Page 2 - ENGLISH; IMPORTANT FOR LASER PRODUCTS; BEFORE USE; How to reset your unit
2 ENGLISH INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipmen...
Page 3 - CONTENTS; CAUTION on Volume Setting:
3 ENGLISH CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit .............................. 2 LOCATION OF THE BUTTONS ..........
Page 4 - LOCATION OF THE BUTTONS; Control panel; Illumination Navigation for easy operations:; To use these controls for original functions again,
4 ENGLISH LOCATION OF THE BUTTONS Control panel 1 SRC (source) button 2 DISP (D) (display) button 3 5 (up) button 4 4 / ¢ buttons 5 Display window 6 • 0 (eject) button • (angle) button 7 BBE button Illumination Navigation for easy operations: If you use MODE (M) or SEL (select), the display and some...
Page 5 - Remote controller
5 ENGLISH Remote controller 1 • Turns on the unit if pressed when the unit is turned off. • Turns off the unit if pressed and held for a few seconds. • Drops the volume level in a moment if pressed briefly.Press again to resume the volume. 2 Changes the angle of the control panel to fourpositions. 3...
Page 6 - Preparing the remote controller; Installing the battery; Remove the battery holder.; Return the battery holder.
6 ENGLISH Preparing the remote controller Before using the remote controller:• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is noobstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing th...
Page 7 - BASIC OPERATIONS; Turning on the power; To drop the volume in a moment; To turn off the power; CD
7 ENGLISH BASIC OPERATIONS Turning on the power 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, thepower automatically comes on. You do not haveto press this button to turn on the power. 2 Select the source. Each time you press the button,the source change...
Page 8 - To cancel the display demonstration,; To activate the display demonstration,; Setting the clock
8 ENGLISH Canceling the displaydemonstration When shipped from the factory, displaydemonstration has been activated, and startsautomatically when no operations are done forabout 20 seconds.• It is recommended to cancel the demonstration before you use the unit for the first time. To cancel the displ...
Page 9 - Set the clock system.; Selecting the level meter; Meter 1
9 ENGLISH 5 Set the clock system. 1 Select “24H/12H.” 2 Adjust “24Hours” or “12Hours.” 6 Finish the setting. To check the current clock time when the unitis turned off, press DISP (D). The power turns on and the clock time is shownfor about 5 seconds, then the power turns off. Selecting the level me...
Page 10 - RADIO OPERATIONS; Listening to the radio; Start searching a station.; To stop searching before a station is received,; AM
10 ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manualsearching to tune in to a particular station. Searching a station automatically:Auto search 1 Select the band (FM1 – 3, AM). 1 Press SRC (source)repeatedly to select the tuner. 2 Press and hold SRC for...
Page 11 - Press and hold
11 ENGLISH Searching a station manually:Manual search 1 Select the band (FM1 – 3, AM). 1 Press SRC (source)repeatedly to select the tuner. 2 Press and hold SRC for morethan 1 second. 3 Within about 5 seconds, pressSRC again.Each time you press thebutton, the band changes. Note: This receiver has thr...
Page 12 - Storing stations in memory; FM station automatic preset: SSM
12 ENGLISH Storing stations in memory You can use one of the following two methods tostore broadcasting stations in memory.• Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM ...
Page 13 - Manual preset; Tuning in to a preset station; Selecting a preset station directly
13 ENGLISH Manual preset You can preset up to 6 stations in each band (FM1,FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) youwant to store stations into (in thisexample, FM1). 1 Press SRC (source)repeatedly ...
Page 14 - Changing the display pattern; • Initial display pattern:
14 ENGLISH Changing the display pattern B y p r e s s i n g D I S P ( D ) , y o u c a n c h a n g e t h e information shown on the display. Each time you press the button, thedisplay patterns change as follows: • Initial display pattern: • Assigned station name is emphasized: Selecting a preset stat...
Page 15 - CD OPERATIONS; Playing a disc; Open the control panel.; • This unit is also compatible with MP3 and; About MP3 and WMA discs; tracks; Hierarchy
15 ENGLISH CD OPERATIONS Playing a disc 1 Open the control panel. 2 Insert a disc into the loading slot. The unit draws thedisc, the control panelgoes back to theprevious position (seepage 45), andplayback startsautomatically. All tracks will be played repeatedly until you stopplayback. Notes: • MP3...
