Page 2 - SAFETY PRECAUTIONS; CAUTION
2 EN Master Page: Left-Safety GR-DVM96-76U_02-08.fmPage 2 Using This Instruction Manual ● All major sections are listed in the Table Of Contents on the cover page. ● Notes appear after most subsections. Be sure to read these as well. ● Basic and advanced features/operation are separated for easier r...
Page 3 - IMPORTANT SAFTY INSTRUCTIONS
EN 3 Master Page: Right-Safety GR-DVM96-76U_02-08.fmPage 3 When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16”) or more on both sides, on top and at the rear). Do not block the ventilation holes.(If...
Page 5 - Provided Accessories
EN 5 Master Page: Right-Safety GR-DVM96-76U_02-08.fmPage 5 * Attach the battery mount cover to protect the battery connector when the battery pack is removed. For the attachment/detachment, refer to “Charging The Battery Pack” ( 墌 pg. 10). NOTE: In order to maintain optimum performance of the camcor...
Page 6 - How To Attach The Grip Belt
6 EN Master Page: Left GR-DVM96-76U_02-08.fmPage 6 How To Attach The Grip Belt NOTES: ● It is recommended to use the finger support so that the tally lamp or the flash is unobstructed with your fingers. ● The grip belt can be attached to the camcorder even if the finger support is not used. Be caref...
Page 7 - How To Attach The Lens Cap
EN 7 Master Page: Right GR-DVM96-76U_02-08.fmPage 7 How To Attach The Lens Cap To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. NOTE: To confirm the lens cap is on correctly make sure the cap is flush to the camcorder. 1) 2) 3) Attach the lens cap with...
Page 8 - Automatic Demonstration
8 EN Master Page: Left GR-DVM96-76U_02-08.fmPage 8 Automatic Demonstration Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). 䡲 Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch is set to “ A ” or “ M ” and no cass...
Page 9 - GETTING STARTED; CONTENTS
Master Page: Right-SecCover GR-DVM96-76U_09-17.fm Page 9 EN 9 GETTING STARTED Power ..................................................................................................10 Grip Adjustment .....................................................................................12 Viewfinder ...
Page 10 - Power
10 EN Master Page: Left GR-DVM96-76U_09-17.fm Page 10 This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. Charging The Battery Pack 1 With the arrow on the battery pack pointing to the lens side...
Page 12 - Grip Adjustment
12 EN Master Page: Left GR-DVM96-76U_09-17.fm Page 12 1 Loosen the belt. 2 Pass your right hand through the loop and grasp the grip. 3 Hung your third and little fingers on the finger support so that the tally lamp or the flash is unobstructed with your fingers. 4 Adjust your thumb and fingers throu...
Page 13 - Tripod Mounting
EN 13 Master Page: Right GR-DVM96-76U_09-17.fm Page 13 Align the screw on the tripod with the camcorder’s mounting socket. Then tighten the screw. ● Some tripods are not equipped with studs. While using the LCD monitor: Make sure the viewfinder is pushed back in. Open the LCD monitor fully. It can r...
Page 14 - Operation Mode
14 EN Master Page: Left GR-DVM96-76U_09-17.fm Page 14 To turn on the camcorder, set the Power Switch to any operation mode except “OFF” while pressing down the Lock Button located on the switch. Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/MEMOR...
Page 15 - Built-in Clock’s Rechargeable Lithium Battery
EN 15 Master Page: Right GR-DVM96-76U_09-17.fm Page 15 The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. ( 墌 pg. 38, 49) 1 Set the Power Switch to “ M ” while pressing down the Lock Button located on the switch. 2 Open the LCD monitor full...
Page 18 - VIDEO RECORDING & PLAYBACK
18 EN Master Page: Left-SecCover GR-DVM96-76U_18-25.fm Page 18 VIDEO RECORDING & PLAYBACK VIDEO RECORDING ..................................................................................... 19 Basic Recording ........................................................................................
