JVC CA-MXDVA9 - Manuals

– 2 – Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3Remote Control .......................................................... 5 Getting Started ......................................................

– 3 – Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel Front Panel 1 4 5 7 89 qw e rt y 3 h s ; u i o a / z c x kl j g f d 2 6 p v b EN01-10.CA-MXDVB10,B9,A9_f 02.4.24, 9:41 AM 3

– 4 – See pages in the parentheses for details. Front Panel 1 Disc trays 2 STANDBY/ON button and STANDBY lamp (11, 45, 46) 3 Remote sensor 4 PRESET + / – control (15) 4 / ¢ (reverse search/forward search) control (11, 14, 20, 21, 24, 26, 34, 44 – 46) 5 Display window 6 TAPE 2 3 button and lamp (12, ...

– 5 – When using the remote control, point it atthe remote sensor on the front panel. Remote Control Remote Control 1 FM/AM button (12, 15) Pressing this button also turns on the unit. FM MODE button* (15) 2 AUX button (12) Pressing this button also turns on the unit. 3 SUBTITLE button (18) 4 DISPLA...

– 6 – Getting Started Supplied Accessories Make sure that you have all the following items.The number in the parentheses indicates the quantity of thepieces supplied. • AM loop antenna (1)• FM antenna (1)• Remote control (1)• Batteries (2)• AC plug adaptor (1)• Composite video cord (1) If anything i...

– 7 – 1 Connect the AM loop antenna to the AMLOOP terminals as illustrated. • If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it asshown in the diagram. 2 Turn the AM loop antenna until you have thebest reception. To connect an outdoor AM antenna When reception is poo...

– 8 – Connecting Other Equipment You can connect both analog and digital equipment. • DO NOT connect any equipment while the unit is on. • DO NOT plug in any equipment until all connections are complete. To connect an analog component Be sure that the plugs of the audio cords are colored: Whiteplugs...

– 9 – About sounds output through the rear terminals • Through the AUX OUT (RIGHT/LEFT) jacks: Analog stereo signals are output.When playing a source encoded with Dolby Digital*( ) or with MPEG Multichannel ( ), multichannel signals are mixed to the right front and leftfront channels, then output. Y...

– 10 – Use a screwdriver to rotate the voltage selector so the voltagenumber the voltage mark is pointing at is the same as thevoltage where you are plugging in the unit. (See the backcover page.) DO NOT plug in before setting the voltage selectoron the rear of the unit and all connectionprocedures ...

– 11 – Common Operations Turning On or Off the Power To turn on the unit, press STANDBY/ON so that the STANDBY lamp goes off. To turn off the unit (on standby), press STANDBY/ON again so that the STANDBY lamp lights up. • A little power is always consumed even while the unit is on standby. To switch...

– 12 – Selecting the Sources To listen to the FM/AM broadcasts, press FM/AM. (See page 15.) To playback discs, press DVD 3¥8 (or DVD 3 on the remote control). (See pages 16 – 29.) To playback tapes, press TAPE 2 3 . (See page 30.) To select the external equipment as the source, press AUX. When you p...

– 13 – D.CLUB (Dance CLUB) OFF (Canceled) HALL STADIUM ROCK POP CLASSIC MANUAL 1 MANUAL 2 MANUAL 3 The SOUND MODE indicatoralso lights up on the display. Selecting the Sound Modes You can select one of the 6 preset sound modes. This functiononly affects the playback sound, but does not affect yourre...

– 14 – Creating Your Own Sound Modes—Manual Mode You can create SEA patterns to suit your preference. Thesechanged settings can be stored in the MANUAL 1,MANUAL 2, and MANUAL 3 modes.• There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1...

– 15 – Listening to FM and AM Broadcasts Tuning into a Station 1 Press FM/AM. The unit automatically turns on andtunes into the previously receivedstation (either FM or AM).• Each time you press the button, the band alternates between FM and AM. 2 Start searching for stations.On the unit:Press and h...

– 16 – Playing Back Discs—Introduction Disc Mark Video Region Code Type (Logo) Format Number * COMPACT DIGITAL AUDIO DVD VIDEO NTSC PAL 2, 3, 4 or ALL Video CD Audio CD Discs you can play This unit has been designed to play back discs having themarks listed below. CD-R ** CD-RW ** • On some discs, t...

