Page 2 - EN; CAUTIONS; CAUTION; Note to CATV system installer:
2 EN Dear Customer, Thank you for purchasing the JVC S-VHS video cassette recorder. Before use, please read the safety information and precautionscontained in the following pages to ensure safe use of your new VCR. CAUTIONS WARNING: TO PREVENT FIRE OR SHOCKHAZARD, DO NOT EXPOSE THISUNIT TO RAIN OR M...
Page 3 - INSTALLATION; Grounding or Polarization; Power Cord Protection; Wall or Ceiling Mounting; ANTENNA INSTALLATION; Outdoor Antenna Grounding
EN 3 IMPORTANT PRODUCTSAFETY INSTRUCTIONS Electrical energy can perform many useful functions. Butimproper use can result in potential electrical shock or firehazards. This product has been engineered and manufacturedto assure your personal safety. In order not to defeat the built-insafeguards, obse...
Page 4 - SERVICING; Damage Requiring Service; HOW TO USE THIS INSTRUCTION; Product and Cart Combination
4 EN SERVICING 1. Servicing If your product is not operating correctly or exhibits a markedchange in performance and you are unable to restore normaloperation by following the detailed procedure in its operatinginstructions, do not attempt to service it yourself as opening orremoving covers may expo...
Page 5 - CONTENTS
EN 5 CONTENTS Express Timer Programing .......................... 42 Checking program settings ....................................... 44Canceling or changing program settings .................. 44When programs overlap each other ......................... 45 VIDEO NAVIGATION 46 Navigation Playback ....
Page 6 - INSTALLING YOUR NEW VCR; TV; Basic Connections
6 EN INSTALLING YOUR NEW VCR TV OUT RF cable (supplied) Matching transformer(not supplied) AC PowerCord Audio/video cable(supplied) TV ANTENNA IN(Antenna or cable input) Back of VCR To 75 Ω terminal AC Outlet Antenna or cable Flat feeder Coaxial cable Basic Connections AUDIO OUT VIDEO OUT To Audio/v...
Page 7 - RF Connection; Connect VCR to power source; Back of VCR
EN 7 1 Check contents Make sure the package contains all of theaccessories listed in “SPECIFICATIONS” ( 墌 pg. 82). 2 Situate VCR Place the VCR on a stable, horizontal surface. 3 Connect VCR to TV The following connections are required. RF Connection 1 Disconnect the TV antenna from the TV. 2 Connect...
Page 8 - INFORMATION; INITIAL SETTINGS; Perform Plug & Play setup; Connect the antenna cable to the VCR (; ATTENTION; Auto Clock Set/Auto Tuner Set; During Initial Auto Clock Set
8 EN INFORMATION ● If “AUTO CLOCK” is set to “ON” on the Clock Set screen on page 11, the clock will be adjusted automatically by the hostchannel every hour (except 11:00 PM, midnight, 1:00 AM and 2:00 AM) using the incoming PBS channel clock setting data.(This automatic clock adjustment can only be...
Page 10 - Clock Setting; Preparations; Access Main Menu screen
10 EN INITIAL SETTINGS (cont.) Clock Setting Perform clock setting only if the clock has not been setcorrectly by the Plug & Play setting or if you use a cablebox.Access the Clock Set screen to perform the Semiauto orManual Clock Set. Each procedure starts from step 4 after preparation steps bel...
Page 11 - Setting clock semiautomatically; — Semiauto Clock Set; Set Auto Clock to ON; * Auto Daylight Saving Time; Select time zone; Return to normal screen; IMPORTANT
EN 11 Setting clock semiautomatically — Semiauto Clock Set You can change the host channel/D.S.T. /time zonesetting manually.First follow steps 1 to 3 on page 10, then go to the following steps. 4 Set Auto Clock to ON On the front panel: Press OK repeatedly to move the highlight barto “AUTO CLOCK”,t...
