JVC KD-DV5100 - Manuals

5 ENGLISH Other disc operations ..................... 29 Basic operations ..................................... 29Changing the display information ......... 30Selecting the playback modes ................ 31 Dual Zone operations ..................... 32 Listening with headphones .......................

6 ENGLISH Introduction — Playable discs Discs you can play You can play back the following discs—12 cm (4-3/4") and 8 cm (3-3/16")—on this receiver:• DVD Video: Recorded in NTSC color system with Region Code “1” (see below). – DVD-R/DVD-RW recorded in the DVD- Video format can also be played...

7 ENGLISH Control panel 1 5 (up) / ∞ (down) buttons • Function as Play / Stop buttons for DVD and VCDs. 2 E EQ (equalizer) button 3 D DISP (display) button 4 S SEL (select) button 5 • Control dial • (standby/on attenuator) button 6 Display window 7 Remote sensor 8 0 (eject) button 9 4 / ¢ buttons p ...

8 ENGLISH Remote controller — RM-RK230 Remote sensor Main elements and features IMPORTANT: For KD-ADV6160: If Dual Zone is activated (see page 32), the remote controller only functions for operating the DVD/CD player. MONITOR CONTROL 1 Monitor control buttons* 1 • (standby/on), MODE, ASPECT, MENU, a...

9 ENGLISH 4 BAND button • Selects the FM/AM/SIRIUS ® bands. 5 TOP M (menu) button* 2 • Display the DVD and VCD* 3 disc menu. 6 DUAL button* 4 • Activate and deactivate Dual Zone. 7 VOL + / – buttons • Adjusts the volume level. • Also function as 2nd VOL +/– buttons when pressed with SHIFT button* 4 ...

10 ENGLISH ~ Ÿ You cannot select some sources if they are not ready. ! For FM/AM tuner only For SIRIUS ® radio only ⁄ Adjust the volume. Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 33 and 34.) To drop the volume in a moment (ATT) To restore the sound, pres...

11 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 35. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select...

12 ENGLISH To tune in to a station manually In step ! on the left column... 1 2 Select the desired station frequencies. Radio operations Listening to the radio ~ Ÿ Selected band appears. Lights up when receiving an FM stereo broadcast with sufficient signal strength. ! Start searching for a station....

13 ENGLISH When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can p...

14 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 2 3 4 Preset number flashes for a while. To check the current clock time while listening to an FM or AM station * If no title is assigned to a station, “NO NAME” appears. To assign a title to...

15 ENGLISH Before performing any operations, make sure the following.... • Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the audio CD, CD Text, and MP3/WMA playback by referring to the monitor screen. (See pages 24 and 25.) • For DVD playback, you can...

16 ENGLISH • When inserting a DVD disc: • When inserting an MP3/WMA disc: * 1 Either the MP3 or WMA indicator lights up depending on the detected file. * 2 Does not light up for DVD-R/DVD-RW. • When inserting a VCD: • When inserting a CD Text/audio CD: To eject the disc Total folder number Total tra...

17 ENGLISH Basic operations Operations Display indication and/or next operation To stop play temporarily “PAUSE” illuminates on the display. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback.• When playing a VCD, Reverse Slow M...

18 ENGLISH To locate a particular title/chapter/track directly • For DVD: During play or pause—select a chapter. During stop—select a title. • For VCD: While PBC (see page 20) is not in use. • For MP3/WMA: Select a track within the same folder. Select the number corresponding to the item you want (s...

19 ENGLISH DVD/VCD special functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor.• You can set the initial subtitle language using the setup menu (see page 27). Ex.: When the disc has 3 options Selecting audio languages For DVD: You can select the langu...

20 ENGLISH Canceling the PBC playback 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function Zoom in 1 2 Move the zoomed-in portion. To cancel zoom, select “ZOOM OFF” in step 1 . Disc menu operations Menu-driven playback is possible while playin...

21 ENGLISH About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar.• For audio CD, CD Text, and MP3/WMA disc you can also use the control screen and list screen (see pages 24 and 25). On-Screen bars DVD DVD -V 2ch T 02 -C 03 TOTAL 1:25:58 TIME TITL...

