JVC DT-V2000SU - Manuals

JVC DT-V2000SU – Manual in PDF format online.

Manuals:

Manual

Manual JVC DT-V2000SU

Summary

Page 2 - SAFETY PRECAUTIONS; FCC INFORMATION; SCREEN BURN

2 Thank you for purchasing this JVC DTV monitor. Before using it, read and follow allinstructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS WARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOTEXPOSE THIS MONITOR TO RAIN OR MOISTURE. FCC INFORMATION CAUTION: Cha...

Page 3 - CONTENTS

3 SAFETY PRECAUTIONS ............................................................................................... 2 CONTROLS AND FEATURES ....................................................................................... 4 CONNECTIONS ............................................................

Page 4 - CONTROLS AND FEATURES; FRONT VIEW; Speaker; Displays and turns off the menu screens.; POWER switch/POWER indicator; the picture appears while the monitor runs a self-test.; INPUT SELECT buttons; Select the video signal input to each terminal.; Input A button; Picture adjustment knobs

4 CONTROLS AND FEATURES FRONT VIEW <Front Panel> Speaker A built-in speaker is located in the right panel when themonitor is viewed from the front. MENU button Displays and turns off the menu screens. Notes: ● There are two menu screens: the <MAIN MENU>screen and the <SET-UP MENU> ...

Page 5 - REAR VIEW; Pin No. Signal

5 REAR VIEW <Rear Panel> AC INPUT INPUT A INPUT B INPUT C REMOTE IN/OUT AUDIO INPUT IN OUT IN (MONO) EXT SYNC OUT (RGB/COMPO.) (VIDEO) (RGB) Y/C G/Y B/P B /B-Y R/P R /R-Y HD/C S VD AC INPUT INPUT A INPUT B INPUT C REMOTE IN/OUT AUDIO INPUT IN OUT IN (MONO) EXT SYNC OUT (RGB/COMPO.) (VIDEO) (RG...

Page 6 - REMOTE IN/OUT terminal; AUDIO INPUT terminal

6 REMOTE IN/OUT terminal External control input and output terminal. Instead ofusing the INPUT SELECT button, an external controlsignal changes the INPUT mode. INPUT mode statusdata is also output through this terminal.* The terminal is DIN 8-pin (female). [REMOTE IN/OUT terminal specifications] To ...

Page 7 - CONNECTIONS; BASIC CONNECTION EXAMPLE

7 AC INPUT INPUT A INPUT B INPUT C REMOTE IN/OUT AUDIO INPUT IN OUT IN (MONO) EXT SYNC OUT (RGB/COMPO.) (VIDEO) (RGB) Y/C G/Y B/P B /B-Y R/P R /R-Y HD/C S VD CONNECTIONS Notes: ● Before connecting your system, make sure that all units are turned off. ● The illustration below shows some examples of d...

Page 8 - BASIC OPERATION; switch to; * The frequency of the input; Press the INPUT SELECT; buttons to choose the; * When the input mode is changed or the power is turned; buttons to adjust the; * The screen indication disappears; When the POWER SAVE function is valid (ON)

8 HOW TO HANDLE BASICOPERATIONS BASIC OPERATION 1. Press the POWER POWER ONOFF switch to turn on the power. ON ( _ ) : Power turns ON. (Power indicator lights ingreen.) OFF ( — ) : Power turns OFF. (Power indicator goes out.) * The frequency of the input signals (or the color system orDTV format) is...

Page 9 - OPERATION OF PICTURE ADJUSTMENT KNOBS; PHASE knob; DISPLAY OF MENU SCREENS

9 ＜ＭＡＩＮＭＥＮＵ＞ＳＩＺＥ／ＰＯＳＩＴＩＯＮＡＤＪ．ＤＩＳＴＯＲＴＩＯＮＡＤＪ．ＰＩＣＴＵＲＥＡＤＪ．ＦＵＮＣＴＩＯＮＳＥＬＥＣＴＳＴＡＴＵＳＤＥＧＡＵＳＳＳＥＬＥＣＴ：ＥＸＩＴ：ＭＥＮＵＥＮＴＥＲ： + OPERATION OF PICTURE ADJUSTMENT KNOBS PHASE knob Adjusts picture hue. CHROMA knob Adjusts picture chroma. BRIGHT knob Adjusts picture brightness. CONTRAST knob Adjusts pict...

Page 10 - sub menu] IN PROCEDURE 4

10 You can adjust the screen size and screen position. This function can be set when an INPUT A component (COMPO.)signal or INPUT B (VIDEO) signal is input with the underscan size(UNDER) selected or when an INPUT A RGB signal or INPUT C PC(RGB) signal is input. 1 Press the MENU MENU button. The <...

Page 11 - button... Values are reset.; button... Reset is aborted; Up to 12 different RGB signals input to INPUT A or INPUT C

11 You can adjust the picture distortion. This function can be set when an INPUT A component (COMPO.)signal or INPUT B (VIDEO) signal is input with the underscan size(UNDER) selected or when an INPUT A RGB signal or INPUT C PC(RGB) signal is input. 1 Press the MENU MENU button. The <MAIN MENU>...