– 17 – Disc Structure DVD A DVD disc consists of Titles , and each title may be divided into some Chapters . For example, if a DVD disc contains some movies, eachmovie may have its own title number, and it may be furtherdivided into some chapters. How sounds are recorded on DVD The digital audio for...

– 18 – Selecting the Subtitle For DVD and SVCD While playing a disc containing subtitles in differentlanguages, you can select the subtitle to be displayed on theTV screen.• You can set your favorite subtitle language as the initial language shown on the screen. (See page 39.) On the remote control ...

– 19 – Basic Disc Playback Disc number Disc indicator Disc marker This unit cannot accept any disc operations while readingdisc contents. Loading Discs On the unit ONLY: 1 Press 0 for the disc tray (DVD1, DVD2, or DVD3) you want toload a disc onto. The unit automatically turns on and thedisc tray co...

– 20 – DVD CONTROL REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH REPEAT CHAPTERGO TO CHAPTER = Current disc information (See page 17.) Disc playing information Off (No indication) While playing back a disc encoded with Dolby Digital, the DOLBY DIGITAL lamp on the front panel lights up. If it hasmultich...

– 21 – 1 : Current disc number 2 : Current title number 3 : Current chapter number 4 : Elapsed playing time of the current title 5 : Transmission rate SVCD/VCD/CD Playback • To play back a DVD see page 19.• While playing a SVCD or VCD with the PBC function loaded on the disc trays, the playback will...

– 22 – Reverse Search To fast-reverse the chapter or track, press 1 while playing a disc.• Each time you press the button, the search speed changes as follows: To go back to normal play, press DVD 3¥8 (or DVD 3 on the remote control). No sound comes out during Forward/Reverse Search. Prohibiting Dis...

– 23 – Menu-Driven Playback PBC operation concept Menu Operations Menu-driven playback is possible while playing back a DVDwith menu-driven features or a SVCD or VCD with thePlayback Control (PBC) function. 7 When playing a DVD DVD discs generally have their own menus or title lists. Amenu usually c...

– 24 – Selecting Playback Modes This unit cannot accept any disc operations while readingdisc contents. Programming the Playing Order of the Titlesand Tracks—Program Play You can arrange the order in which the titles (for DVD) andtracks (for SVCD, VCD and CD) play before you startplaying. You can pr...

– 25 – On the remote control: 1 Load discs. • If the current playing source is not the DVD/SVCD/ VCD/CD player press DVD 3 , then 7 before going to the next step. 2 Press PLAY MODE. The play mode screen appears on the TV. 3 Press CONTROL + or − to move to “PROGRAM,”then press ENTER. The program scre...

– 26 – Playing at Random—Random Play The titles and tracks of all loaded discs are played at random.• When you use Random play for a SVCD or VCD with the PBC function activated, the PBC function is turned off. • Random Play cannot be used on some DVD discs. On the unit: 1 Load discs. • If the curren...

– 28 – Still Picture/Frame-by-Frame Playback You can still a picture and advance the still picture frame byframe. Still picture On the remote control ONLY:Press 8 once during play. A still picture appears on the TV screen. Frame-by-frame playback On the remote control ONLY:Press 8 repeatedly during ...

– 29 – Selecting the Picture Brightness—Theater Position You can select picture brightness from among three optionsaccording to the source program, lighting condition of theroom and/or personal preference. On the unit:Press THEATER POSITIONduring play.On the remote control:Press THEATERPOSITION whil...

– 30 – You can play back type I, type II, and type IV tapes withoutchanging any settings. Playing Back a Tape 1 Press EJECT ( 0 ) for the deck you want to use. 2 Put a cassette in with the exposed part of thetape down. 3 Close the cassette holder gently. If you put cassettes in both decks A and B, t...

– 31 – Using DSP Surround Mode S THEATER L THEATER LIVECLUB PAVILION CHURCH OFF (DSP off) In order to reproduce a more acoustic sound field in yourlistening room while playing any source, you can usefollowing DSP Surround modes.• DSP Surround mode can be also used for a disc encoded with Dolby Digit...

– 32 – Recording Recording a Tape on Deck B On the unit ONLY: 1 Press EJECT 0 for the deck B. 2 Put a recordable cassette into deck B. 3 Close the cassette holder gently. 4 Start playing the source—FM, AM,DVD/SVCD/VCD/CD player, deck A, orauxiliary equipment connected to AUX jacks. • When the source...