22 ENGLISH Basic on-screen bar operations 1 Display the on-screen bar. • For DVD/VCD: • For other discs: 2 Select an item. 3 Make a selection. • If pop-up menu appears.... 1 or 2 (twice) To erase the on-screen bar • The selectable options for Repeat/Intro/ Randam plays: OFF Repeat play DVD: OFF CHAP...

23 ENGLISH INTRO Intro play VCD (while PBC is not in use): (Canceled) INTRO MP3/WMA: INTRO TRACK INTRO FOLDER (Canceled) CD Text/audio CD: INTRO TRACK (Canceled) RANDOM Random play VCD (while PBC is not in use): (Canceled) RANDOM MP3/WMA: RANDOM DISC RANDOM FOLDER (Canceled) CD Text/audio CD: RANDOM...

24 ENGLISH To select a folder or track 1 Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. CD Text/audio CD control screen 1 Elapsed playing time of the current track 2 Operation mode icon ‰ (play), 7 (stop), 8 (pause), ¡ (fast- forward), 1 (reverse) 3 Curre...

25 ENGLISH For MP3/WMA: While stop... 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. 2 Select a folder on the list. The track list of the selected folder appears. To go back to the folder list 3 Select a track on the list. For CD Text/audio CD: Whil...

26 ENGLISH You can store the initial disc playback status.• While playing, no change can be made on the setup menu. Basic setting procedure While stop... 1 2 Ex.: When selecting the “AUDIO” menu 3 Select an item you want to set up. Ex.: When selecting “DOWN MIX” 4 5 Select an option. 6 To set other ...

27 ENGLISH To be continued.... LANGUAGE menu Item Contents MENU LANGUAGE Select the initial disc menu language. AUDIO LANGUAGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCREEN LANGUAGE Select the language for the Setup menu and s...

28 ENGLISH AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, see page 54.• PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or con...

29 ENGLISH To be continued.... In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic operations To stop playback To start playback again To eject a disc To fast-forward or reverse the chapter/track Fast-forwards. Reverses. * The searc...

30 ENGLISH To go to a chapter/track quickly • For DVD: During play or pause.• For VCD: While PBC (see page 20) is not in use. • For MP3/WMA: Select a track within the same folder. 1 2 First time you press 5 or ∞ button, the chapter/track skips to the nearest higher or lower chapter/track with a numb...

31 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play • For DVD: During play or pause.• For VCD: While PBC (see page 20) is not in use. Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode ...

32 ENGLISH Only for KD-ADV6160 Listening with headphones By connecting headphones to the 2nd AUDIO OUT plug on the rear, you can listen to the playback sound through the DVD/CD player while listening to another source through the speakers.You can activate Dual Zone while listening to any source.• Wh...

33 ENGLISH Indication pattern for each sound mode: Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. Ex.: When “ROCK” is selected HIP HOP POPS ROCK USER CLASSIC JAZZ 4 Adjust the level (–05 to +05). 5 Repeat steps 3 and 4 to adjust the oth...

34 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 * 1 Only for KD-ADV6160 Ex.: When “FAD” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range FAD* 2 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to...

35 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items (except for SID) listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessar...

38 ENGLISH Assigning titles to the sources You can assign titles to station frequencies and CDs (both in this receiver and in the CD changer). Sources Maximum number of characters FM/AM tuner Up to 8 characters (up to 30 station frequencies) DISC/CD-CH Up to 32 characters (up to 30 discs) • You cann...

39 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control...

40 ENGLISH CD changer operations ~ * If you have changed “EXT IN” setting to “EXT IN” (see page 37), you cannot select the CD changer. Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP...

41 ENGLISH To be continued... To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 discs) To next folders. To pr...

42 ENGLISH 2 First time you press 5 or ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th).Then each time you press the button, you can skip 10 tracks.• After the last track, the first track will be selected and vice versa. 3 Chan...

44 ENGLISH External component operations Playing an external component You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied), LINE IN plug on the rear, or AUX (auxiliary) input jack on the control panel. • For connection, see Inst...

