JVC KD-G800 - Manuals

ENGLISH 5 Remote controller 3 • Selects the preset stations while listening to the radio.Each time you press the button, the presetstation number increases, and the selectedstation is tuned in. • Skips to the first file of the previous folder while listening to an MP3 or a WMA disc.Each time you pre...

ENGLISH 6 Preparing the remote controller Before using the remote controller:• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is noobstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting). Installing th...

7 ENGLISH 3 Adjust the volume. 4 Adjust the sound as you want.(See pages 23 – 25.) To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, andthe volume level will drop in a moment.To resume the previous volume level, press thebutton briefly ...

8 ENGLISH Canceling the displaydemonstration When shipped from the factory, displaydemonstration has been activated, and startsautomatically when no operations are done forabout 20 seconds.• It is recommended to cancel the display demonstration before you use the unit for thefirst time. To cancel th...

9 ENGLISH Setting the clock 1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(PSM: see pages 26 and 27.) 2 Set the hour. 1 Select “CLOCK HOUR” if not shown onthe display. 2 Adjust the hour. 1 2 3 Set the minute. 1 Select “CLOCK MINUTE”. 2 Adjust...

10 ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching or manualsearching to tune in to a particular station. Searching for a station automatically:Auto search 1 Select the band (FM1 – 3, AM). Each time you press thebutton, the band changes asfollows: * When “CLOCK...

11 ENGLISH 3 Tune in to a station you want while“M.SEEK” (manual seek) is still onthe display. • If you release your finger from the button, the manual mode will automatically turnsoff after 5 seconds. • If you hold down the button, the frequency keeps changing (in 200 kHz intervals forFM and 10 kHz...

12 ENGLISH 4 Repeat the above procedure to storeother stations into other presetnumbers. Notes: • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example,during ...

13 ENGLISH CD OPERATIONS Refer to “MP3/WMA OPERATIONS” on pages 18to 22 for operating MP3/WMA discs. Playing a CD 1 Open the control panel. Note on One-Touch Operation: When a CD is already in the loading slot,pressing CD/CD-CH LINE (for KD-AR800) orCD/CD-CH (for KD-G800) or CD (forKD-G700) turns on...

14 ENGLISH To go to the next or previous tracks To go to a particular track directly Press the number button corresponding to thetrack number to start its playback. • To select a track number from 1 – 6: Press 1 (7) – 6 (12) briefly. • To select a track number from 7 – 12: Press and hold 1 (7) – 6 (...

15 ENGLISH How to use the +10 and –10 buttons • Ex. 1: To select track number 32 while playing track number 6 • Ex. 2: To select track number 8 while playing track number 36 Selecting CD playback modes To play back tracks at random(Disc Random Play) You can play back all tracks on the CD atrandom. 1...

16 ENGLISH Prohibiting disc ejection You can prohibit disc ejection and can lock a discin the loading slot. While pressing CD/CD-CH LINE (forKD-AR800) or CD/CD-CH (for KD-G800)or CD (for KD-G700), press and hold for more than 2 seconds. “NO EJECT” flashes on the display for about5 seconds, and the d...

17 ENGLISH MP3/WMA INTRODUCTION What are MP3/WMA? MP3 is an abbreviation of Motion Picture ExpertsGroup (or MPEG) Audio Layer 3. MP3 is simply afile format with a data compression ratio of 1:10(128 Kbps*). WMA (Windows Media ® Audio) is the digital audio compression format developed byMicrosoft Corp...

18 ENGLISH Refer also to “CD OPERATIONS” on pages13 to 16. Playing a disc 1 Open the control panel. Note on One-Touch Operation: When a disc is already in the loading slot,pressing CD/CD-CH LINE (for KD-AR800) orCD/CD-CH (for KD-G800) or CD (forKD-G700) turns on the unit and starts playbackautomatic...

19 ENGLISH To stop play and eject the disc Press 0 . Playback stops and the control panel movesdown.The disc automatically ejects from the loadingslot. To change the display information While playing back an MP3/WMA file, you canchange the disc information shown on thedisplay. Press DISP (display) r...

21 ENGLISH To skip to the next or previous folder Note: If the folder does not contain any MP3/WMA files, itis skipped. Press 5 (up) while playing a disc to skip to the next folder.Each time you press the buttonconsecutively, the next folder islocated (and the first file in thefolder starts playing,...

23 ENGLISH SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to yourpreference. 1 Select the item you want to adjust. Each time you press thebutton, the adjustableitems change as follows: For KD-AR800/KD-G800: For KD-G700: Indication To do: Range FAD * 1 Adjust the front...

24 ENGLISH Selecting preset sound modes(iEQ: intelligent equalizer) You can select a preset sound mode (iEQ:intelligent equalizer) suitable to the music genre. • There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step 1 again. 1 Press MODE...