Page 19 - VIDEO RECORDING; Tape Remaining Time; Basic Recording
EN 19 Master Page: Right-Heading0 GR-DVM96-76U_18-25.fm Page 19 VIDEO RECORDING NOTE: Before continuing, perform the procedures listed below: ● Power ( 墌 pg. 10) ● Loading A Cassette ( 墌 pg. 16) ● Remove the lens cap ( 墌 pg. 7) 1 Set the VIDEO/MEMORY Switch to “VIDEO”. 2 Set the Power Switch to “ A ...
Page 20 - Zooming; Journalistic Shooting
20 EN Master Page: Left GR-DVM96-76U_18-25.fm Page 20 Zooming Produces the zoom in/out effect, or an instantaneous change in image magnification. Zoom In Turn the Power Zoom Ring towards “T”. Zoom Out Turn the Power Zoom Ring towards “W”. ● The further you turn the Power Zoom Ring, the quicker the z...
Page 22 - VIDEO PLAYBACK; Still Playback; Normal Playback
22 EN Master Page: Left-Heading0 GR-DVM96-76U_18-25.fm Page 22 VIDEO PLAYBACK 1 Load a cassette. ( 墌 pg. 16) 2 Set the VIDEO/MEMORY Switch to “VIDEO”. 3 Set the Power Switch to “ P ” while pressing down the Lock Button located on the switch. 4 To start playback, press 4 / 9 . 5 To stop playback, pre...
Page 23 - Blank Search
EN 23 Master Page: Right GR-DVM96-76U_18-25.fm Page 23 Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption. ( 墌 pg. 21) 1 Load a cassette. ( 墌 pg. 16) 2 Set the VIDEO/MEMORY Switch to “VIDEO”. 3 Set the Power Switch to “ P ” while pres...
Page 24 - Connections To A TV Or VCR
24 EN Master Page: Left GR-DVM96-76U_18-25.fm Page 24 These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped only with A/V input connectors * The Audio cable is not required for watching still i...
Page 28 - Normal Playback Of Images; Auto Playback Of Images
28 EN Master Page: Left-Heading0 GR-DVM96-76U_26-36.fm Page 28 D.S.C. PLAYBACK Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album. 1 Load a memory card. ...
Page 31 - Removing On-Screen Display; Protecting Files
EN 31 Master Page: Right GR-DVM96-76U_26-36.fm Page 31 1 Perform steps 1 – 6 of “Normal Playback Of Images” ( 墌 pg. 28). 2 Press the MENU Wheel in. The Menu Screen appears. 3 Rotate the MENU Wheel to select “ n DISPLAY”, and press it. The Sub Menu appears. 4 Rotate the MENU Wheel to select “OFF”, an...
Page 32 - To protect the currently displayed file; To Remove Protection
32 EN Master Page: Left GR-DVM96-76U_26-36.fm Page 32 8 Rotate the MENU Wheel to select “PROTECT”, and press it. The Sub Menu appears. To protect the currently displayed file 9 Rotate the MENU Wheel to select “CURRENT”, and press it. The PROTECT screen appears. 10 Press 3 or 5 to select the desired ...
Page 33 - To delete the currently displayed file; Deleting Files
EN 33 Master Page: Right GR-DVM96-76U_26-36.fm Page 33 Previously stored files can be deleted either one at a time or all at once. 1 Load a memory card. ( 墌 pg. 17) 2 Set the VIDEO/MEMORY Switch to “MEMORY”. 3 Set the Power Switch to “ P ” while pressing down the Lock Button located on the switch. 4...
Page 34 - To Print All Still Images (One Print For Each); Making A New Folder
34 EN Master Page: Left GR-DVM96-76U_26-36.fm Page 34 New still pictures you are going to take can be separated from previously shot pictures by resetting the file name to DVC00001; these new pictures will be stored in a new folder. 1 Load a memory card. ( 墌 pg. 17) 2 Set the VIDEO/MEMORY Switch to ...