Page 12 - Setting clock manually; — Manual Clock Set; Set time; To make corrections any time during the process
12 EN INITIAL SETTINGS (cont.) CLOCK SET TIME DATE YEAR – –:– –AM 1/ 1 00 AUTO CLOCK : ONHOST CH : AUTO (CATV) D.S.T. : AUTO TIME ZONE : AUTO PRESS ( 5 , ∞ ), THEN (OK) PRESS (MENU) TO END Setting clock manually — Manual Clock Set First follow steps 1 to 3 on page 10, then go to the following steps....
Page 13 - Tuner Setting; — Auto Channel Set
EN 13 Tuner Setting Setting channels automatically — Auto Channel Set Use Auto Channel Set only if channels have not been setcorrectly by the Plug & Play setting. If you want to addor delete channels, and want to use the ghost reductionfunction, use Manual Channel Set ( 墌 pg. 14). 1 Access Main ...
Page 14 - Access Manual Channel Set screen; STANDARD; Setting channels manually; — Manual Channel Set
14 EN 3 Access Manual Channel Set screen On the front panel: Press CH 5∞ to move the highlight bar (arrow)to “MANUALCHANNEL SET”, thenpress OK . On the Remote: Press %fi to move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK or # . 4 Add or skip desired channels To add channels On t...
Page 15 - Setting ghost reduction
EN 15 Setting ghost reduction This VCR is equipped with the ghost reduction function.It reduces the ghosts using a GCR (Ghost CancellerReference) signal sent from a TV station. The ghostreduction mode can be set for each channelindependently and manually. NOTES: ● Ghosts may not be reduced in the fo...
Page 16 - Installing Controller; Situate Controller; Suggested location; Cable box
16 EN INITIAL SETTINGS (cont.) CABLE BOX The following procedure is required if you receive yourTV channels through a cable box (descrambler). TheController allows the VCR to automatically switch thecable box channel during timer recording. TheController is effective for recording broadcasts that ha...
Page 18 - Select cable box output channel
18 EN 5 Select cable box output channel Your selection dependson how your cable boxis connected to yourVCR. ● If your cable box is connected to yourVCR’s ANTENNA INterminal on the rear Press CH 5∞ on the front panel or %fi on the Remote until the channel number representingthe cable box’s output (CH2...
Page 19 - CABLE BOX BRAND LIST
EN 19 CABLE BOX BRAND LIST BRAND CODE ARCHER 1, 5, 17 CABLETENNA 1, 17 CABLEVIEW 15, 16, 17, 21, 25 CITIZEN 15, 16, 17, 21, 25 CURTIS 2, 8 DIAMOND 1, 17 EASTERN 19 GC BRAND 15, 16, 17, 21, 25 GEMINI 15 GENERAL INSTRUMENTS 1, 4, 6, 11, 12, 15, 28 HAMLIN 10, 18, 19, 23 JASCO 15 JERROLD 1, 4, 6, 11, 12...
Page 20 - Your VCR
20 EN INITIAL SETTINGS (cont.) The following procedure is required if you receive satellitechannels through a DBS (Direct Broadcast Satellite)receiver. The Controller allows the VCR to automaticallyswitch the DBS receiver’s channels during timer recording. NOTES: ● The VCR can automatically change t...
Page 21 - Access Main Menu screen on VCR
EN 21 Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. INITIAL SET CLOCK SETLANGUAGE ENGLISH GUIDE CHANNEL SETCABLE BOX SET = DBS RECEIVER SET JLIP ID NO. SETSELECT WITH ( 5 , ∞ ) AND (OK) PRESS (MENU) TO END DBS RECEIVER SET OFF PRESS ( 5 , ∞ ), THEN (OK) PRESS (...
Page 22 - Access DBS Receiver Brand Set screen
22 EN 6 Access DBS Receiver Brand Set screen Press OK . 7 Enter DBS Receiver’s brand On the Remote ONLY: Press the appropriate Number keys to enter the brand code from thefollowing list, thenpress OK . The program currentlyreceived through theDBS receiver appears for about 10 seconds. ● If the DBS r...
