JVC HR-V400AG - Manuals - manualsarea.com

Page 4 - Basic Connections; RF Connection; Initial Settings; Video Channel Set

Page 4 July 17, 2003 8:53 am — 4 — Basic Connections A Check contents Make sure the package contains all of the accessories listed in “Specifications” ( 墌 16). B Situate recorder Place the recorder on a stable, horizontal surface. C Connect recorder to TV RF Connection A Disconnect the TV aerial cab...

Page 6 - Playback; Basic Playback; Playback Features

Page 6 July 31, 2003 2:51 pm — 6 — Playback Basic Playback A Load a cassette Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the recorder. ● Do not apply too much pressure when inserting. ● The recorder turns on, and t...

Page 7 - Recording; Basic Recording

Page 7 July 17, 2003 8:53 am — 7 — Playing back tape repeatedly (100 times)— Repeat Play During playback, press and hold 4 for more than 5 seconds. The play indicator ( $ ) on the display panel starts blinking slowly. To stop playback, press 8 on the remote control or 0 on the recorder. NOTE: Pressi...

Page 8 - Recording Features; Watching one program while recording another; Timer Recording; Express Timer Programing

Page 8 July 17, 2003 8:53 am — 8 — Recording Features Specifying recording length— Instant Timer Recording (ITR) During recording, press 7 on the recorder repeatedly until the recording length you want appears on the display panel. The record indicator ( 䡬 ) on the display panel starts blinking. ● E...

Page 9 - Program overlap warning display

Page 9 July 17, 2003 8:53 am — 9 — To use the recorder while it is in timer recording standby mode Press # , then press 1 . After you use the recorder, press # again to put the recorder into timer recording standby mode. Checking, cancelling or changing program settings A Disengage timer Press # , t...

Page 10 - Other Functions; Checking tape position

Page 10 July 17, 2003 8:53 am — 10 — Other Functions Checking tape position When you change the recorder operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Search or Instant Review, the tape position indicator appears.The position of “ q ” in relation to “...

Page 11 - Editing

Page 11 July 17, 2003 8:53 am — 11 — 䡵 AUTO TIMER — ON / OFF ● When this function is set to “ON”: The timer recording standby mode is automatically engaged when the recorder is turned off. It is temporarily canceled when the recorder is turned on. You do not have to press # to engage or disengage th...

Page 12 - Information on Multi-System Compatibility

Page 12 July 17, 2003 8:53 am — 12 — Information on Multi-System Compatibility Off-Air Recording The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts. Playback This recorder can play back all 3 types of recorded tape. NOTE: When viewing NTSC ta...

Page 14 - Tuner Setting; Auto Channel Set; Manual Channel Set

Page 14 July 17, 2003 8:53 am — 14 — Tuner Setting IMPORTANT Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function or if you have moved to a different area or if a new station starts broadcasting in your area. Your recorder needs to memorise all nece...

Page 16 - Specifications

Page 16 July 17, 2003 8:53 am — 16 — Specifications *Not provided in certain areas. Specifications shown are for SP mode unless specified otherwise.E. & O.E. Design and specifications subject to change without notice. GENERAL Power requirement Rating : AC 110 V – 240 V d , 50 Hz/60 Hz Operating ...