JVC LPT1056-001A - Manuals - manualsarea.com

Page 2 - Safety Precautions; CAUTION; Press the; DVD Button

2 Safety Precautions WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: This Digital Video Disc Player employs a Laser System.To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference, should ...

Page 3 - Table of Contents; Introduction; Note: Indicates special operating features of this unit.

3 INTR ODUCTION Table of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Important notes on controlling this unit . . . . . . . . . 2Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About the symbols for instructions . . . . ...

Page 4 - Before Use; Playable Discs; Notes on DVDs and Video CDs; Types of video CDs; Remote Control Operation Range; Remote control battery installation

4 Before Use Playable Discs Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. • Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. • D...

Page 5 - When shipping the unit; Notes on Discs; ” may appear on the TV screen during operation.; Selecting the Viewing Source; • If you want to view DVD deck output source:

5 INTR ODUCTION Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting the unit The picture and sound of a nearby T...

Page 6 - Front Panel; Remote Sensor; Video IN Jack

6 Front Panel Disc Tray (DVD deck) Insert a disc here. Cassette Compartment (VCR deck) Insert a video cassette here. Remote Sensor Point the DVD+VCR remote control here. Display Windows < OPEN/CLOSE Opens or closes the disc tray. ; Pause playback or recording. Press repeatedly for frame-by-frame ...

Page 7 - Display Window; The DVD deck is selected.

7 INTR ODUCTION Display Window The DVD deck is selected. Lights when TV mode is active. DVD+VCR is Recording. (VCR part only) A disc is in the DVD deck.(Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates repeat mode. DVD+VCR is in timer recording or a timer recording is progr...

Page 8 - Remote Control

8 Remote Control OPEN/CLOSE, EJECT ( < ) - Ejects the tape in the VCR deck. - Opens and closes the disc tray. AUX Select input source for recording into tape. DISC MENU Accesses menu on a DVD disc. SKIP ( : / 9 ) Skip to beginning of current chapter or track, press twice in quick successions to g...

Page 9 - Rear Panel; AERIAL

9 INTR ODUCTION Rear Panel Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. AERIAL Connect the aerial using this jack. AC Power Cord Connect to a power source. DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video...

Page 10 - Precautions; Connections

10 Precautions When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). When discarding batteries, environmental problems must be considered and the local rules or laws...

Page 11 - Connecting to Optional; COAXIAL; Digital Multi-channel sound

11 PREP ARA T ION Connections (Continued) Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right i...

Page 12 - Only carry out stages 5 ~ 8 if you cannot obtain; Initial preset; TV STATION TABLE

12 Before Operation-VCR part Tuning in a video channel on your TV Notes: • The output frequency of this DVD+VCR is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your DVD+VCR. Stages 5 ~ 8 will sho...

Page 13 - Before Operation-VCR part; PREP; Setting the clock Manually

13 Before Operation-VCR part PREP ARA T ION Setting the clock Manually The clock in your DVD+VCR controls time and date settings for your DVD+VCR. 1. Press i . Press 2 or 1 to select SET . Press ENTER/OK . The auto adjust mode can be set to “OFF” by pressing ENTER/OK if you want to set the time manu...

Page 15 - Tuning in TV Stations Manually

15 Before Operation-VCR part PREP ARA T ION Tuning in TV Stations Manually In certain areas of the country broadcast signals may be too weak for your DVD+VCR’s automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for you...

Page 17 - Before Operation-DVD part; To display and exit the Menu:; General Operation; Menu Language; TV Aspect; DVD; DVD

17 PREP ARA T ION Before Operation-DVD part By using the DVD Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 17 to 19. To display and ...

Page 18 - PBC; VCD

18 Before Operation-DVD part AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other e...

Page 19 - Rating; If you forget your Security Code; Area Code

19 Before Operation-DVD part PREP ARA T ION LOCK (Parental Control) Rating Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rate...

Page 20 - Getting a better picture; or; Shuttle

20 Operation with tape Playing a tape You will only be able to load and eject video cassettes when your DVD+VCR is plugged into the mains. Your DVD+VCR may also playback recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic t...

Page 21 - Operation with tape; OPERA; Instant Timer Recording; star t recording

21 Operation with tape OPERA T ION Instant Timer Recording Your DVD+VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording star t recording immediately for a set period of time or until the video cassette runs out. Your DVD+VCR incorporates Long Play (LP) which ...

Page 22 - is a registered trademark of Gemstar; system is manufactured under

22 Operation with tape ShowView Programming ShowView greatly simplifies entering the date, channel, start and end times of a Timer Recording by simply entering a ShowView Code. ShowView Codes are published in most TV guide magazines; they can vary one to nine numbers in length. S HOW V IEW is a regi...