Page 35 - To Reset The Number Of Prints
EN 35 Master Page: Right GR-DVM96-76U_26-36.fm Page 35 10 Rotate the MENU Wheel to select “EXECUTE”, and press it. The normal playback screen appears. ● To cancel selection, rotate the MENU Wheel to select “RETURN”, and press it. To Print By Selecting Still Images And Number Of Prints 1 Perform step...
Page 36 - Initializing A Memory Card
36 EN Master Page: Left GR-DVM96-76U_26-36.fm Page 36 You can initialize a memory card anytime.After initializing, all files and data stored in the memory card, including those which have been protected, are cleared. 1 Set the VIDEO/MEMORY Switch to “MEMORY”. 2 Set the Power Switch to “ P ” while pr...
Page 37 - ADVANCED FEATURES
Master Page: Right-SecCover GR-DVM96-76U_37-79.fm Page 37 EN 37 ADVANCED FEATURES MENUS FOR DETAILED ADJUSTMENT ............................................................ 38 Changing The Menu Settings ........................................................................ 38 RECORDING MENUS ........
Page 38 - MENUS FOR DETAILED ADJUSTMENT; Menus without Sub Menus; Changing The Menu Settings
38 EN Master Page: Left-Heading0 GR-DVM96-76U_37-79.fm Page 38 MENUS FOR DETAILED ADJUSTMENT This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ( 墌 pg. 40 – 52) 1 For Video and D.S.C. Recording Menus: ● Set the VIDEO/ME...
Page 39 - Menus with Sub Menus
EN 39 Master Page: Right GR-DVM96-76U_37-79.fm Page 39 Menus with Sub Menus — m CAMERA, q MANUAL, s SYSTEM, n DISPLAY, o DSC, t VIDEO 1) Rotate the MENU Wheel to select the desired function and press it. The Sub Menu appears. Example: m CAMERA Menu 2) Rotate the MENU Wheel to select the desired para...
Page 40 - RECORDING MENUS; Wipe Or Fader Effects
40 EN Master Page: Left-Heading0 GR-DVM96-76U_37-79.fm Page 40 RECORDING MENUS These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. IMPORTANT: Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effec...
Page 42 - PROGRAM AE; Program AE With Special Effects
42 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 42 IMPORTANT: Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. ( 墌 pg. 40) If an unusable mode is selected, the indicator of Wipe/Fader effects blinks or goes out. 1 Set the Power Switch to “ M ” while pr...
Page 43 - EXPOSURE; Exposure Control; White Balance Adjustment
EN 43 Master Page: Right GR-DVM96-76U_37-79.fm Page 43 * For GR-DVM96 : Available only when the VIDEO/MEMORY Switch is set to “VIDEO”. EXPOSURE ( : Factory-preset) For details, refer to “Exposure Control” ( 墌 pg. 56). W. BALANCE ( : Factory-preset) For details, refer to “White Balance Adjustment” ( ...
Page 44 - Camera Menu
44 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 44 CAMERA ( : Factory-preset) Recording mode Allows you to set the recording mode (SP or LP) depending on your preference. NOTES: ● Audio Dubbing ( 墌 pg. 70) and Insert Editing ( 墌 pg. 72) are possible on tapes recorded in the SP mode. ● If the reco...
Page 45 - Snapshot mode for video recording; Gain up
EN 45 Master Page: Right GR-DVM96-76U_37-79.fm Page 45 Snapshot mode for video recording For details on the procedure, refer to “Snapshot (For Video Recording)” ( 墌 pg. 53). There is the sound effect of a shutter closing. Gain up SNAP MODE FULL Snapshot mode with no frame PIN-UP Pin-Up mode FRAME Sn...
Page 46 - MANUAL; Digital Image Stabilization; Manual Menu
46 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 46 MANUAL ( : Factory-preset) Digital Image Stabilization Maximum telephoto setting Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1 m (3.3 ft) to the subject, the...
Page 48 - SYSTEM; Beep, melody and shutter sound; System Menu
48 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 48 SYSTEM ( : Factory-preset) Beep, melody and shutter sound Tally lamp setting Automatic demonstration mode Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. ( 墌 pg...
