JVC KS-FX463R - Manuals - manualsarea.com

Page 2 - ENGLISH; CONTENTS

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, toensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS .................................................... 3 RADIO BASIC OPER...

Page 3 - BASIC OPERATIONS; To drop the volume in a moment; To turn off the power

ENGLISH 3 BASIC OPERATIONS Turn on the power. Adjust the volume. Adjust the sound as you want (see pages 17 – 19). 1 2 Play the source. To operate the tuner, see pages 4 – 15.To operate the tape deck, see page 16.To operate the CD changer, see pages 26 – 28. 3 4 To drop the volume in a moment Press ...

Page 4 - RADIO BASIC OPERATIONS; Listening to the radio; To tune in a particular frequency manually:; Start searching a station.

4 ENGLISH RADIO BASIC OPERATIONS Listening to the radio 2 AM FM FM1 FM2 FM3 AM 1 Note on One-Touch Operation: When you select a band in step 2 below, the power automatically comes on. Youdo not have to press this button to turn on the power. 2 1 3 Turn on the power. Select the band (FM1, FM2, FM3 or...

Page 5 - Storing stations in memory; FM station automatic preset: SSM

ENGLISH 5 Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory.• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)• Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM st...

Page 6 - Manual preset

6 ENGLISH Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into preset number 1 of the FM1 band FM Repeat the above procedure to store other stations into otherpreset numbers. Notes: • A previously preset station i...

Page 7 - Tuning into a preset station

ENGLISH 7 Tuning into a preset station You can easily tune into a preset station.Remember that you must store stations first. If you have not stored them yet, see pages 5and 6. 1 Select the band (FM1, FM2, FM3or AM) you want. 2 Select the number (1 – 6) for the preset stationyou want. To change the ...

Page 8 - What you can do with RDS EON; Tracing the same programme automatically (Network-; RDS OPERATIONS

8 ENGLISH What you can do with RDS EON RDS (Radio Data System) allows FM stations to send an additional signal along with theirregular programme signals. For example, the station send their station names, as well asinformation about what type of programme they broadcast, such as sports or music, etc...

Page 10 - Using Standby Reception; TA Standby Reception; PTY Standby Reception

10 ENGLISH Using Standby Reception Standby Reception allows the unit to switch temporarily to your favorite programme (PTY:Programme Type) and Traffic Announcement (TA) from the current source — another FMstation and Tape or CD changer. Note: Standby Reception will not work if you are listening to a...

Page 11 - Selecting Your Favorite Programme for PTY Standby

11 ENGLISH Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory.When shipped from the factory, “NEWS” is stored as the programme type for PTY StandbyReception. 1 Press and hold SEL (select) for more than 2seco...

Page 12 - To store your favorite programme types

12 ENGLISH To store your favorite programme types 1 Press and hold SEL (select) for more than 2seconds to enter the general setting mode(see page 22). 2 Select “PTY SRCH (search)” if not shown on thedisplay. 3 Select one of twenty-nine PTY codes. (See page15.) Selected code name appears on the displ...

Page 13 - To search your favorite programme type

13 ENGLISH 2 1 To search your favorite programme type PTY 1 Press and hold PTY (programme type) formore than 1 second while listening to an FMstation. The last selected PTY code appears. 2 Select one of PTY codes stored in presetnumber buttons (1 to 6). PTY search for your favorite programme starts ...

Page 14 - Other convenient RDS functions and adjustments; Changing the display mode while listening to an FM; Setting the TA volume level

14 ENGLISH Other convenient RDS functions and adjustments Changing the display mode while listening to an FM station You can change the initial indication on the display to station name (PS NAME), stationfrequency (FREQ), or clock time (CLOCK) while listening to an FM RDS station.• See also “Changin...

Page 15 - PTY codes; Automatic clock adjustment

15 ENGLISH SOCIAL: Programmes on socialactivities RELIGION: Programmes dealing withany aspect of belief or faith,or the nature of existence orethics PHONE IN: Programmes where peoplecan express their viewseither by phone or in apublic forum TRAVEL: Programmes about traveldestinations, package tours,...

Page 16 - TAPE OPERATIONS; Listening to a tape; Select the tape direction.; To stop play and eject the cassette

16 ENGLISH TAPE OPERATIONS Listening to a tape 1 Turn on the power. 2 Insert a cassette. When one side of the tape reaches its end during play, theother side of the tape automatically starts playing. (AutoReverse) 3 Select the tape direction. • Press both buttons at the same time. Each time you pres...

Page 17 - SOUND ADJUSTMENTS; Selecting preset sound modes

17 ENGLISH SOUND ADJUSTMENTS Selecting preset sound modes You can select a preset sound adjustment suitable to the music genre. Each time you press SOUND, the sound mode changes as follows. Indication For: Preset values Bass Treble Loudness SCM OFF (Flat sound) 00 00 On BEAT Rock or disco music +2 0...

Page 18 - Adjusting the sound; Select the item you want to adjust.

18 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –6 (min.) — +6 (max.) (Bass) TRE Adjust the treble –6 (min.) — +6 (max.) (Treble) FAD Adjust the front and rear speaker R6 (re...