Page 23 - BASIC PLAYBACK AND RECORDING; Load a cassette; To stop playback; TIME SCAN SHUTTLE; To eject the tape; POWER
EN 23 BASIC PLAYBACK AND RECORDING BasicPlayback This VCR can check the tape condition during playback(and recording), and realizes the best possible pictures. ● When you play back a tape recorded on this VCR, youcan use the Video Navigation function ( 墌 pg. 46). 1 Load a cassette Make sure the wind...
Page 24 - Changing display information; Press DISPLAY during playback.; To reset the time counter,; Checking tape position; Time Counter
24 EN BasicPlaybackFeatures Changing display information Press DISPLAY during playback. Each time you press the button, the front display panelshows the time counter, tape remaining time and theclock time in sequence. ● To display the VCR status including the time counterand the clock time on the TV...
Page 25 - Selecting monitor sound; Playing back tape repeatedly; Activate manual tracking
EN 25 Selecting monitor sound — Audio Monitor You can select the desired monitor sound. While playing back a tape on which stereo sound or SAPsound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows: HI-FI: Normally select this. Hi-Fi sound is playe...
Page 26 - — Index Search; Start search; — Instant Review; REVIEW
26 EN BASIC PLAYBACK AND RECORDING (cont.) Locating beginning ofrecordings — Index Search Index codes are placed on the tape at the beginning ofeach recording when recording on this VCR. You canfind and automatically play back from the beginning ofany recording using the Index Search function. 1 Sta...
Page 27 - Other Useful functions for playback; Skipping unwanted portions; — Skip Search; To return to normal playback during Skip Search,; PLAY
EN 27 Other Useful functions for playback You can also use the following functions for playback. ● Video Calibration ( 墌 pg. 57) When this function is set to “ON”, this VCR checks thecondition of the tape in use during playback andrecording, and compensates to provide the highest-possible pictures. ...
Page 28 - CH; Set tape speed
28 EN BasicRecording This VCR can check the tape condition during recording(and playback), and realizes the best possible pictures. In addition, this VCR is equipped with the VideoNavigation function, which allows you to quicklylocate the programs you have recorded on a tape.When recording on this V...
Page 30 - Press DISPLAY during recording or recording pause.; Specifying recording length; ) on the front panel
30 EN BasicRecordingFeatures A B Changing display information Press DISPLAY during recording or recording pause. Each time you press the button, the front display panelshows the time counter, tape remaining time, channelnumber and the clock time in sequence. ● To display the VCR status including the...
Page 31 - Engage TV mode; from the VCR; Select channel for viewing; Showing on-screen display; Display VCR status on TV screen; Exit on-screen display; OSD; — Super VHS ET; Start recording
EN 31 Watching one program whilerecording another 1 Engage TV mode During recording... ● If you connect the TV and the VCR only usingthe RF connection ( 墌 pg. 7) to view pictures from the VCR Press TV/VCR on the Remote so that VCR mode indicator goes off from the front display panel.(The TV broadcas...
Page 32 - Adjusting recording level
32 EN BASIC PLAYBACK AND RECORDING (cont.) Adjusting recording level You can adjust the audio recording level manually. 1 Access Main Menu screen Press MENU . 2 Select Recording Level Control screen On the front panel: Press CH 5∞ to move the highlight bar (arrow) to“REC LEVEL CTL”, thenpress OK . O...
Page 33 - Accidental erasure prevention; Other useful functions for recording
EN 33 Accidental erasure prevention To prevent accidentalrecording on a recordedcassette, remove its recordsafety tab.To record on it later, coverthe hole with adhesive tape. Record safety tab Other useful functions for recording ● Recording Resume Function If there is a power outage during recordin...