Page 49 - Resetting menu settings; Display setting; Display Menu
EN 49 Master Page: Right GR-DVM96-76U_37-79.fm Page 49 Resetting menu settings Sound input (GR-DVM96 only) DISPLAY ( : Factory-preset) Display setting Date and time display setting Time code setting Clock adjustment CAM RESET CANCEL Does not reset the settings to the factory-preset. EXECUTE Resets a...
Page 50 - DSC; Picture quality; Recording media selection; DSC Menu
50 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 50 DSC ( : Factory-preset) Picture quality Image size Approximate Number of Storable Images The numbers in parentheses are for GR-DVM76. * Provided with GR-DVM76 only ** Provided with GR-DVM96 only (12 sound effects pre-stored)*** GR-DVM96 only Reco...
Page 51 - VIDEO; Playback sound; Video Menu; PLAYBACK MENUS
EN 51 Master Page: Right GR-DVM96-76U_37-79.fm Page 51 VIDEO ( : Factory-preset) Playback sound During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu acc...
Page 53 - FEATURES FOR RECORDING; Motor Drive Mode
EN 53 Master Page: Right-Heading0 GR-DVM96-76U_37-79.fm Page 53 FEATURES FOR RECORDING Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed. 1 Set the Power...
Page 54 - Snapshot Flash; Flash Brightness Adjustment
54 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 54 The flash can be used when a snapshot is taken in Record-Standby mode. ( 墌 pg. 27, 53) ● When the Power Switch is set to “ A ”, the flash automatically fires if it is dark ( appears). ● When the Power Switch is set to “ M ”, you can select the fl...
Page 55 - Auto Focus
EN 55 Master Page: Right GR-DVM96-76U_37-79.fm Page 55 The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2”) to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases perform...
Page 57 - Iris Lock; Backlight Compensation
EN 57 Master Page: Right GR-DVM96-76U_37-79.fm Page 57 Like the pupil of the human eye, the iris contracts in well-lit environments to keep too much light from entering, and dilates in dim environments to allow in more light.Use this function in the following situations: ● When shooting a moving sub...
Page 58 - Manual White Balance Adjustment
58 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 58 The white balance that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced.The white balance is usually adjusted automatically. However, more ad...
Page 59 - Downloading sound data from Web Site
EN 59 Master Page: Right GR-DVM96-76U_37-79.fm Page 59 The sound effects pre-stored in the provided memory card can be dubbed onto a tape. 1 Load a cassette. ( 墌 pg. 16) 2 Load the provided memory card. ( 墌 pg. 17) 3 Set the VIDEO/MEMORY Switch to “VIDEO”. 4 Set the Power Switch to “ A ” or “ M ” wh...
Page 62 - DUBBING; Dubbing To A VCR
62 EN Master Page: Left-Heading0 GR-DVM96-76U_37-79.fm Page 62 DUBBING . * Connect when an S-Video cable is not used. ** When connecting the cables, open these covers. 1 Following the illustrations, connect the camcorder and the VCR. Also refer to pages 24 and 25. 2 Set the camcorder’s VIDEO/MEMORY ...
Page 66 - USING THE REMOTE CONTROL UNIT; Installing The Batteries
66 EN Master Page: Left-Heading0 GR-DVM96-76U_37-79.fm Page 66 USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playbac...
Page 68 - Playback Zoom
68 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 68 . Slow-Motion Playback Allows slow-speed search in either direction during video playback. During normal video playback, press SLOW ( Y I or I U ) more than approx. 2 seconds. ● After approx. 1 minute in Slow Rewind or approx. 2 minutes in Slow F...
Page 69 - Playback Special Effects
EN 69 Master Page: Right GR-DVM96-76U_37-79.fm Page 69 Playback Special Effects Allows you to add creative effects to the video playback image.The effects that can be used during playback are CLASSIC FILM, MONOTONE, SEPIA and STROBE. The effects work the same in playback as they did in recording. ( ...