25 ENGLISH Storing your own soundadjustments You can adjust the sound modes to yourpreference and store your own adjustments inmemory (USER 1, USER 2 and USER 3). • There is a time limit in doing the following procedure. If the setting is canceled before youfinish, start from step 1 again. 1 Press M...

26 ENGLISH OTHER MAIN FUNCTIONS Changing the general settings(PSM) You can change the items listed in the table onpage 27 by using the PSM (Preferred SettingMode) control. Basic Procedure 1 Press and hold SEL (select) for morethan 2 seconds so that one of thePSM items appears on the display.(See pag...

31 ENGLISH Ex.: When you select CD as the source Maximum number ofcharacters Sources Assigning names to the sources You can assign names to station frequencies,CDs (both in this unit and in the CD changer),and external component (Line Input—only forKD-AR800).After assigning a name, it will appears o...

32 ENGLISH Changing the control panelangle You can change the angle of the control panel infour positions. Press (angle) repeatedly to adjust the angle of the control panel to the positionyou want. The control panel angles changes as follows: CAUTION: NEVER insert your finger in between thecontrol p...

33 ENGLISH Attaching the control panel 1 Insert the left side of the controlpanel into the groove on the panelholder. 2 Press the right side of the controlpanel to fix it to the panel holder. Note on cleaning the connectors: If you frequently detach the control panel, theconnectors will deteriorate....

34 ENGLISH CD CHANGER OPERATIONS Playing discs Select the CD changer (CD-CH). * For CD changer setting, see “To select the externalcomponent to use—EXTERNAL IN” on page 30 fordetails. • When the current disc is an MP3 disc: Playback starts from the first folder of thecurrent disc once file check is ...

37 ENGLISH Selecting the playback modes To play back tracks/files at random(Folder Random/Disc Random/MagazineRandom Play) 1 Press MODE to enter thefunctions mode while playing adisc. 2 Press RND (random), while“MODE” is still on the display.Each time you press the button,the random play mode change...

38 ENGLISH Mode Active Plays repeatedly indicator TRK RPT RPT indicator The current (orlights up. specified) track/file. FLDR RPT* and RPT All files of the indicators current (or specified) light up. folder of the currentdisc. DISC RPT and RPT All tracks/files of the indicators current (or specified...

39 ENGLISH EXTERNAL COMPONENT OPERATIONS This section is only for KD-AR800/KD-G800. Playing an external component For KD-AR800: You can connect an external components to theLINE IN plugs on the rear.• You can also connect the SIRIUS tuner to the CD changer jack on the rear and select it asthe extern...

40 ENGLISH Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. Sound Mode Preset equalizing values LOW LOW LOW MID MID HI HI LEVEL FREQ WIDTH LEVEL WIDTH LEVEL FREQ FLAT 00 60Hz 1 00 1 00 8kHz HARD ROCK +03 120Hz 4 00 1 +02 8kHz...

41 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a servicecenter. Remedies Adjust it to the optimum level. Check the cords andconnections. Press the reset button on thecontrol panel. (The clock settingand preset stations stored in...

44 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce CDs,CD-Rs (Recordable), CD-RWs (Rewritable), andCD Texts. • This unit is also compatible with MP3 and WMA discs. How to handle discs When removing a discfrom its case, press down the center holder of the cas...

45 ENGLISH SPECIFICATIONS CD PLAYER SECTION Type: Compact disc playerSignal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo)Frequency Response: 5 Hz to 20 000 HzDynamic Range: 96 dB Signal-to-Noise Ratio: 98 dBWow and Flutter: Less than measu...

EN, SP, FR 1203KKSMDTJEIN © 2003 VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! http://www. jvc m o bi le .c o m Visit us on-line for Technica...

KD-AR800/KD-G800/KD-G700 Installation/Connection ManualManual de instalación/conexiónManuel d’installation/raccordement 1203KKSMDTJEINEN, SP, FR GET0197-002A [J] K Handles Manijas Poignées G Washer (ø5) Arandela (ø5) Rondelle (ø5) H Lock nut (M5) Tuerca de seguridad (M5) Ecrou d’arrêt (M5) I Mountin...

When installing the unit without using the sleeve / Instalación de la unidad sin utilizarla cubierta / Lors de l’installation de l’appareil scans utiliser de manchon In a Toyota for example, first remove the car radio and install the unit in its place. En un Toyota por ejemplo, primero retire la rad...

3 * 2 Before checking the operation of this unit prior toinstallation, this lead must be connected, otherwisepower cannot be turned on. * 2 Antes de comprobar el funcionamiento de esta unidadprevia a de la instalación, es necesario conectar estecable, de lo contrario no se podrá conectar laalimentac...

L R L R L R L R L R L R L R * 3 R L LINE REAR FRONT OUT R L R L INPUT * 3 INPUT R L 4 You can connect an amplifier and other equipment to upgradeyour car stereo system.• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled throughthi...