JVC DM-JV600U - Manuals

JVC DM-JV600U – Manual in PDF format online.

Manuals:

Manual

Manual JVC DM-JV600U

Summary

Page 2 - IMPORTANT SAFEGUARDS

2 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth...

Page 3 - SAFETY PRECAUTIONS; ATTENTION

3 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ATTENTION RISQUE D’ELECTROCUTION NE PAS OUVRIR ATTENTION: POUR EVITER TOUT RI...

Page 4 - Thank you for purchasing this; Main Features

4 Encoded to MPEG-2(ISO/IEC13818-2) Input SMPTE292M(1080i/720p) standard HDTV digital se- rial video signal, encode it to MPEG-2(ISO/IEC13818-2) and output as DVB-ASI TS(Transport Stream). Supports SDI embedded Audio signal 2 channels Encodes SMPTE299M standard SDI embedded Audio sig- nal 2 channels...

Page 5 - Table of Contents

5 Introduction Preparation Menu setting Basic operation Main Features ...................................... 4 Table of Contents ................................. 5 Precautions .......................................... 6 Front Panel ........................................... 7 Rear Panel ............

Page 6 - Precautions

6 Maintenance and operating environment Do not store or use this equipment in the following envi-ronments. This will cause malfunctioning and damage. • Locations beyond the allowable operating temperature range of 5 °C and 40 °C. • Locations beyond the allowable operating humidity level of 30 % and ...

Page 7 - Front Panel

7 Names and Functions 1 [POWER] Power switch Switch to turn on/off power. After this is switchedto ON, a “Now Initializing” will be displayed on theDisplay 5 of front panel before normal screen is displayed. After turning on the power, it may take 2 sec-onds before display light up. 2 [ESC] button P...

Page 8 - Rear Panel

8 8 [AC IN] Power input terminal Use the power cord supplied to connect to an AC120 V 50 Hz/60 Hz outlet. 9 [HD-SDI IN] Video signal input terminal (BNC) Input terminal for HD serial digital video signal.This terminal also receives audio signal whenaudio signal is embedded into HD serial digitalvide...

Page 9 - Connecting

9 Preparation One example of the basic systems using this unit is described below. Turn OFF the power of all devices before connecting or disconnecting. R Y L VIDEO P R /C R S VIDEO S VIDEO AUDIO R IN(L-1) IN (L-2) VIDEO REMOTE PAUSE/ AV COMPULINK CABLE BOX ANTENNA AUDIO OUT OUT OUT TV IN VHF/UHF IN...

Page 10 - Mounting to a Rack

10 Foot EIA Rack Front Panel POW ER ON OFF POW ER ON OFF Do not remove the mounting bracket.The mounting may become unstable due to loosen screws. In addition, if the mounting direction of the bracket is wrong, it will be extremely dangerous as the bracket will not be properly mounted onto the rack....

Page 11 - Menu Flow Chart

11 The menu of this unit consists of 3 level of menus namely “Main menu”, “Sub menu” and “Setting items”. Men u setting Display screen HDTV ENCODER DM-JV600U Main Menu+ Configuration Menu Main Menu+ Status Menu Main Menu+ Administration Menu Configuration Menu+ Operate Param Menu Configuration Menu+...

Page 12 - Configuration Menu; Menu Setting

12 : Default setting Item Setting value Content Operate Param Menu Video Rate Asp 3-2Pulldown Audio Mode Audio Rate Start Stop 9000kbps to 20000kbps to 40000kbps When the Video Mode item in the menu is set to “1080i” 16:9 1920 × 1080 16:9 1440 × 1080 16:9 1280 × 1080 When the Video Mode item in the ...

Page 16 - How to Change Menu Setting

16 The various features of this unit can be set using the menu. The setting value, which is stored in the internal memory will reappear upon turning on the power. Example Remote control of this unitcan be achieved by usingthe RS-232C terminal onthe rear panel. [Configuration Menu] ≠ [Initial Param M...