Page 70 - Audio Dubbing
70 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 70 The audio track can be customised only when recorded in the 12-bit and SP modes. ( 墌 pg. 44) 1 Play back the tape to locate the point where editing will start, then press PAUSE ( 9 ). 2 While holding A. DUB ( D ) on the remote control, press PAUS...
Page 72 - Insert Editing
72 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 72 You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged. NOTES: ● Before performing the following step...
Page 74 - Make Connections
74 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 74 Make Connections Also refer to page 24 and 25. * Connect when an S-Video cable is not used. 1 A A JVC VCR equipped with a Remote PAUSE connector… …Connect the editing cable to the Remote PAUSE connector. B A JVC VCR not equipped with a Remote PAU...
Page 75 - Select Scenes
EN 75 Master Page: Right GR-DVM96-76U_37-79.fm Page 75 Select Scenes 6 Point the remote control at the camcorder’s remote sensor. Press PLAY ( U ) and then press R.A.EDIT ON/OFF on the remote control. The Random Assemble Editing Menu appears. 7 If using a Wipe/Fader at the beginning of the scene, pr...
Page 76 - Automatic Editing To VCR
76 EN Master Page: Left GR-DVM96-76U_37-79.fm Page 76 Automatic Editing To VCR 13 Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE ( 9 ). 14 Point the remote control towards the VCR’s remote sensor and press VCR REC STBY ( 79 ), or manually engage the V...
Page 77 - For More Accurate Editing; Diagnosing VCR/Camcorder Timing
EN 77 Master Page: Right GR-DVM96-76U_37-79.fm Page 77 For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have ...
Page 78 - SYSTEM CONNECTIONS; Connection To A Personal Computer; OR
78 EN Master Page: Left-Heading0 GR-DVM96-76U_37-79.fm Page 78 SYSTEM CONNECTIONS [A] Using USB cable This camcorder can transfer still images to a PC by using the provided software. [B] Using DV cable It is also possible to transfer still images to a PC with a DV connector by using software equippe...
Page 80 - REFERENCES
80 EN Master Page: Left-SecCover GR-DVM96-76U_80-103.fm Page 80 REFERENCES DETAILS ..................................................................................................... 81 TROUBLESHOOTING .................................................................................... 82 CAUTIONS...
Page 81 - DETAILS
EN 81 Master Page: Right-Heading0 GR-DVM96-76U_80-103.fm Page 81 DETAILS ITEMS NOTES V Power ( 墌 pg. 10) ● Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, chargin...
Page 82 - TROUBLESHOOTING
82 EN Master Page: Left-Heading0 GR-DVM96-76U_80-103.fm Page 82 TROUBLESHOOTING If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. Power Video and D.S.C. Recording The camcorder is a microcomputer-controlled device. External noise and ...
Page 84 - Advanced features
84 EN Master Page: Left GR-DVM96-76U_80-103.fm Page 84 Advanced features SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 14. The focus does not adjust automatically. 14. • Focus is set to the Manual mode. • The recording was done in a dark place, or the contrast was low. • The lens is dirty or covered wit...
Page 85 - Other problems
EN 85 Master Page: Right GR-DVM96-76U_80-103.fm Page 85 Other problems 24. Although Snapshot is attempted, flash does not take place. 24. • The subject is too bright with the flash set to “AUTO” or “AUTO C ”. • If blinks, the flash is being charged. • The camcorder is in the Record mode. • In the Me...
Page 88 - CAUTIONS; General Battery Precautions; Battery Packs; Cassettes
88 EN Master Page: Left-Heading0 GR-DVM96-76U_80-103.fm Page 88 CAUTIONS When using the AC Adapter in areas other than the USA ● The provided AC Adapter features automatic voltage selection in the AV range from 110 V to 240 V. USING HOUSEHOLD AC PLUG ADAPTER In case of connecting the unit’s power co...
Page 90 - How To Handle A CD-ROM
90 EN Master Page: Left GR-DVM96-76U_80-103.fm Page 90 How To Handle A CD-ROM • Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft clot...