Page 34 - SPECIAL EFFECT PLAYBACK; — Picture Search; B C
34 EN SPECIAL EFFECT PLAYBACK Special EffectPlayback Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. With this VCR, you can enjoy special effect playbacksuch as high-speed search, variable-speed search, andstill playback and so on.During special effect playback, ...
Page 35 - Viewing still picture; — Still Picture Playback; Pause during playback
EN 35 7 Variable-Speed Picture Search: You can change the speed of picture search. How to use the TIME SCAN SHUTTLE ring on the frontpanel: Turn the TIME SCAN SHUTTLE ring to the right (forward search) or to the left (reverse search).When you release the ring, it remains at the positionwhere you tur...
Page 36 - Viewing slow motion picture
36 EN Viewing slow motion picture — Slow Motion Playback (Pro-Slow*) On the front panel:During normal playback or still picture playback: Turn the TIME SCAN SHUTTLE ring slowly to the right (forward slow motion) or to the left (reverse slow motion)so that slow motion playback starts. When you releas...
Page 37 - TimeScan function; How to use the SHUTTLE ring on the Remote; SHUTTLE
EN 37 Speed Names ofspecial-effectsplayback Reverse Forward Search Play Slow-Motion Still Slow-Motion Play Search (Pro-Slow) (Pro-Slow) -7x -5x -3x -1x -1/2x -1/3x 0 1/3x 1/2x 1x 1.5x 2x 3x 5x 7x Audio is output. Audio is Audio is Audio is Audio is output. not output. output. output. TimeScan functi...
Page 38 - Number; TIMER RECORDING
38 EN VCR Plus+ ® TimerPrograming Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. Timer recording allows you to program the VCR toautomatically record a broadcast at some future time.Up to 8 timer recording programs can be made usingVCR Plus+ timer programing or ...
Page 40 - Setting; VCR Plus+ guide channel matching
40 EN TIMER RECORDING (cont.) ChangingVCR Plus+ ® Setting Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. IMPORTANT If you have moved to a different area or if a broadcastingstation’s channel number has been changed, the wrongVCR CH or CABLE CH number will be dis...
Page 42 - START
42 EN TIMER RECORDING (cont.) You can directly program the VCR’s timer to record up to8 programmes, as far as a year in advance. Remember,the clock must be set before you can program the timer( 墌 pg. 8 or 10). 1 Load a cassette Make sure the record safety tab is intact. If not,cover the hole with ad...
Page 43 - ATTENTION FOR DBS RECEIVER USERS
EN 43 8 Set tape speed Press SP/EP ( ) to set the tape speed. 9 Return to normal screen Press PROG. or OK . “PROGRAM COMPLETED” appears on thescreen for about 5 seconds, then normal screenappears.• If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another programoverlapping the program yo...
Page 44 - Checking program settings; Other Useful functions for timer recording
44 EN TIMER RECORDING (cont.) Checking program settings 1 Disengage timer Press TIMER , then press POWER . ● When “AUTO TIMER” ( 墌 pg. 57) is set to “ON”, you do not have to press TIMER . 2 Access Program Check screen Press PROG. CHECK . 3 Access Program screen Press PROG. CHECK again to check more ...
Page 45 - CANCEL
EN 45 When programs overlap eachother If “PROGRAM NOT COMPLETED PROGRAMOVERLAP” appears, you have another programoverlapping the program you have just made.The Program Check screen appears and conflictingprograms will start blinking. EX. Program 1 (you have just made) and Program 4overlap each other...
Page 46 - NAVIGATION; Select program; Start playback; OK; VIDEO NAVIGATION
46 EN NavigationPlayback Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. This function is useful when you want to quickly find outwhat programs you have recorded on a tape using thisVCR. This function allows you to select a program towatch, and then automatically...
Page 47 - Deactivating Video Navigation; How to read the Video
EN 47 Deactivating Video Navigation If you do not want to store program information, you candeactivate the Video Navigation function. 1 Access Main Menu screen Press MENU . 2 Access Video Navigation screen On the front panel: Press CH 5∞ to move the highlight bar (arrow) to“VIDEO NAVIGATION”,then pr...
