JVC DT-R17L4D - Manuals

JVC DT-R17L4D – Manual in PDF format online.

Manuals:

Manual

Manual JVC DT-R17L4D

Summary

Page 2 - Table of Contents

2 Table of Contents Safety Precautions 3 IMPORTANT SAFEGUARDS ............................................................................... 3Caution for use of the product for many hours...................................................... 5Caution for use of the product in the high temperature ....

Page 3 - Safety Precautions; IMPORTANT SAFEGUARDS

3 EN Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. IMPORTANT SAFEGUARDS Electrical energy can perform many useful functions. This unit has been e...

Page 4 - IMPORTANT RECYCLING INFORMATION; This product has a; IMPORTANT SAFETY INSTRUCTIONS; To prevent an accidental fall

4 Safety Precautions (cont.) Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered.Never push objects of any kind into this product through openings as they may tou...

Page 5 - Information for Users on Disposal of Old Equipment; EMC Supplement; Caution for use of the product for many hours; Screen

5 EN European Union only Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is:JVC Technical Services Europe GmbHPostfach 10 05 046...

Page 6 - Installation; To detach the stand

6 Installation CAUTION Do not rest your arm on the monitor or lean against the monitor.Do not touch the LCD panel when installing the monitor.Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. ••• To install the monitor ...

Page 7 - To install the monitor on a wall; Danger

7 EN To install the monitor on a wall You can install the monitor on a wall by changing how the stand bottom plate is attached. Installation Only for Authorized Service Personnel Consult authorized service personnel for the installation of this unit. Installation instructions must be followed precis...

Page 8 - Rear panel; Connections

8 1 POWER switch Turns AC power on or off. You need to press button ( ☞ t on page 10) to use the monitor after turning on the POWER switch. 2 AC IN terminal AC power input connector.Connect the provided AC power cord to an AC outlet. Attach the provided power cord holder to prevent accidental discon...

Page 9 - Attaching the power cord holder

9 EN 6 For DT-R24L4D: AUDIO ASSIGN (MONITOR OUT) terminals (pin jack) / For DT-R17L4D: AUDIO (MONITOR OUT) terminals (pin jack) Output terminals for the analog audio signal. For DT-R24L4D: The terminals output the audio signal through AUDIO ASSIGN (IN 1 or IN 2) terminals when you select the video i...

Page 10 - Front panel; Daily Operations

10 Front panel 1 Speakers (stereo) The speakers emit the same audio signal emitted from the AUDIO ASSIGN (DT-R24L4D) / AUDIO (DT-R17L4D) (MONITOR OUT) terminals. ( ☞ “ 6 AUDIO ASSIGN (DT-R24L4D) / AUDIO (DT-R17L4D) (MONITOR OUT) terminals” on page 9) 2 VOLUME adjustment knob Adjusts the volume. 3 ...

Page 11 - On the signal format; On the Status Display

11 EN Select audio channels emitted from the speakers (L/R) and the AUDIO ASSIGN (DT-R24L4D) / AUDIO (DT-R17L4D) (MONITOR OUT) (OUT1(L)/OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI terminal (IN1 or IN2) and SDI input (1 or 2) is selected. You have to choose a gro...

Page 12 - The operation procedure; Press buttons to select an item, then press button.; Menu Transition Diagram; Menu Con

12 The operation procedure 1 Display the menu. To display the MAIN MENU Press MENU button. To display the SET-UP MENU Press button while holding button. ¨ ¨ MAIN MENU SET-UP MENU Selected item Operation guide 2 Press buttons to select an item, then press button. For some items, adjustments will be m...

Page 13 - PICTURE FUNCTION; BACK LIGHT

13 EN MAIN MENU PICTURE FUNCTION Setting for the picture quality Item To do Setting value APERTURE *1 Activates/deactivates the function at the level set in “APERTURE LEVEL.” OFF, ON APERTURE LEVEL *1 Compensate the frequency response of the luminance signal of the video signal. 01 – 10 CTI Adjust t...

Page 14 - MARKER; AUDIO SETTING; —Level meter position and audio channels

14 Menu Con fi guration (cont.) MARKER *1*2 Settings for marker functions2/2 Item To do Setting value R-AREA MARKER *3 Activate/deactivate the area marker and select the style of it. *4 OFF, LINE, HALF, HALF+L, BLK. , BLK.+L R-MARKER ASPECT *3 Select the aspect ratio of the area marker. 4:3, 14:9, 1...

Page 16 - REMOTE SETTING

16 Menu Con fi guration (cont.) SIZE/POSI. ADJ. Adjusts the size and position of the picture. Item To do Setting value H SIZE *1 Adjust the horizontal picture size. Setting value varies depending on the signals. H POSITION *1 Adjust the horizontal picture position. V SIZE *1 Adjust the vertical pict...

Page 17 - CONTROL LOCK

17 EN INFORMATION Settings for the information display of the monitor Item To do Setting value POSITION Select the position to show the information display ( ☞ “On the Information Display” on page 11). UPPER, LOWER SOURCE ID Select whether the name assigned in “CHARACTER SET.” is displayed on the sc...

Page 18 - External Control; About the external control; Using the MAKE/TRIGGER system

18 External Control About the external control This monitor has three external control terminals. MAKE/TRIGGER termina l (RJ-45): The following external control systems are available.(1) MAKE (make contact) system : Controls the monitor by short-circuiting the corresponding pin terminal to the GND p...

Page 20 - Using the serial communication

20 External Control (cont.) Using the serial communication You can control the monitor from a personal computer etc. via the RS-485 or RS-232C terminal. Consult your dealer for the details of the external control speci fi cation. <Communication speci fi cations> Input terminal Cable Terminal s...

Page 22 - Troubleshooting

22 Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page No power supply Press the but...

Page 23 - Check which lamps are

23 EN Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT lamps will fl ash. If this happens, follow the steps below and contact your dealer to r...

Page 24 - General; LCD panel; Input/output terminals

24 Speci fi cations General Model name DT-R24L4D DT-R17L4D Type Multi format LCD monitor Screen size Type 24 wide format Type 17 wide format Aspect ratio 16:10 16:9 Horizontal/vertical frequency (computer signal) H: 31.469 kHz – 75.000 kHzV: 48 Hz – 65 Hz* Some signals within this frequency range ma...

Page 25 - Dimensions

25 EN Dimensions Unit: mm (inch) DT-R24L4D <Front view> <Side view> <Rear view> 564 (22 1/4) 300 (11 7/8) 408 (16 1/8) 413.1 (16 3/8) 99 (4) 51.9 (2 1/8) 181(7 1/4) 1.5 (1/8) 21 (7/8) 100 VESA mounting holes(Size: M4, depth: 10 mm) 100 117 (4 5/8) To install the monitor on a shel...

Page 26 - Available signals; Speci

26 Available signals The following signals are available for this monitor. Video signals No. Signal name Signal format shown in the status display ( ☞ page 11) Input terminal VIDEO (INPUT1, INPUT2) E. AUDIO HD/SD SDI (IN 1, IN 2)* 1 DVI-D (HDCP) (Digital component /Digital RGB) 1 NTSC NTSC √ — — 2 P...