Page 91 - USER MAINTENANCE; After Use
EN 91 Master Page: Right-Heading0 GR-DVM96-76U_80-103.fm Page 91 USER MAINTENANCE 1 Turn off the camcorder. 2 Slide down and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette. 3 Press “...
Page 92 - SPECIFICATIONS; Camcorder
92 EN Master Page: Left-Heading0 GR-DVM96-76U_80-103.fm Page 92 SPECIFICATIONS * GR-DVM96 only Camcorder For GeneralPower supply : DC 11.0 V (Using AC Adapter)DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 4.5 W (GR-DVM96)/Approx. 3.8 W (GR-DVM76) LCD monito...
Page 93 - AC Adapter
EN 93 Master Page: Right GR-DVM96-76U_80-103.fm Page 93 Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice. For ConnectorsAV Video output : 1 V (p-p), 75 Ω , analog Audio output : 300 mV (rms), 1 k Ω , analog, ster...
Page 94 - INDEX Controls, Connectors And Indicators
94 EN Master Page: Left-Heading0 GR-DVM96-76U_80-103.fm Page 94 INDEX Controls, Connectors And Indicators 3 2 4 OFF PLA Y A M 1 56 7 8 0 q w e r t 9 GR-DVM96-76U_80-103.fm Page 94 Friday, February 15, 2002 12:31 PM
Page 95 - Indicators
EN 95 Master Page: Right GR-DVM96-76U_80-103.fm Page 95 Controls a •Power Zoom Ring [T/W] .................... 墌 pg. 20 •Speaker Volume Control .................... 墌 pg. 22 b Recording Start/Stop Button ................ 墌 pg. 19 c Power Switch [ A , M , P , OFF].......... 墌 pg. 14 d Lock Button ......
Page 96 - INDEX Indications; Indications; SOUND 1 2 B I T
96 EN Master Page: Left-Heading0 GR-DVM96-76U_80-103.fm Page 96 INDEX Indications Indications LCD Monitor/Viewfinder Indications During Video Recording Only a Selected Wipe/Fader Effect Indicator ( 墌 pg. 40, 41) b Selected Wide Mode Indicator ( 墌 pg. 46) c Tape Running Indicator ( 墌 pg. 19) (Rotates...
Page 98 - EXPLOSION
98 EN Master Page: Left GR-DVM96-76U_80-103.fm Page 98 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording a Operation Mode ( 墌 pg. 14) b • : Night-Alive Indicator ( 墌 pg. 53) (Appears when Night-Alive is engaged.) • : Gain Up Mode ( 墌 pg. 45) (Appears when “GAIN UP” is set to ...
Page 99 - S EARC
EN 99 Master Page: Right GR-DVM96-76U_80-103.fm Page 99 LCD Monitor/Viewfinder Indications During Video Playback a Sound Mode Indicator ( 墌 pg. 51) b Blank Search Indicator ( 墌 pg. 23) c Tape Speed ( 墌 pg. 44) d • U : Playback • 5 : Fast-Forward/Shuttle Search • 3 : Rewind/Shuttle Search • 9 : Pause...
Page 102 - TERMS
102 EN Master Page: Left-Heading0 GR-DVM96-76U_80-103.fm Page 102 TERMS A AC Adapter ...................................................10, 11Audio Dubbing ...................................................70Auto Focus ..........................................................55Auto Playback Of Ima...
JVC RV-NB20B
User Manual
JVC HX-Z30
User Manual
JVC MX-GT80
User Manual
JVC AV-48WP30
Manual
JVC HR-S3911U
User Manual
JVC HD-52Z575
Manual
JVC AV-27F702
Manual
JVC GR-DV500U
User Manual
JVC HR-A591U
User Manual
JVC AV-36320
Manual
JVC XV-S200BK
Manual
JVC SP-EXA1
User Manual
JVC AV-36D303
Manual
JVC FS-SD770
User Manual
JVC AV-56WP74
User Manual