Page 113 - the TEXT COMPU LINK remote control system through the receiver.

44 English TEXT COMPU LINK Remote Control System The TEXT COMPU LINK remote control system has been developed to deal with the disc information recorded in theCD Text * and MDs. Using these information in the discs, you can operate a CD player or MD recorder equipped with the TEXT COMPU LINK remote ...

Page 117 - To correct an incorrect character:

48 English For the MD recorder: You can write the disc information (disc title and song titles) ontothe disc. You can only write the song title for the song currentlyselected.• If you have the CD-MD combination deck, you can also enter the disc information (its performer, disc title, and its music g...

Page 121 - CD changer

52 English CD changer After selecting “CDDSC” by pressing CONTROL repeatedly, youcan perform the following operations on a CD changer: 3 PLAY :Start playing. 4 :Return to the beginning of the current (or previous) track. ¢ :Skip to the beginning of the next track. 7 STOP :Stop playing or recording. ...

Page 125 - Press and hold AUDIO

56 English To change the transmittable signals foroperating another manufacturer’s DVD player 1. Press and hold AUDIO . 2 Press DVD. “CALL” appears on the remote control display window. 3. Enter a manufacturer’s code using buttons 1–9, and 0. See the following list to find the code. 4. Release AUDIO...

Page 129 - AM tuner

60 English FM tuner (IHF) Tuning Range: 87.5 MHz to 108.0 MHz Usable Sensitivity: Monaural: 12.8 dBf (1.2 µV/75 Ω ) 50 dB Quieting Sensitivity: Monaural: 21.3 dBf (3.2 µV/75 Ω ) Stereo: 41.3 dBf (31.5 µV/75 Ω ) Signal-to-Noise Ratio (IHF-A weighted): Monaural: 78 dB at 85 dBf Stereo: 73 dB at 85 dBf...