JVC DT-V24G1 - Manuals

JVC DT-V24G1 – Manual in PDF format online.

Manuals:

Manual

Manual JVC DT-V24G1

Summary

Page 2 - Safety Precautions; IMPORTANT

2 Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been engi...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; IMPORTANT RECYCLING INFORMATION

Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is:JVC Technical Services Europe GmbHPostfach 10 05 0461145 FriedbergGermany Inf...

Page 4 - Installation; To detach the stand

4 Installation CAUTION • Do not rest your arm on the monitor or lean against the monitor.• Do not touch the LCD panel when installing the monitor.• Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. You can place the mon...

Page 6 - Daily Operations / Connections; Front panel

6 Daily Operations / Connections 7 Front panel p SAFETY MARKER button/lamp Displays/hides the safety marker.• Adjust the area of the safety marker in “MARKER” of MAIN MENU ( ☞ page 13). • This function does not work when displaying the picture in the 1:1 mode. • This function does not work when “SAF...

Page 8 - Rear panel

8 7 Rear panel Daily Operations / Connections (cont.) 8 The illustration of the monitor is of DT-V24G1. 1 POWER switch Turns AC power on or off.• You need to press button ( ☞ u on page 6) to use the monitor after turning on the POWER switch. 2 AC IN terminal AC power input connector.Connect the prov...

Page 9 - Attaching the power cord holder

9 ENGLISH To detach the cover AC IN terminal Case Cover 2 3 1 CAUTION • Use only the provided screws.• Make sure the plug will not be pulled out after the cover is attached to the case. Attaching the power cord holder The provided power cord holder prevents accidental disconnection of the AC power c...

Page 10 - Available signals

10 Daily Operations / Connections (cont.) 7 Available signals Video signals No. Signal name Signal format shown in the status display ( ☞ page 7) Input terminal VIDEO (INPUT1, INPUT2) COMPO./RGB(Analog component/Analog RGB)* 1 E. AUDIO SDI (IN 1, IN 2)* 2 DVI-D (HDCP) (Digital component/Digital RGB)...

Page 11 - Status indication of DUAL LINK/3G SDI signal information; NOTE

11 ENGLISH Computer signals (preset) DVI-D (HDCP) terminals No. Signal name Resolution Frequency Scan system Horizontal Vertical Horizontal (kHz) Vertical (Hz) 1 VGA60 640 480 31.5 59.9 Non-interlace 2 WVGA60 852 480 31.5 59.9 Non-interlace 3 SVGA60 800 600 37.9 60.3 Non-interlace 4 XGA60 1024 768 4...

Page 12 - Menu Configuration—MAIN MENU

12 Menu Configuration—MAIN MENU PICTURE FUNCTION Setting for the picture quality Item To do Setting value APERTURE FREQ. * 1 Select the frequency of the luminance signal compensated in “APERTURE LEVEL.” OFF, LOW, HIGH APERTURE LEVEL * 1 Compensate the frequency response of the luminance signal of th...

Page 14 - Settings of “E.AUDIO GROUP”; —Level meter position and audio channels

14 Operation guide Shows the buttons for each operation. • The menu automatically disappears in about 30 seconds after the previous operation.• Some items may not appear on the menu depending on the input or the input signal.• The items controlled by the MAKE system do not appear on the menu. AUDIO ...

Page 15 - Example of the vector scope; Example of the wave form monitor

15 ENGLISH SCOPE SETTING* 1 Settings for the wave form monitor and vector scope Item To do Setting value GAIN Adjust the gain level for the incoming wave form data. –10 – +10 SIZE * 2 Select the size of the wave form monitor and vector scope window. NORMAL, LARGE POSITION * 2 Select the position of ...

Page 16 - Menu Configuration—SET-UP MENU; Settings of “sub menu POSI.”

16 FUNCTION SETTING Settings for the sub menu display, color system, color of the tally lamp, picture size, intensity of the button lamps and the PHASE adjustment. Item To do Setting value sub menu POSI. Select the contents and displaying position of “sub menu.” ☞ “NOTE” COLOR SYSTEM Select the colo...

Page 18 - Setting of “CHARACTER SET.”

18 REMOTE SETTING Settings for the external control Item To do Setting value SERIAL TYPE Select the input terminal used for external control by serial communication. RS232C, RS485 PARALLEL TYPE Select the external control method for the MAKE/TRIGGER terminal. MAKE, TRIGGER, SET PIN1PIN2PIN3PIN4PIN5 ...

Page 20 - External Control; About the external control

20 External Control 7 About the external control This monitor has three external control terminals. • MAKE/TRIGGER termina l (RJ-45): The following external control systems are available. (1) MAKE (make contact) system : Controls the monitor by short-circuiting the corresponding pin terminal to the ...

Page 22 - Using the serial communication

22 7 Using the serial communication You can control the monitor from a personal computer etc. via the RS-485 or RS-232C terminal.• Consult your dealer for the details of the external control specification. <Communication specifications> Input terminal Cable Terminal specification Communication...

Page 24 - Troubleshooting

24 Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page No power supply • Press the b...

Page 25 - Maintenance

25 ENGLISH 7 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT lamps will flash. If this happens, follow the steps below and contact your deale...

Page 26 - Specifications; General; Input/output terminals; LCD panel

26 • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products. • Design and specifications are subject to change without notice.• All company names and product names mentioned herein are used for identif...

Page 27 - Dimensions

27 ENGLISH Specifications (cont.) 100 VESA mounting holes(Size: 4-M4, depth: 10 mm) 100 * at the higher position** at the lower position 7 Dimensions Unit: mm (inch) DT-V24G1 <Front view> <Side view> <Rear view> 51 (2 1/8) 99 (4) 52.7 (2 1/8) 1.3 (1/16) 243 (9 5/8) 100 VESA mountin...