JVC HV-Z29V1, HV-Z34L1 - Manuals

Page 2 - BACK

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, gras...

Page 3 - Setting up your TV; CAUTION; Connecting the woofer unit

3 HV-Z34L1/29V1/ LCT1457-001A / English Setting up your TV CAUTION • Turn off all the equipment including the TV before connecting anything. 1 Connecting the woofer unit (only for HV-Z29V1) 1 Fitting the woofer unit Align the projection on the base of the woofer unit with the hole in the top of the ...

Page 4 - Making the initial settings; Press the main power button on the TV.

4 HV-Z34L1/29V1/ LCT1457-001A / English Setting up your TV 3 Connecting the power cord Connect the mains plug to the AC outlet. 4 Putting the batteries into the remote control Use two AA/R6 batteries. Insert the batteries from the - end, making sure the + and - polarities are correct. • Follow the w...

Page 6 - TV buttons and functions; Press the main power button; To turn the main power off:; Press the TV/VIDEO button

6 HV-Z34L1/29V1/ LCT1457-001A / English TV buttons and functions Turn the main power on Press the main power button 1 . The POWER lamp 2 lights red and your TV is in the standby mode. To turn the main power off: Press the main power button again. The POWER lamp 2 goes off. Turn the TV on from standb...

Page 8 - Remote control buttons and functions; Turn the TV on from standby; Press the; Choose a TV channel; Press the CHANNEL

8 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions Turn the TV on from standby mode Press the # button. The POWER lamp lights red to green and your TV will be turned on. • You can turn on the TV from the standby mode by pressing the TV/VIDEO button, the CHANNEL p buttons or...

Page 9 - To return to a TV channel:; ZOOM button; Press the ZOOM button to display the; CINEMA SURROUND button

9 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions Adjust the volume Press the VOLUME-/+ buttons. Watch images from an external device Choose a VIDEO terminal to which the external device has been connected. Press the TV/VIDEO button. • You can choose a VIDEO terminal with ...

Page 10 - SOUND MODE button; Press the SOUND MODE button to select; BASS button

10 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions MONO: Select the MONO mode, when you listen to the mono sound.You can enjoy the sound for a wider audience similar to stereo sound. OFF: The CINEMA SURROUND function switches off. SOUND MODE button You can select the SOUND...

Page 11 - RETURN function; DISPLAY button

11 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions RETURN function The TV temporarily memorises the TV channel that was chosen right before the current TV channel as the “Last Channel”. By pressing the RETURN+ button, you can alternately view the current TV channel and the...

Page 12 - Twin and PIP (picture in

12 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions • If the chosen channel is already registered as the favorite channel, when a colour button is pressed, the registered colour button icon appears on the top right of the screen. • You cannot register in the Text mode, or w...

Page 13 - To return to the normal screen:; Listening to the sound of the; For the main picture:; Swapping the pictures

13 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions PIP (picture in picture) mode Press .Each time it is pressed the mode changes as shown below. To return to the normal screen: Press the or again, or press the BACK button. • The and buttons do not work in the Text mode. • ...

Page 14 - Multi-picture function

14 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions Changing the sub picture position (in PIP mode only) You can position the sub picture to one of corners of the main picture. Press the ( Position) button. Each time you press the button, the sub picture moves clockwise (...

Page 15 - Freeze function; Press the; Strobe function; Press the STROBE button.

15 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions Freeze function 1 Set the PIP/TV/DVD switch to the PIP position. 2 Press the ( Freeze) button. Still picture is captured and displayed on the right side of the screen. On the left, the moving picture is displayed. While wa...

Page 16 - To return to the TV mode:

16 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions Operating a JVC brand DVD player You can operate a JVC brand DVD player. Pressing the button having the same appearance as the original remote control button of a device makes the function work in the same way as the origi...

Page 17 - To cancel the Hold function:; button

17 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions (Hold) button You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the ( Hold) button. The (hold) are displayed at the top left of the screen...

Page 18 - Using the List mode; The stored page numbers are displayed; Press a colour button to choose a; The four page numbers blink white to; Press a colour button to which a page; To exit the List mode:

18 HV-Z34L1/29V1/ LCT1457-001A / English Remote control buttons and functions Using the List mode You can store the numbers of your favorite teletext pages in memory and call them up quickly using the colour buttons. To store the page numbers:1 Press the F.T/L button to engage the List mode. The sto...

Page 19 - Using the TV’s menu

19 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu This TV has a number of functions you can operate using menus.To fully utilize all your TV’s functions, you need to understand the basic menu operating techniques fully. Buttons used to operate the menus 1 Press the H button to display the...

Page 20 - PICTURE menu; PICTURE MODE; CONTRAST

20 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu Operation with the buttons on the TV You can also operate the menus using the buttons on the front panel of the TV. • The OK button acts as the MENU button when the menu bar is not displayed, and as the OK button when the menu bar is displ...