Page 17 - What is ImageLink; To fast-forward or reverse the track
17 ENGLISH Press ¢ briefly, while playing a disc, to go ahead tothe beginning of the next track.Each time you press the buttonconsecutively, the beginning ofthe next tracks is located andplayed back. Press 4 briefly, while playing a disc, to go back to the beginning of the current track.Each time yo...
Page 18 - How to go to the desired track quickly; Locating a track on a disc; To go to a track quickly
18 ENGLISH Track 6 \ 10 \ 20 \ 30 \ 31 \ 32 (Three times) (Twice) Track 36 \ 30 \ 20 \ 10 \ 9 \ 8 (Three times) (Twice) M MODE M MODE How to go to the desired track quickly • Ex. 1: To select track number 32 while playing track number 6 • Ex. 2 : To select track number 8 while playing track number 3...
Page 19 - Locating a folder on a disc; To go to a folder directly; To select a particular track in a folder,; To skip to the next or previous folder; (either on the same or different hierarchy levels)
19 ENGLISH 3 4 5 6 2 1 Locating a folder on a disc The following operations are only possiblewhen playing an MP3 or a WMA disc. To go to a folder directly IMPORTANT: To directly select the folders using the numberbutton(s), it is required that folders areassigned 2 digit numbers at the beginning oft...
Page 20 - ONLY on the remote controller:; To go back to the root directly,
20 ENGLISH To skip to the next or previous folderwithin a folder (on the same hierarchy level) ONLY on the remote controller: See the hierarchy diagram on page 15. 03 04 03 04 Press 3 (right) while playing a disc to skip to the next folder.Each time you press the buttonconsecutively, the next folder...
Page 21 - Folder name; To select a track and start playback; To select a folder and start playback
21 ENGLISH Folder name list Track name list 3 4 5 6 2 1 3 4 5 6 2 1 To select a track and start playback 1 Press and hold 5 (up) or ∞ (down) so that the folder name list of the inserteddisc appears on the display. The currently playing folder willbe highlighted on the display. 2 Show the track name ...
Page 22 - Selecting playback modes; To play back tracks at random (Random Play); Random Off; To play back tracks repeatedly (Repeat Play)
22 ENGLISH Selecting playback modes To play back tracks at random (Random Play) You can play back tracks on a disc (or in a folderfor MP3 and WMA discs) at random. 1 Press MODE (M) while playing a disc.“Mode” appears on the display,then the number buttons and the 5 (up)/ ∞ (down) buttons start flash...
Page 23 - Repeat Off; Prohibiting disc ejection; for more than 2 seconds.
23 ENGLISH For audio CD and CD Text discs: For MP3 and WMA discs: Mode Plays repeatedly Repeat Track : Current (or specified) track.• While playing, lights up on the display Repeat Folder * : All tracks of the current (orspecified) folder.• While playing, lights up on the display * “Repeat Folder” c...
Page 25 - DSP OPERATIONS; DSP; Selecting the DSP modes
25 ENGLISH DSP OPERATIONS SEL DSP Canceled iEQ SEL 1 Press SEL (select) once to show theDSP mode selection screen. The last selected DSP modescreen appears. • If you press the button twice or more, the unit enters different sound adjustmentmodes. • For iEQ (sound mode) settings, see pages 28 and 29....
Page 26 - Listening seat position:; To cancel the DSP modes,
26 ENGLISH To make further precise settings for theDSP modes You can also make further precise settings tomake the best sound field in your carcompartment. These settings you make are validfor all DSP modes except “V.CANCEL.” Setting items: The number of the built-in speakers : Select the number of ...
Page 27 - Select your listening seats position.; Middle
27 ENGLISH 2 Press number button 6 to enter thefurther precise setting screen. 3 Select your listening seats position. • Press number button 1 to select “LEFT (front left)” seat. • Press number button 2 to select “RIGHT (front right)” seat. • Press number button 3 to select “FRONT” seats. • Press nu...
Page 28 - EQUALIZER OPERATIONS
28 ENGLISH EQUALIZER OPERATIONS Selecting preset sound modes(iEQ: intelligent equalizer) You can select a preset sound mode (iEQ:intelligent equalizer) suitable to the music genre. Available sound modes: H. ROCK (Hard Rock) R & B (Rhythm and Blues) POP (Popular music) JAZZ (Jazz) DANCE (Dance mu...
