JVC HR-S9911U - Manuals

— 5 — On-Screen Display If you press OSD or OK on the Remote when “SUPERIMPOSE” is set to “ON” ( 墌 pg. 20), you can see the current VCR status on the TV screen.The indications are not recorded even if the VCR is in the recording mode. A VCR operation mode B Tape speed C Cassette mark D Tape position...

— 7 — Language Setting The default setting is “ENGLISH”. A Access Main Menu screen, then Initial Set screen Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “INITIAL SET”, then press OK or e . B Select language This VCR offers you the language choice to view menus and some mes...

— 8 — Tuner Setting Setting channels automatically— Auto Channel Set Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting. A Access Main Menu screen, then Tuner Set screen Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “TUNER SET...

— 9 — D Connect Controller to VCR Connect the Controller to the CABLE BOX Controller connector on the rear panel. E Turn on cable box or DBS receiver Select a channel other than channel 9 on your cable box, or channels 100, 205 on your DBS receiver. F Access Main Menu screen, then Initial Set screen...

— 10 — On the VCR On the Remote During playback Stop playback Press STOP/EJECT ( 0 ). Pause playback and view still picture Press PAUSE ( 9 ). ● Press PLAY ( 4 ) to resume normal playback. OR Push the ADVANCED JOG dial. ● Push the ADVANCED JOG dial again to resume normal playback. Pause and Frame-by...

— 11 — Playback Features Adjusting tracking condition— Tracking Adjustment Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment...

— 12 — Locating beginning of timer recordings— Instant Review After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW . ● The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatica...

— 13 — NOTE: If the tape reaches its end during recording, the recording stops and “ [ ” on the display panel blinks. Press STOP/EJECT ( 0 ) on the VCR to eject the cassette, or press REW ( 3 ) on the Remote or turn the ADVANCED JOG dial to the left on the VCR to rewind the tape. Recording Features ...

— 14 — Up to 8 timer recording programs can be made using VCR Plus+ timer programing, Express timer programing or 24HR Quick Programing method as far as a year in advance. Remember, the clock must be set before you can program the timer. NOTES: ● If all the 8 programs have already been set, “PROGRAM...

— 15 — Express Timer Programing Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically. A Press PROG. on the Remote to access the PlusCode No. screen. B Press START+/– once to access Program screen.Press START+/– , STOP+/– , DATE+/– or CH+/– repe...

— 16 — Program overlap warning display If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking. Example: Program 1 (you have just made) and Program 4 overlap...

— 17 — ● Screens for video navigation close after about 60 seconds if no operation is performed. Editing Titles You can edit the tape title and the program titles as you like. You can also edit the category in the program title. In short, you can use the Video Navigation function to create your own ...

— 18 — Checking memory A Access Main Menu screen, then Video Navigation screen Press MENU on the Remote. Press rt to move the highlight bar (arrow) to “VIDEO NAVIGATION”, then press OK or e . B Check memory Press rt to move the highlight bar (arrow) to “CHECK MEMORY”, then press OK or e . ● The Chec...

— 19 — C Select tape number Press rt to move the highlight bar (arrow) to the tape number on which you want to record a program, then press OK . ● The calculated blank space is based on the current tape speed (SP or EP) selected on the VCR. ● If the selected cassette has already been loaded, the VCR...

— 21 — 䡵 AV COMPU-LINK — ON /OFF The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used as either the REMOTE PAUSE terminal or the AV COMPULINK terminal. ● When this function is set to “ON”, you can use this terminal as the AV COMPULINK terminal. By connecting other JVC’s AV COMPULINK ...

— 22 — Multi-Brand Remote Control When programed (set) with a manufacturer’s (brand’s) code, this Remote can perform some of the remote control functions of the listed TVs, cable boxes and DBS (Direct Broadcast Satellite) receivers. You can control a JVC TV without setting a brand code. NOTES: ● Som...

— 23 — C Change code for VCR Press any key on the Remote. The VCR now responds to B code control signals. ● To set the Remote and the VCR to transmit and respond to A code control signals, repeat above procedure as shown above except press the Number key “ 1 ” in step B of 1 1 1 1 . To control two V...

— 24 — Editing with Another VCR You can use your VCR as the playback or recording VCR. Refer also to the other components’ instruction manuals for connection and its operations. A Make connections Example 1: When another VCR is VHS VCR Connect two VCRs with the supplied audio/video cable. ● If anoth...

— 25 — Audio Dubbing Audio Dubbing replaces a previously recorded normal audio track with a new soundtrack. A Make connections Connect an audio cable between the VCR’s audio input connectors and the audio component’s audio output connectors. ● When connecting a monaural audio component, use only the...

— 26 — E Locate end point Load the cassette to be edited into the VCR and press PLAY ( 4 ). Press PAUSE ( 9 ) when you find the end of the scene that you want to edit.Press C.RESET so that the counter reading becomes “0:00:00”. ● You can also use FF ( 5 ), the ADVANCED JOG dial on the VCR, or the JO...

— 27 — Before requesting service, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you from the trouble of sending your VCR off for repair. Power Playback Recording Timer Recording Troubleshooting SYMPTOM POSSIBLE CAUSE CORRE...

— 29 — FOR SERVICING (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER JVC SERVICE & ENGINEERING COMPANY OF AMERICA ACCESSORIES Don’t service the product yourself. TOLL FREE: 1-800-537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, pleas...

— 30 — WARRANTY (Only in U.S.A.) REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT. LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC CO...

— 31 — Memo HR-S9911U-EN.fm Page 31 Tuesday, April 16, 2002 8:14 PM