Page 23 - Timer recording using On Screen

23 Operation with tape OPERA T ION Timer recording using On Screen Display You may set up to seven timer record events within one month of the current date. Note: Before setting the timer make sure that you have set the DVD+VCR clock correctly and you know which stations you have tuned TV stations o...

Page 24 - PLEASE CHECK

24 Operation with tape Timer recording using On Screen Display (Continued) 8. Press i to set another timer record event and follow steps 3 to 8. Check that the timer event details are correct. Press i return to screen. If PLEASE CHECK is displayed, you have entered incorrectly and will need to re-en...

Page 25 - Additional Operation - VCR part

25 OPERA T ION Additional Operation - VCR part Hi-Fi Stereo Sound System (NIC) Your DVD+VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder. This allows you to record and playback the sound in several different ways. Video cassettes recorde...

Page 26 - AUTO; To set the decoder; DECODER

26 Additional Operation - VCR part Video Doctor (Self-Diagnosis) This feature informs you that there is a problem with your DVD+VCR. These error messages will appear on the TV screen. 1. Press i . Press 2 or 1 to select . Press ENTER/OK . 2. Press 3 or 4 to check a problem. ANTENNA CONNECT• PLEASE C...

Page 27 - Copying from DVD to VCR

27 Additional Operation - VCR part OPERA T ION Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the DVD+VCR’s external inputs. 1. Make sure that the component you want to record from is connected properly to the DVD+VCR. 2....

Page 28 - If a menu screen is displayed; General Features; Moving to another TITLE

28 Operation with DVD and Video CD Playback Setup 1. Turn on the TV and select the video input source connected to the DVD+VCR. 2. Turn on the audio system (if applicable) and select the input source connected to the DVD+VCR. 3. Press OPEN/CLOSE ( < ) to open the disc tray and load your chosen di...

Page 29 - Operation with DVD and Video CD; To enter a Marker

29 Operation with DVD and Video CD OPERA T ION Still Picture and Frame-by-Frame Playback 1. Press ; during playback. Advance the picture frame-by-frame by pressing ; repeatedly. 2. To exit still motion mode, press 1 . Search 1. Press 6 or 5 during playback. 2. Press 6 or 5 repeatedly to select the r...

Page 30 - The menu offers features such as camera angles,

30 Operation with DVD and Video CD Changing the Audio Channel Press AUDIO repeatedly during playback to hear a different audio channel (Stereo, Left, Right). Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the ...

Page 31 - Operation with Audio CD and MP3 Disc; The selected item is highlighted.; Maintenance and Service; Handling the Unit; Items

31 OPERA T ION Operation with Audio CD and MP3 Disc On-Screen Display - DVD You can display the general playback status on the TV screen. Some items can be changed using the menu. To use the on-screen display: 1. Press DISPLAY during playback. 2. Press 3 / 4 to select an item. The selected item is h...

Page 32 - Playing an Audio CD or MP3 Disc; Audio CD

32 Playing an Audio CD or MP3 Disc The DVD+VCR can play MP3 formatted recordings on CD-ROM, CD-R, or CD-RW discs. Audio CD Once you insert an audio CD a menu appears on the TV screen. Press 3 / 4 to select a track then press 1 or ENTER/OK and playback starts. MP3 1. Press 3 / 4 to select a folder, a...

Page 33 - Audio CD and MP3 Disc Features; Pause

33 Playing an Audio CD or MP3 Disc OPERA T ION Audio CD and MP3 Disc Features Pause 1. Press ; during playback. 2. To return to playback, press 1 or press ; again. Moving to another Track 1. Press 9 or : briefly during playback to go to the next track or to return to the beginning of the current tra...

Page 34 - Repeat Programmed Tracks

34 Playing an Audio CD or MP3 Disc Programmed Playback The program function enables you to store your favourite tracks from any disc in the player memory. A program can contain 30 tracks. 1. Insert a disc. AUDIO CD or MUSIC menu appears. 2. Press MNL.PROG. The E mark will appear to the right of the ...

Page 35 - Viewing a JPEG Disc; RETURN; Slide Show; JPEG

35 OPERA T ION Viewing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. 2. Press 3 / 4 to select a folder, and press ENTER/ OK. A list of files in the folder appears. If you are in a file list and want to...

Page 36 - Language and Area Code List; Language Code List; Choose a area code from this list.

36 Language and Area Code List Language Code List Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Area Code List Choose a area code from this list. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 ...

Page 37 - REFERENCE; Troubleshooting; Symptom; The power cord is disconnected.

37 REFERENCE Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD+VCR does not work. • DVD or VCR...

Page 39 - Specification; General

39 REFERENCE Specification General System Inputs (VCR) Outputs (DVD) Outputs (VCR/DVD) • Designs and specifications are subject to change without notice. Power requirements AC 200-240 V, 50 Hz Power consumption 17 W Dimensions (approx.) 430 X 78.5 X 265 mm (w/h/d) Mass (approx.) 4.2 kg Operating tem...