Page 29 - Storing your own sound modes; Enter the sound adjustment mode.; Make adjustments as you like.; Store the adjustment you made.; If you want to cancel the adjustment,
29 ENGLISH Buttons used for adjustments Storing your own sound modes You can adjust the sound modes to your preferenceand store your own adjustments in memory(USER 1, USER 2 and USER 3). 1 Press SEL (select) twice to show thesound mode selection screen. The last selected sound mode iscalled up. 2 Pr...
Page 30 - SOUND ADJUSTMENTS; Indication; Sub Out; To adjust subwoofer output—Sub Out:
30 ENGLISH SOUND ADJUSTMENTS Performing the basic soundsettings You can set the speaker output balance,subwoofer output level, and input level of eachsource. • There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step 1 again. 1 Press SEL (s...
Page 31 - Select the effect level.; If the; BBE Off
31 ENGLISH Making sounds natural—BBE Digital BBE Digital * is a new digital processing method to restore the brilliance and clarity of the originallive sound in recording, broadcasts, etc.When a speaker reproduces sound, it introducesfrequency-dependent phase shifting, causinghigh-frequency sounds t...
Page 32 - GRAPHIC DISPLAYS; What is Image Converter; Install / Start the program; Import the images
32 ENGLISH GRAPHIC DISPLAYS What is Image Converter Image Converter is a JVC’s original software to produce a custom image to show on your JVC CarAudio. Here is a basic procedure to make a CD-R including still images (pictures) and animations(movies) with Image Converter In this manual, we only expl...
Page 33 - jml
33 ENGLISH M MODE CONTINUED ON THE NEXT PAGE 1 Open the control panel. 2 Insert a CD-ROM with the files (imagesand animations) into the loading slot. The unit draws thedisc, the control panelgoes back to theprevious position (seepage 45) • If the disc includes playable audio files such as MP3 tracks...
Page 34 - PowerOn; If you want to cancel the procedure,
34 ENGLISH Notes: • On this list, the folders including the target files—<jml> files for “Picture” and <jma>files for the others—are shown. • The display can show only six names at a time. You can show the other names on the next listsby pressing 5 (up) or ∞ (down). • If a disc inserted ...
Page 35 - Deleting unwanted files; To delete all the stored files at a time; Select a file you want to download.; To download a file
35 ENGLISH 3 4 5 6 2 1 The file name appears, and the unit willask you “Download OK?” Deleting unwanted files • When “BACK” is shown on the display above number button 5, you can go back to theprevious screen by pressing number button 5. To delete all the stored files at a time 1 Press MODE (M) whil...
Page 36 - To delete the file stored in
36 ENGLISH To delete the files stored for “PowerOn,”“PowerOff,” “Picture (all stored images ata time),” and “Movie” 1 Press MODE (M) while playing any source.“Mode” appears on the display, andthe number buttons and 5 (up)/ ∞ (down) buttons start flashing. 2 Press number button 6 to show the download...
Page 38 - Select a file you want.; To cancel all graphic displays,
38 ENGLISH To select a still image for graphicdisplay—User Picture You cannot select “UserPict.” as a PSM item inthe following cases:• If no image is stored in “Picture,” or• “UserPict” is not selected for the “Graphics” setting (see the left column). 1 Press and hold SEL (select) for morethan 2 sec...
Page 39 - Basic Procedure; Adjust the PSM item selected.; OTHER MAIN FUNCTIONS
39 ENGLISH Changing the general settings(PSM) You can change the items listed on the table onthe next page by using the PSM (PreferredSetting Mode) control.• The PSM items are grouped into five categories—MOVIE, CLOCK, DISP (display),TUNER, and AUDIO. Basic Procedure Ex. To change “Contrast” 1 Press...
Page 40 - UDIO
40 ENGLISH * 1 Displayed only after a downlaodable file is stored in memory. * 2 Displayed only after a downlaodable file is stored in memory and while selecting “UserPict.” for “Graphics.” * 3 Displayed only when “Dimmer” is set to “Time Set.” * 4 Only for KD-SH9700: Not displayed when the current ...
Page 43 - Selecting the dimmer mode
43 ENGLISH Selecting the dimmer mode You can dim the display at night automatically oras you set the timer.When shipped from the factory, Auto Dimmermode is activated. Note: Auto Dimmer equipped with this unit may not workcorrectly on some vehicles, particularly on thosehaving a control dial for dim...