Page 48 - Editing Titles; Editing tape title; MENU; Access Video Navigation screen; Access Edit Title screen; Select tape number
48 EN VIDEO NAVIGATION (cont.) Editing Titles Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. When you record a TV program on this VCR, the VCRautomatically records the recording start time, date, andchannel in each program title. If the tape is recorded forthe f...
Page 49 - How to enter the characters
EN 49 5 Select tape title Press %fi to move the highlight bar (arrow) to thetape title column (top),then press OK or # . ● “*” indicates the currentposition on the tape. 6 Enter title Press the Number keys to enter the title, then press OK . • For entering the characters as the title,refer to “How to...
Page 50 - Deleting tape information; Select tape title; Delete tape information
50 EN Deleting tape information When you want to delete the entire tape information(information for all recorded programs on the tape),follow the procedure below by using the Remote.• Tape information for the Video Navigation function is deleted, but the recorded programs will not be erased. 1 Follo...
Page 52 - Finding Tapes; Finding by tape number; Access Find Title screen; Access tape number screen
52 EN VIDEO NAVIGATION (cont.) Finding Tapes Turn on the VCR and the TV, and select the VCRchannel 3 or 4 (or AV mode) on the TV. You can find a tape you want using Video Navigation.You have four methods to find tapes; by tape number, byrecording date, by category, and by tape remaining time. Findin...
Page 53 - Finding by recording date; Finding by category
EN 53 5 Conform tape number lists ● To go to another page of the lists, press @ # . ● If you press %fi then press OK to select the tape number, the VCR will go into the Search Modefor the selected tape. ( 墌 pg. 55) 6 Return to normal screen Press MENU . Finding by recording date Use the Remote to do ...
Page 54 - Finding by remaining time; Confirm tape number lists
54 EN Finding by remaining time You can find a tape whose remaining time is enough fora program you want to record. ● The remaining time can be calculated based on therecording speed currently selected on this VCR. Use the Remote to do the following operations. 1 Access Main Menu screen Press MENU ....
Page 56 - OTHER USEFUL FUNCTIONS
56 EN You can use the other useful function settings on theFunction Set screen by following the proceduredescribed below. ● For the functions you can set on the Function Setscreen, see pages 57 to 60. 1 Access Main Menu screen Press MENU . 2 Access Function Set screen On the front panel: Press CH 5∞...
Page 57 - bold; When this function is set to “ON”:; PICTURE CONTROL; AUTO; VIDEO CALIBRATION; OFF; SUPERIMPOSE; ON
EN 57 * The default setting is bold in the table below. When this function is set to “ON”, this VCR checks the condition of thetape in use during playback and recording, and compensates to providethe highest-possible pictures. This takes place whenever you play back atape or start recording after in...
Page 58 - When this function is set to “ON”; VIDEO STABILIZER; ND AUDIO RECORD; DIGITAL R3
58 EN * The default setting is bold in the table below. When this function is set to “ON”, the VCR automatically switches to EPmode to allow complete recording if there is not enough tape to recordthe entire program while timer-recording in SP mode. For Example . . . Recording a program of 140 minut...
Page 59 - AUDIO MONITOR
EN 59 * The default setting is bold in the table below. This VCR can record two sound tracks simultaneously (normal and Hi-Fi) on a tape.You can select the sound track(s) to listen to while playing back a Hi-Fistereo tape.In addition, when playing back a prerecorded tape containing twoseparate audio...
Page 60 - REAR AUX INPUT; FRONT AUX INPUT; VIDEO; TIMESCAN AUDIO; AV COMPU LINK
60 EN JLIP OTHER USEFUL FUNCTIONS (cont.) * The default setting is bold in the table below. The TimeScan function enables this VCR to reproduce noiseless picturesand sounds during special effect playback ( 墌 pg. 34 – 37). However, the sounds you hear are monaural, and are not the same asoriginal sou...