45 ENGLISH SIRIUS ® radio operations About SIRIUS radio SIRIUS is a satellite radio that can deliver digital-quality sound.SIRIUS has 65 music channels which are all commercial-free and 50 channels of sports, news, and entertainment programs. You can enjoy and control the SIRIUS radio digital entert...

46 ENGLISH ~ Ÿ ! Select a category. You can tune in to all the channels of every category by selecting “ALL.”Selecting a particular category (SPORTS, ENTERTAINMENT, etc.) allows you to enjoy only the channels from the selected category. Listening to the SIRIUS ® radio ⁄ Select a channel for listenin...

47 ENGLISH Storing channels in memory You can preset six channels for each band. Ex.: Storing a channel into preset number 4. 1 Perform steps ~ to ⁄ on page 46, to tune in to a channel you want. 2 Preset number flashes for a while. Listening to a preset channel 1 2 3 Select the preset channel (1 – 6...

48 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New d...

49 ENGLISH Language codes Code Language Code Language Code Language AAABAFAMARASAYAZBABEBGBHBIBNBOBRCACOCSCYDZELEOETEUFAFIFJFOFYGAGDGLGNGUHAHIHRHUHYIAIE AfarAbkhazianAfrikaansAmeharicArabicAssameseAymaraAzerbaijaniBashkirByelorussianBulgarianBihariBislamaBengali, BanglaTibetanBretonCatalanCorsicanCz...

50 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Selecting the sources • When no disc is loaded in the receiver, “DISC” cannot be selected. • Without connecting to the CD changer or the SIRIUS radio, “CD-C...

51 ENGLISH To be continued.... • Some DVD-R/DVD-RW or CD-R/CD-RW may not play back on this receiver because of their disc characteristics, and for the following causes: – Discs are dirty or scratched. – Moisture condensation occurs on the lens inside the receiver. – The pickup lens inside the receiv...

52 ENGLISH DVD setup menu • When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming. • While playing...

53 ENGLISH About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 28.) • Through DIGITAL OUT (optica...

54 ENGLISH Output signals through the DIGITAL OUT terminal Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 28). DIGITAL AUDIO OUTPUT Output Signals Playback Disc STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD 48 kHz, 16/20/24 bits Linear PCM 48 kHz...

55 ENGLISH To be continued.... Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the opti...

56 ENGLISH Symptoms Causes Remedies Disc playback • Sound and picture are sometimes interrupted or distorted. You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections. • No playback pict...

57 ENGLISH To be continued.... Symptoms Causes Remedies MP3/WMA playback • A longer readout time is required. Readout time varies due to the complexity of the folder/file configuration. Do not use too many hierarchies and folders. • Tracks cannot be played back as you have intended them to play. Pla...

59 ENGLISH Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω ) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 15 kHz L...

Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! © 2004 Victor Company of Japan, Limited EN, SP, FR 1204DTSMDTJEIN Rear_KD-ADV6160[J]f.indd 2 Rear_KD-ADV6160[J]f.indd ...

KD-ADV6160/KD-DV5100 Installation/Connection ManualManual de instalación/conexiónManuel d’installation/raccordement GET0277-002A [J] 1204DTSMDTJEINEN, SP, FR 1 ENGLISH This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a v...

2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits.• If you are not sure how to install this receiver correctly, have it...

3 ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the receiver.• Be sure to ground this receiver to the car’s chassis again after installation. Notes: • Replace the fuse with one ...

ENGLISH ESPAÑOL FRANÇAIS 4 A Typical Connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver.The leads of the power cord and those of the connector from the car body may be ...

5 B Connecting the parking brake wire / Conexión del cable del freno de estacionamiento / Connexion du cordon de frein de stationnement When installing the monitor in a location where it can be seen by the dirver Connect the parking brake wire to the parking brake system built in the car. When insta...

6 E Connecting the external amplifiers / Conexión a los amplifi cadores externos / Connexion d’amplifi cateurs extérieurs You can connect amplifiers to upgrade your car stereo system.• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be contro...