Page 44 - Repeat steps; To erase the entered characters; Assigning names to the sources; Sources
44 ENGLISH 3 Select the character set you wantwhile the first character position isflashing. Each time you press the button,the character set changes asfollows: 4 Select a character. • About the available characters, see page55. 5 Move the cursor to the next(or previous) character position. 6 Repeat...
Page 45 - The control panel angles changes as follows:
45 ENGLISH Changing the control panelangle You can change the angle of the control panel tofour positions. 1 Press and hold 0 ( ) until the angle adjustment screen appears. The 5 (up) and ∞ (down) buttons start flashing to teachyou that they can be used for thenext operational steps. 2 Adjust the an...
Page 46 - Detaching the control panel; Unlock the control panel.; Attaching the control panel; Note on cleaning the connectors:
46 ENGLISH Detaching the control panel You can detach the control panel when leavingthe car.When detaching or attaching the control panel,be careful not to damage the connectors on theback of the control panel and on the panelholder. Detaching the control panel Before detaching the control panel, be...
Page 47 - CD CHANGER OPERATIONS; Playing discs
47 ENGLISH CD CHANGER OPERATIONS We recommend that you use the JVC MP3-compatible CD changer with your unit. By using this CD changer, you can play backyour original CD-Rs (Recordable) and CD-RWs(Rewritable) recorded either in audio CD formator in MP3 format.• You can also connect other CH-X series ...
Page 48 - When the current disc is an MP3 disc:; To change the display pattern; If you change the source or turn off the unit
48 ENGLISH To go to a particular disc directly Press the number button corresponding to thedisc number to start its playback (while the CDchanger is playing). • To select a disc number from 1 – 6: Press 1 (7) – 6 (12) briefly. • To select a disc number from 7 – 12: Press and hold 1 (7) – 6 (12) for ...
Page 51 - While playing a disc, press and hold; While playing an MP3 disc,
51 ENGLISH Selecting a disc/folder/trackusing the name lists To select a disc using the disc lists If you forget what discs are loaded in the CDchanger, you can show the disc name list andselect a disc in the list shown on the display.• The display can show only six names at a time. 1 While playing ...
Page 52 - For audio CD and CD Text discs:; To cancel Random Play,
52 ENGLISH Selecting playback modes To play back tracks at random (RandomPlay) You can play back tracks on a disc, on all loadeddiscs (or in a folder for MP3 discs) at random. 1 Press MODE (M) while playing a disc.“Mode” appears on the display,then the number buttons and the 5 (up)/ ∞ (down) buttons...
Page 53 - Repeat Disc
53 ENGLISH To play back tracks repeatedly (Repeat Play) You can play back a track, a disc (or a folder forMP3 discs) repeatedly. 1 Press MODE (M) while playing a disc.“Mode” appears on the display, thenthe number buttons and the 5 (up)/ ∞ (down) buttons start flashing. 2 Press number button 2, while...
Page 54 - EXTERNAL COMPONENT OPERATIONS; Playing an external component
54 ENGLISH EXTERNAL COMPONENT OPERATIONS SRC ATT 3 4 5 6 M 2 1 D SRC DISP ATT SEL BBE MODE 1 Select the external component(LINE IN). Each time you press thebutton, the source changesas described on page 7.When you select a source,the power automaticallycomes on. 2 Turn on the connected componentand ...
Page 55 - ADDITIONAL INFORMATION; Sound modes (preset frequency level settings); Capital letters; Sound
55 ENGLISH ADDITIONAL INFORMATION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • You can adjust the preset sound modes temporarily. However, your temporary adjustments will be reset when you select another sound mode. Ava...
Page 56 - TROUBLESHOOTING; Remedies; Causes; Symptoms; General
56 ENGLISH What appears to be trouble is not always serious. Check the following points before calling a servicecenter. TROUBLESHOOTING Remedies Stop playback while driving onrough roads. Change the disc. Check the cords andconnections. Set it to “On” (see page 42). Check the cords andconnections. I...
Page 57 - ybac
57 ENGLISH MP3/WMA Pla ybac k CD Chang er Causes You are trying to download ananimation of many frames. Temperature in the carcompartment is very low— (LOW TEMP.) indicator appears. No disc in the magazine. This unit is not connected to aCD changer correctly. MP3/WMA tracks do not havethe extension ...