Page 21 - WHITE BALANCE; FEATURES menu; DIGITAL VNR

21 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu TINT You can adjust the picture tint. 2 : reddish 3 : greenish • You can change the TINT setting (picture tint) only when the colour system is NTSC 3.58 or NTSC 4.43. To return to the default settings in each PICTURE MODE: Press the blue b...

Page 22 - Super DigiPure; Picture motion compensation function:; PULL DOWN

22 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu MAX: The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO(HIGH) but still notice some noise, change the setting from AUTO(HIGH) to MAX. • The MAX setting is not suitable for high-quality pi...

Page 24 - SOUND menu

24 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu ZOOM You can change the screen size according to the picture aspect ratio. Choose the optimum one from three ZOOM modes. 1 Choose ZOOM, then press the OK or 3 button. 2 Press the 6 buttons to choose a ZOOM mode. Then press the OK button....

Page 26 - SLEEP TIMER; To cancel this function:; CHANNEL GUARD

26 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu FEATURES menu SLEEP TIMER You can set the TV to automatically turn off after a set time. 1 Choose SLEEP TIMER, then press the OK or 3 button. 2 Press the 5 buttons to set the period of time. The TV begins count down from the set time.• Y...

Page 27 - APPEARANCE

27 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu To cancel this function: Press the blue button again. n (CHANNEL GUARD) disappears and the lock is released. 6 Press the OK button to complete the setting. The menu disappears. To view a locked TV channel:1 Choose a programme number in whi...

Page 29 - SETUP menu; AUTO PROGRAM

29 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu 3 Press the 6 button to choose VIDEO, then press the 5 button to choose one of video inputs, VIDEO-1 to -4. 4 Set the picture effect. Press the 6 button to choose an item listed in the following table and press the 5 button to choose one o...

Page 30 - OK or

30 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu • You can proceed to edit the programme numbers list using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page 30 • If a TV channel you want to view is not stored in the programme numbers list, you can register it using the MA...

Page 31 - FUNCTIONS; To cancel the MOVE function:

31 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu FUNCTIONS MOVE1 Press the 6 buttons to choose a TV channel. 2 Press the 3 button to start the MOVE function. 3 Press the 6 buttons to choose a new programme number. To cancel the MOVE function: Press the BACK button. 4 Press the 2 button t...

Page 32 - To cancel the INSERT function:

32 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu 3 Press the 3 button to choose the system (sound system) for a TV channel you want to register. • For the sound systems in each country or region, refer to the table below: 4 Press the green or red button to search for a TV channel. Scanni...

Page 34 - TELETEXT LANGUAGE

34 HV-Z34L1/29V1/ LCT1457-001A / English Using the TV’s menu TELETEXT LANGUAGE There are four types of teletext language groups. Set the teletext language group that corresponds to the language of the teletext program that you want to watch. 1 Choose TELETEXT LANGUAGE, then press the OK or 3 butto...

Page 36 - Additional preparation; Connecting the external; Before connecting anything:; • Read the manuals provided with the

36 HV-Z34L1/29V1/ LCT1457-001A / English Additional preparation Connecting the external devices Connect the devices to the TV, payingattention to the following connectiondiagram. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection meth...

Page 37 - Connecting methods; • If you have a DVD player that outputs; Connecting devices to the; • When you turn off the TV, the signals

37 HV-Z34L1/29V1/ LCT1457-001A / English Additional preparation Connecting methods 1 Connect the TV’s VIDEO jack and the device’s VIDEO OUT (video output) jack with a video cable. If connecting a device to the TV with an S-VIDEO cable: Connect the VCR’s S-VIDEO OUT (S-VIDEO output) connector and the...

Page 40 - Troubleshooting; If you cannot turn on the TV; If you cannot turn off the TV; Poor picture

40 HV-Z34L1/29V1/ LCT1457-001A / English Troubleshooting If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or...

Page 42 - Other concerns

42 HV-Z34L1/29V1/ LCT1457-001A / English Troubleshooting Other concerns • When the AUTO SHUTOFF function operates, the TV is automatically turned off.If the TV is turned off suddenly, try to press the # button to turn on the TV once again. At this time, if the TV resumes a normal state, there is n...

Page 43 - Specifications; Design and specifications subject to change without notice.

43 HV-Z34L1/29V1/ LCT1457-001A / English Specifications Design and specifications subject to change without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the conse...

INSTRUCTIONS COLOUR TELEVISION HV-Z34L1HV-Z29V1 Contents LCT1460-001A-H1103-CR-JMT © 2003 VICTOR COMPANY OF JAPAN, LIMITED Setting up your TV. . . . . . . . . . . . . . . . . . 3TV buttons and functions. . . . . . . . . . . . . 6Remote control buttons and functions . . . 8Using the TV’s menu . . . ....