Page 17 - Restoring the Default Menu Setting Value

17 Basic operation Operation Flow Chart Display Flow Chart D o n o t t u r n o f f t h epower switch during“Now Initializing” dis-play. Each feature that has been set using the menu can be returned to default (factory setting). All the menu settings return to default. Main Menu + C o n f i g u r a t...

Page 18 - Starting the Encoding; Start the encoding automatically

18 There are 2 ways to start the encoding. One is to start the encoding automatically and the other one is to start it manually by setting the menu. Operation Flow Chart Display Flow Chart The default setting of theStart Mode item is set to“Auto” in order to start theencoding automatically. ☞ Page 1...

Page 19 - Start the encoding manually

19 Basic operation Operation Flow Chart Display Flow Chart Set the Start Mode item in the menu to “Manual” ac-cording to the procedure on ☞ P a g e 1 8 “ S t a r t t h ee n c o d i n g a u t o m a t i -c a l l y ” . Operation Flow Chart Display Flow Chart The encoding will stop if menuitem has been ...

Page 20 - Checking Operation Status

20 The operation status of this unit can be confirmed from the display. Operation Flow Chart Display Flow Chart Indicate that the encodingis in process. Main Menu + C o n f i g u r a t i o n M e n u Main Menu +Status Menu Status Menu - S t a t u s : R u n n i n g Status Menu - S t a t u s : R u n n ...

Page 21 - Checking Error Log

21 Basic operation Operation Flow Chart Display Flow Chart The error occurrence can be confirmed on the display. Up to 64 occurrences can be stored. Main Menu + C o n f i g u r a t i o n M e n u Main Menu +Status Menu Status Menu - S t a t u s : R u n n i n g Status Menu +Log 0 0 : F e b 0 7 1 4 : 0...

Page 22 - Using the Administration Menu

22 The information regarding built-in program or firmware version can be obtained from theAdministration Menu. In addition, clock setting and the display brightness could be adjusted.* Please carry out the clock setting before use. Operation Flow Chart Display Flow Chart Main Menu + C o n f i g u r ...

Page 23 - Administration menu

23 Basic operation Item Content Model SerNo Time FL Brghtness(Initial Setting: 0) Firm Ucode Boot MISC FPGA STC FPGA I/O PWB I/O VI PLD I/O AU PLD Displays the model name. Displays the serial number. Setting the Clock. Year/Month/Day Hour : Minute (For the Year setting, only the last 2 digits of the...

Page 24 - Error Log

24 The stored error log can be displayed by performing the operation on page 21 “Checking Error Log”. The error content is displayed by error code. 00 : Feb07 14 : 06 0001-system boot a a: Error log No.b: Error occurrence datec: Error occurrence timed: Error codee: Error content * For the error cont...

Page 25 - Error code

25 Other s Error code:Error content 0002:parameter error 0008:FAN stop error 0009:FAN stop error recover 001a:FAN stop timeout error 0013:hardware fatal error 0014:software fatal error 0015:system boot fatal error 0044:video frame interrupt timeout error 0045:video frame interrupt timeout error reco...

Page 26 - Setting the 3-2 Pulldown; Encoding image film material; -2 Pulldown auto setting

26 It is required to convert the video signal (Pulldown) in order to view the image recorded with 24 frames per second such as movie film on a system for HDTV video signal that is 30 frames per second (60 field) used in TV broadcasting. Normally, HDTV VTR utilize 3 - 2 Pulldown (Telecine) method to ...

Page 27 - Specifications

27 Video input HD SDI IN × 1 Audio inputAES/EBU IN × 1 Synchronized inputREF IN × 1 Video outputMONITOR OUT × 1 ASI OUT × 2 Dolby™ Digital(AC-3) PassThrough Interface Power supply Power consumption Allowable operating temperature Allowable storage temperature Allowable operating humidity Mass Instru...