JVC HR-V600AG - Manuals - manualsarea.com

Page 2 - Front Panel

Page 2 May 29, 2003 2:34 pm — 2 — G- CODE and S HOW V IEW are different trademarks used to represent the same easy recording feature. However, for simplicity, only the term G- CODE will be used in the instructions. If you use S HOW V IEW system, follow the same steps listed for the G- CODE system (F...

Page 3 - Remote control; Basic Connections; RF Connection; Installing/Removing the lithium battery

Page 3 May 29, 2003 4:21 pm — 3 — Remote control * Not function with this recorder. On-screen display If you press OK on the remote control when “O.S.D.” is set to “ON” ( 墌 10), you can see the current recorder status on the TV screen. To clear the on screen display, press OK again. The indications ...

Page 4 - Initial Settings; Video Channel Set

Page 4 May 29, 2003 2:34 pm — 4 — B Open the battery cover while pressing the release tab as illustrated. C Insert a lithium battery with the plus (+) side up and push it in. ● To remove the lithium battery, press the latch downward using a pointed non-metallic object, then pull out the lithium batt...

Page 5 - Playback; Basic Playback

Page 5 May 29, 2003 2:34 pm — 5 — Language Setting A Access Main Menu screen, then Initial Set screen Press MENU on the remote control. Press rt to place the pointer next to “INITIAL SET”, then press OK or e . B Access Language Select screen Press rt to place the pointer next to “LANGUAGE”, then pre...

Page 6 - Playback Features; Soundtrack Selection

Page 6 May 29, 2003 2:34 pm — 6 — Playback Features Adjusting tracking condition— tracking adjustment Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback....

Page 7 - Recording; Basic Recording; Recording Features; Watching one program while recording another

Page 7 May 29, 2003 2:34 pm — 7 — Recording Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact. If no...

Page 8 - Timer Recording; System Setup; Guide Program Number Set; Timer

Page 8 May 29, 2003 2:34 pm — 8 — Timer Recording Up to 8 timer recording programs can be made using G- CODE / S HOW V IEW timer programing (for HR-V600AG only) or Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer. NOTES: ● ...

Page 9 - Express Timer Programing; Program overlap warning display

Page 9 May 29, 2003 2:34 pm — 9 — Express Timer Programing ● Remember, the clock must be set before you can program the timer. ● Load a cassette with the record safety tab intact. The recorder turns on, and the counter is reset, automatically. ● Select the appropriate colour system with “PAL/MESECAM...

Page 10 - Other Functions; Checking tape position

Page 10 May 29, 2003 2:34 pm — 10 — Other Functions Checking tape position When you change the recorder operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Search or Instant Review, the tape position indicator appears.The position of “ q ” in relation to “0...

Page 11 - Satellite Auto Recording; Multi-Brand Remote Control; TV Brand Setting

Page 11 May 29, 2003 2:34 pm — 11 — AUTO SP ] LP TIMER — ON / OFF When this function is set to “ON”, the recorder automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire program while timer-recording in SP mode. For Example, Recording a PAL-broa...

Page 12 - Changing Remote Control Code; Editing

Page 12 May 29, 2003 2:34 pm — 12 — Changing Remote Control Code This remote control is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. This remote control is preset to send A code signals because your reco...

Page 13 - Information on Multi-System Compatibility

Page 13 May 29, 2003 2:34 pm — 13 — Information on Multi-System Compatibility Off-Air Recording The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K and NTSC broadcasts. Playback This recorder can play back all 3 types of recorded tape. NOTES: When viewin...

Page 14 - Tuner Setting; Auto Channel Set; Manual Channel Set

Page 14 May 29, 2003 2:34 pm — 14 — Tape-To-Tape Editing There are 4 different types of recorded tape, depending on the signal recorded. Tuner Setting IMPORTANT Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function or if you have moved to a different...

Page 16 - Specifications

Page 16 May 29, 2003 2:34 pm — 16 — Specifications Specifications shown are for SP mode unless specified otherwise.E. & O.E. Design and specifications subject to change without notice. GENERAL Power requirement Rating : AC 110 V – 240 V d , 50 Hz/60 Hz Operating : AC 90 V – 260 V d , 50 Hz/60 Hz...