Page 58 - MAINTENANCE; Handling discs; How to handle discs; When storing a disc into its case,; To keep discs clean
58 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs,CD-Rs (Recordable), CD-RWs (Rewritable), andCD Texts. • This unit is also compatible with MP3 and WMA discs. How to handle discs When removing a disc from itscase, press down the center holder of the cas...
Page 59 - SPECIFICATIONS; CD PLAYER SECTION; AUDIO AMPLIFIER SECTION
59 ENGLISH SPECIFICATIONS CD PLAYER SECTION Type: Compact disc playerSignal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo)Frequency Response: 5 Hz to 20 000 HzDynamic Range: 98 dB Signal-to-Noise Ratio: 102 dBWow and Flutter: Less than meas...
Page 60 - © 2003 VICTOR COMPANY OF JAPAN, LIMITED; Having TROUBLE with operation?; Refer to page of How to Reset; USA ONLY; Visit us on-line for; Technical Support & Customer Satisfaction Survey.; US RESIDENTS ONLY
0203MNMMDWJEIN J V C EN, SP, FR © 2003 VICTOR COMPANY OF JAPAN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! http://www. jvc m o bi ...
Page 61 - LOCALIZACION DE AVERIAS
53 mm 184 mm (7-1/4") (2-1/8") KD-SH9750KD-SH9700 Installation/Connection ManualManual de instalación/conexiónManuel d’installation/raccordement ESPAÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, consistemas eléctricos de masa NEGATIVA. INSTALACION (MONTAJE EN ELTABLERO DE IN...
Page 62 - RACCORDEMENTS ELECTRIQUES
2 • When installing the unit without using the sleeve• Instalación de la unidad sin utilizar la cubierta• Lors de l’installation de l’appareil sans utiliser de manchon In a Toyota for example, first remove the car radio and install the unit in its place. En un Toyota por ejemplo, primero extraiga la...
Page 64 - • Para el amplificador:; External component / Componente exterior / Appareil extérieur; External component; JVC Amplifier
4 INPUT R L LINE OUT (REAR) L R L R R L R L R L LINE OUT (FRONT) *3 *3 R L L L R R Usted podrá conectar un subwoofer a través de un amplificadorpara reforzar los graves. • Con respecto a sus conexiones, refiérase a las instruccionessuministradas con sus subwoofer. Vous pouvez connecter un caisson de...
Page 65 - ESPAÑOL; Una guía sobre MP3/WMA; FRANÇAIS; Un guide du format MP3/WMA; Multiple session
LVT1046-001A [J/C] 0203MNMMDWJEINEN, SP, FR ESPAÑOL Una guía sobre MP3/WMA FRANÇAIS Un guide du format MP3/WMA What are MP3/WMA? MP3 (MPEG Audio Layer 3) is one of digital audiocompression standards. • This player cannot play back MP3i and MP3 PRO formats. WMA (Windows Media ® Audio) is the digital ...
Page 66 - Questions and Answers; An MP3/WMA disc requires a long readout time...?; • The playback order may differ from your intended order; Elapsed playing time is not displayed correctly...?; Preguntas y respuestas; • El orden de reproducción puede ser distinto del orden; Questions et réponses; • L’ordre de lecture peut différer de l’ordre souhaité à
Questions and Answers An MP3/WMA disc requires a long readout time…? When an MP3/WMA disc is inserted, information inside thedisc (number of folders and files, and positions of data) isfirst read.So, in the following cases, a fairly long time may be neededbefore playback starts: • If the file struct...
Page 67 - IMPORTANT
IMPORTANT Notice the following information will help you to solve your problems.Keep this IMPORTANT sheet together with the INSTRUCTIONS. • After installing the unit = Follow the procedure Å described below. • If the unit does not operate = Follow the procedure Å described below. • If a disc is not ...
Page 68 - English; Activating the downloaded images and animations; To activate the animations stored for opening and ending screens; Español; Activación de imágenes y animaciones descargadas; Français; Mise en service des images et animations transférées
Addendum/Addenda/Addenda English Page 37 Activating the downloaded images and animations To activate the animations stored for opening and ending screens • Opening and ending screens will not be shown if the “KeyIn CFM” setting is set to “Short” or “Off.” (See page 41). Español Pàgina 37 Activación ...