Page 12 - * Items not displayed because of the selected input mode; PICTURE ADJUSTMENT

12 You can adjust the picture contrast, brightness, etc. 1 Press the MENU MENU button. The <MAIN MENU> screen appears. 2 Press the SELECT SELECT button to select the[PICTURE ADJ.] item. The selection mark ( 4 ) moves to the [PICTURE ADJ.] item. 3 Press the VOLUME/ ENTER button. The <PICTURE...

Page 13 - Perform adjustment with the

13 Items Contents RGB/COMPO. Sets the input signal of the INPUT A terminal to receiveRGB or component (COMPO.) signals.(RGB p[ COMPO.) RGB : RGB signal is selected. COMPO. : component signal is selected. SCAN SIZE Sets the scan size when component (COMPO.) signalsare input to the INPUT A terminal.(O...

Page 14 - Press the MENU; Press the SELECT; ENTER; Input mode; disappears after about three seconds.; User Memory for RGB Input

14 DISPLAY OF PRESENT INPUTSTATUS Connection Between Input Mode Display andFrequency (or Color System or DTV Format) Display InputMode INPUTA INPUTB INPUTC InputSignal RGB COMPONENT VIDEO Y/C RGB (PC) Frequency,Color System orDTV FormatSignal Signal within thefrequency range Signal withoutsynchroniz...

Page 15 - Recommended Input Mode List; DEGAUSSING THE SCREEN; The input modes shown in the table above are recommended.

15 Recommended Input Mode List Mode Resolution Horizontal Vertical Preset Frequency Frequency Horizontal Vertical (kHz) (Hz) NTSC 786 243 15.73 29.97 (i) 480i 720 244 15.73 29.97 (i) 480p 720 483 31.469 59.94 720p 1280 720 44.955 59.94 1080i 1920 540 33.75 30.00 (i) VGA480 640 480 31.47 59.94 VESA60...

Page 16 - POWER SAVE FUNCTION; POWER SAVE FUNCTION SETTING

16 Power Save Function Mode Normal Standby Suspended Mode Mode Mode Power 100% Less than Less than Consumption about 90% about 30% Power Lit Lit Blinks Indicator ( ) Shift Time — About 15 About 15 from Normal seconds seconds Mode Return Time — Immediate About 10 to to Normal 15 seconds Mode POWER SA...

Page 17 - ON; Notes

17 You can set the CONTROL LOCK function to disable controlbuttons and knobs on the front panel, except for the powerswitch. This function is set in the <SET-UP MENU> screen. 1 While pressing the SELECT SELECT button, press the VOLUME/ENTER button. The <SET-UP MENU> screenappears. 2 Pres...

Page 18 - WHITE BALANCE ADJUSTMENT

18 Items Contents BLUE DRIVE Adjusts the blue drive level. … Decreases the blue drive level.… Increases the blue drive level. RED DRIVE Adjusts the red drive level. … Decreases the red drive level. … Increases the red drive level. GREEN CUT OFF Sets the green cutoff point. … Decreases the green cuto...

Page 20 - TROUBLESHOOTING

20 Problems No power supply No picture withthe power on No sound Wrong color Unnatural picture Shaking picture Points to be checked Is the power plug loosened ordisconnected? Is the signal cable disconnected? Is the power of the connectedcomponent ON?Is the signal output from the connectedcomponent?...

Page 21 - Set the CONTROL LOCK function to OFF.; The following are not malfunctions:; INPUT A indicator blinks :; bus control malfunction; INPUT B indicator blinks :; deflection control malfunction

21 Problems Irregular color Wrong pictureposition, wrongpicture size Front panelbuttons andknobs do notfunction Points to be checked Is the monitor placed or moved close toa speaker or any other deviceincorporating a magnet?Has the position of the monitor beenchanged with the power on? Has the pictu...

Page 22 - SPECIFICATIONS

22 SPECIFICATIONS Type : DTV monitor Picture Tube : 20” measured diagonally, in-line gun, 90° deflection, dot-trio type (dot-trio pitch0.26 mm) Effective ScreenSize : Width : 16” (406.4 mm) Height : 12” (304.8 mm) Diagonal : 20” (508 mm) ScanningFrequency : H : 15 k/31 k — 65 kHz V : 50 — 100 Hz Vid...

Page 23 - DTV Formats; Signal Standard

23 DTV Formats 480i 480p 720p 1080i Signal Standard ITU-R BT. 601-4 SMPTE 293M SMPTE 296M SMPTE 274M Scanning Lines/Frame 525 525 750 1125 Effective Sample 720 x 485 720 x 483 1280 x 720 1920 x 1080 x Scanning Lines Field Frequency (Hz) 59.94 59.94 60/59.94 60/59.94 Line Frequency (Hz) 15734 31468.5...

Page 24 - MONITOR

JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Valley Road Wayne, N.J. 07470 JVC CANADA INC. 21 Finchdene Square, Scarborough Ontario M1X 1A7 © 1999 VICTOR COMPANY OF JAPAN, LIMITED DT-V2000SU MONITOR Printed in JapanLCT0537-001A0699-K-U-Ni LCT0573-001A(6.5J) 00.12.20, 0:40 PM 24