Page 61 - Set timer program on DBS receiver; REC LINK
EN 61 NOTES: ● While the Satellite Auto Recording standby mode or after Satellite Auto Recording is finished, the VCR will not enter the timerrecording standby mode even though “AUTO TIMER” is set to “ON”. ( 墌 pg. 57) ● If you turn off this VCR while Satellite Auto Recording is in progress, recordin...
Page 62 - Child Lock
62 EN You can disable the VCR operations. ● You can only use the Remote for this operation. While the VCR is turned on, press and hold POWER onthe Remote for more than seven seconds. The VCR turns off, and the child lock indicator appearson the front display panel. ● The child lock function is now a...
Page 64 - Connection; EDITING; Various connection for editing tapes
64 EN Edit FromCamcorder To rear panelREMOTE PAUSE/AV COMPULINKconnector Mini-plug cable(not supplied)(JVC camcorderonly) Audio/videocable(supplied) Camcorder(for playback) To Audio/videooutput To EDIT This VCR (for recording ) To AUDIO/VIDEO Input Connection EDITING S-video cable(supplied) To S-vid...
Page 67 - Audio Dubbing; Select input mode; Locate start point; To stop audio dubbing; Make connections
EN 67 Audio Dubbing 2 Load a cassette and prepare the audiosource 3 Select input mode Select “F-1” — when connecting the audio component to the audio input connectors onthe front panel. Select “L-1” — when connecting the audio component to the audio input connectors onthe rear panel. On the front pa...
Page 69 - To stop editing any time during recording
EN 69 1 Make connections Connect an audio/video cable between the VCR’saudio/video input connectors and the othercomponent’s audio/video output connectors. 2 Prepare tapes Load the source tape on the other VCR, and thetape to be edited on this VCR. 3 Select input mode Select “F-1” — when connecting ...
Page 70 - MULTI-BRAND REMOTE CONTROL; Turn on the TV
70 EN MULTI-BRAND REMOTE CONTROL This Remote can control some functions of remotecontrollable TVs of the brands listed below. Withoutsetting, you can control a JVC TV. 1 Turn on the TV Turn on the TV using the Power button on the TVor its Remote. 2 Set remote operation mode Set the VCR/TV/CABLE/DBS ...
Page 72 - Turn on the DBS receiver
72 EN MULTI-BRAND REMOTE CONTROL (cont.) This Remote can control some functions of the DBS(Direct Broadcast Satellite) receivers of the brands listedbelow. 1 Turn on the DBS receiver Turn on the DBS receiver using the Power buttonon the DBS receiver or its Remote. 2 Set remote operation mode Set the...
Page 73 - To control two VCRs with the same Remote
EN 73 This Remote is capable of transmitting two controlcodes; one set to respond to A code control signals andanother set to respond to B code control signals.This Remote control is preset to send A code signalsbecause your VCR is initially set to respond to A codesignals. You can easily modify you...
Page 74 - TROUBLESHOOTING
74 EN TROUBLESHOOTING Before requesting service, use this chart and see if you can repair the trouble yourself. Small problems are often easilycorrected, and this can save you from the trouble of sending your VCR off for repair. POSSIBLE CAUSE ● The AC power cord is disconnected. ● The VCR is in the...
Page 75 - CORRECTIVE ACTION; SYMPTOM; CONTINUED ON NEXT PAGE
EN 75 CORRECTIVE ACTION Set the clock and/or timer correctly. Press TIMER and make sure that ‰ appears on the front display panel.Re-perform the set-up procedures.Make sure you have compensated forguide channel and VCR or cable boxchannel number mismatches( 墌 pg. 40). Timer programing cannot be perf...
Page 76 - MOISTURE CONDENSATION; OTHER PROBLEMS
76 EN VIDEO NAVIGATION CORRECTIVE ACTION Tape information cannot be shown if ithas not been recorded on this VCR. Video Navigation cannot workcorrectly on a tape if it has more thanone tape number. If this happens, fast-forward the tape up to its end, eject it,and try it again. Check the remaining m...