Page 19 - Call up the sound mode you want to adjust.; Storing your own sound adjustments; Repeat the same procedure to store other settings.; To reset to the factory settings

19 ENGLISH 1 Call up the sound mode you want to adjust. See page 17 for details. 2 Select “BAS”, “TRE” or “LOUD.” Storing your own sound adjustments You can adjust the sound modes (BEAT, POP, SOFT: see page 17) to your preference andstore your own adjustments in memory. 3 Adjust the bass or treble l...

Page 20 - OTHER MAIN FUNCTIONS; Setting the clock

20 ENGLISH SEL 1 2, 3, 4 1, 5 2, 3, 4 1 Press and hold SEL (select) for more than 2 seconds toenter the general setting mode. 2 Set the hour. 1 Select “CLOCK H (Hour)” ifnot shown on the display. 2 Adjust the hour. 3 Set the minute. 1 Select “CLOCK M (Minute).” 2 Adjust the minute. OTHER MAIN FUNCTI...

Page 21 - Set the clock system.; To check the current clock time (changing the display mode)

ENGLISH 21 4 Set the clock system. 1 Select “24H/12H.” 2 Select “24H” or “12H.” 5 Start the clock. SEL To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows. • For FM RDS stations See page 14. • For AM a...

Page 22 - Basic Procedure; Changing the general settings; Select or adjust the item selected above.

22 ENGLISH You can change the items listed on the next page to your preference. Basic Procedure Changing the general settings 1 Press and hold SEL (select) for more than 2seconds to enter the general setting mode. 2 Select the item you want to adjust.(See page 23.) 3 Select or adjust the item select...

Page 24 - Selecting the initial CD information display; TIME

24 ENGLISH Selecting the initial CD information display You can select what type of the CD playback information to be initially shown on the displaywhen you start playing a CD. When shipped from the factory, the disc number and tracknumber information is selected to be shown.• DISC: Disc number and ...

Page 25 - Unlock the control panel.; Detaching the control panel

ENGLISH 25 How to attach the controlpanel 1 2 Note on cleaning the connectors: If you frequently detach the control panel, theconnectors will deteriorate.To minimize this possibility, periodically wipethe connectors with a cotton swab or clothmoistened with alcohol, being careful not todamage the co...

Page 26 - CD CHANGER OPERATIONS; Playing CDs; Select the CD automatic changer.

26 ENGLISH CD CHANGER OPERATIONS When used with a JVC CD automatic changer (separately purchased).We recommend that you use one of the CH-X series with your unit.If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENTdealer for connections. • For example, if your CD automatic...

Page 27 - To fast-forward or reverse the track

ENGLISH 27 7 8 9 10 11 12 To fast-forward or reverse the track To go to the next tracks or the previous tracks To go to a particular disc directly Press the number button corresponding to the disc number to start itsplayback (while the CD changer is playing).• To select a disc number from 1 – 6: Pre...

Page 28 - Selecting CD playback modes; To play back tracks at random (Random Play); Cancelled

28 ENGLISH Selecting CD playback modes MO/RND To play back tracks at random (Random Play) Each time you press MO/RND (mono/random) while playing aCD, CD random play mode changes as follows: Mode RND Indicator Plays at random RND1 Lights All tracks of the current disc, then the tracks ofthe next disc...

Page 29 - MAINTENANCE; To extend the lifetime of the unit; To clean the heads; To keep the tape clean

ENGLISH 29 MAINTENANCE To extend the lifetime of the unit This unit requires very little attention, but you will be able to extend the life of the unit if youfollow the instructions below. To clean the heads • Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available...

Page 30 - TROUBLESHOOTING

30 ENGLISH What appears to be trouble is not always serious. Check the following points before calling aservice center. Symptoms • A cassette tape cannot be inserted. • Cassette tapes become hot. • Tape sound is at very low level and sound quality isdegraded. • Sound is sometimes interrupted. • Soun...

Page 31 - AUDIO AMPLIFIER SECTION; SPECIFICATIONS

ENGLISH 31 AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 40 W per channelRear: 40 W per channel Continuous Power Output (RMS): Front: 16 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no morethan 0.8% total harmonicdistortion. Rear: 16 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no moretha...

Page 35 - FRANÇAIS; RACCORDEMENTS ELECTRIQUES; DEUTSCH; ELEKTRISCHE ANSCHLÜSSE; ELECTRICAL CONNECTIONS

B1 10 B3 B5 B7 B2 B4 B6 B8 A1 A5 A7 A2 A4 A6 A8 2 1 3 4 5 1 2 3 6 B1 B3 B5 B7 B2 B4 B6 B8 B1 B2 B8 B7 B3 B4 B5 B6 A8 A4 A7 A5 A2 A1 A5 A7 A2 A4 A6 A8 FRANÇAIS RACCORDEMENTS ELECTRIQUES Pour éviter tout cour t-circuit, nous vous recommandons dedébrancher la borne négative de la batterie et d’effectue...

Page 36 - FEHLERSUCHE

PRECAUTIONS on power supply and speakerconnections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriouslydamaged. • Connect the black lead (ground), yellow lead (to car battery, constant 12V), and red lead (to an accessory terminal) correctly....