Page 77 - remain lit on the front display panel. Is; Questions and answers; effect does removing the safety tab have?
EN 77 RECORDINGQ. When I pause and then resume a recording, the end of the recording before the pause is overlapped bythe new recording. Why does this happen? A. This is normal. It reduces distortion at the pause andresume points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 78 - INDEX; List of terms
78 EN INDEX List of terms This guide serves as a quick way to locate frequently used terms and on-screen display names. A Accidental erasure prevention 33Audio Dubbing 67Audio Monitor 25, 59Auto Channel Set 13Auto Daylight Saving Time 11Auto SP → EP Timer 58 Auto Timer 57Automatic tracking 25AV Conn...
Page 79 - VCR
EN 79 Front panel 1 POWER button : 墌 pg. 23, 29 2 NAVIGATION button : 墌 pg. 46 3 S-VHS ET button and lamp : 墌 pg. 31 4 STOP/EJECT ( 7 / 0 ) button : 墌 pg. 23, 29 5 CH 5 ∞ button : 墌 pg. 28 6 Cassette loading slot 7 INSERT button : 墌 pg. 69 8 A. (Audio) DUB button : 墌 pg. 67, 69 9 PLAY ( 3 ) button :...
Page 80 - Rear panel
80 EN Rear panel 1 AC power cord : 墌 pg. 6 2 AUDIO/VIDEO OUT connectors : 墌 pg. 66 3 AUDIO/VIDEO IN connectors : 墌 pg. 69 4 S VIDEO OUT connector : 墌 pg. 6, 66 5 S VIDEO IN connector : 墌 pg. 69 6 JLIP terminal : 墌 pg. 63 7 ANTENNA IN terminal : 墌 pg. 6 8 REMOTE PAUSE/AV COMPULINK terminal ● REMOTE P...
Page 81 - Remote; Character input buttons :; How to use the Remote
EN 81 Remote 1 VCR/TV/CABLE/DBS selector : 墌 pg. 70 – 73 2 TV/VCR button : 墌 pg. 28, 31, 70 3 A/B button : 墌 pg. 73 4 Number keys : 墌 pg. 28, 38 Character input buttons : 墌 pg. 49 5 DBS button : 墌 pg. 43 6 CANCEL button : 墌 pg. 38, 44 C. (Counter) RESET button : 墌 pg. 24, 30 7 STOP +/– button : 墌 pg...
Page 82 - SPECIFICATIONS; Usable cassettes
82 EN GENERAL Power requirement : AC 120 V ` , 60 Hz Power consumption Power on : 27 W Power off : 2.6 W Temperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 437 mm x 97 mm x 347 mm (17-1/4" x 3-7...
Page 83 - HOW TO LOCATE YOUR JVC SERVICE CENTER; JVC SERVICE & ENGINEERING; DIVISION OF JVC AMERICAS CORP.; ACCESSORIES; — JVC
EN 83 HOW TO LOCATE YOUR JVC SERVICE CENTER FOR SERVICING (Only in U.S.A.) JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. ACCESSORIES Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineeringand production of th...
Page 84 - LIMITED WARRANTY
84 EN WARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINALPURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retailpurchase for ...
Page 85 - MEMO
JVC RV-NB20B
User Manual
JVC HX-Z30
User Manual
JVC MX-GT80
User Manual
JVC AV-48WP30
Manual
JVC HR-S3911U
User Manual
JVC HD-52Z575
Manual
JVC AV-27F702
Manual
JVC GR-DV500U
User Manual
JVC HR-A591U
User Manual
JVC AV-36320
Manual
JVC XV-S200BK
Manual
JVC SP-EXA1
User Manual
JVC AV-36D303
Manual
JVC FS-SD770
User Manual
JVC AV-56WP74
User Manual