– 33 – SVCD/VCD/CD Direct Recording You can easily record sound of a SVCD or VCD without thePBC function or CD onto a tape.• You can also record the tracks in order you have made the program. • This function cannot be used for recording DVDs. On the unit ONLY: 1 Put a recordable cassette into deck B...

– 34 – Auto Edit Recording By using Auto Edit Recording, you can record disc tracks tofit the tape. Auto Edit Recording makes a program byselecting disc tracks in numerical order. However, to preventthe end of the last track on the front side from being cut off,the last track is selected so as to fi...

– 35 – Using the Microphones To apply an echo to your voice You can apply echo effect to your voice. On the remote control ONLY:Press ECHO while holdingdown SHIFT. • Each time you press the buttons, the echo level changes as follows.As the number increases, astronger echo effect applies toyour voice...

– 36 – To use microphone only Without any background sound, you can use yourmicrophone(s), and record it if you want. 1 Connect the microphone(s). 2 Press DVD 3 / 8 (or DVD 3 on the remote control), then 7 . No background sound will be heard. 3 Turn MIC LEVEL andVOLUME as you sing into themicrophone...

– 38 – Operating the On-Screen Menu Using the on-screen menus, you can store the initial selectionfor subtitle languages and audio languages (sound) for DVDplayback as well as other settings.• The on-screen menu disappears if no operation is done for five minutes. Buttons you use to operate on-scree...

– 39 – Changing the Initial Language Settings On LANGUAGE menu, you can select the following initiallanguages. • MENU LANGUAGE : Select the DVD menu language. Selectable languages—ENGLISH, SPANISH, FRENCH,CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU(Language code: see page 52.) • AUDIO LANGUAGE : Sel...

– 40 – More about “SPEAKER SETTING” The following example shows the ideal speaker locations forsurround reproduction in your listening room. If you can locate the speakers as the above example, you canselect “ 5.1CHANNEL ” for your speaker setting. If you can NOT do as above, select “EXPERT,” then p...

– 41 – 7 Adjusting the subwoofer output levels You can adjust the output level according to your preference. 1 Display EXPERT SPEAKER SETTING menu. • See page 38. 2 Press Cursor ( 5 / ∞ / 3 / 2 ) to move to “SUB WOOFER,” then press ENTER. • You can adjust the output level from “–6 dB” to “+6 dB.” 3 ...

– 42 – 7 Monitor types • 4:3 LB (Letter Box) : Select this when viewing on TV whoseaspect ratio is 4:3.While viewing a wide screenpicture, the black bars appear onthe top and the bottom of thescreen. • 16:9 WIDE : Select this when viewing on TV whose aspectratio is 16:9. • 4:3 PS (Pan Scan) : Select...

– 43 – Using the Parental Lock Setting the Parental Lock Level Using this function, you can restrict playback of DVDcontaining violent scenes (and those not suitable for yourfamily members).• This function is only possible for the DVDs containing such rating level information—Level 1 (most restricti...

– 44 – Using the Timers There are three timers available—Daily Timer, RecordingTimer, and Sleep Timer. Before using the timers, you need to set the clock built in theunit. (See page 11.) Using Daily Timer With Daily Timer, you can wake to your favorite music orradio program. You can set the timer wh...

– 45 – 5 Turn 4 / ¢ to select the source to play, then press SET. • The source changes as follows: TUNER FM : tunes into a specified preset FM station. = Go to step 6. TUNER AM : tunes into a specified preset AM station. = Go to step 6. DISC– – – : plays a disc from a specified title or track of a s...

– 46 – 4 Set the on-time you want theunit to turn on at. 1) Turn 4 / ¢ to set the hour, then press SET. 2) Turn 4 / ¢ to set the minute, then press SET.“OFF TIME” appears for 2 secondson the display, then the unit entersoff-time setting mode. 5 Set the off-time you want the unit to turn off(on stand...

– 47 – Timer Priority Since each timer can be set separately, you may wonder whathappens if the setting for these timers overlaps.Here are examples. Recording Timer has priority over Daily Timer and SleepTimer. • If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will n...

– 48 – Using AV COMPU LINK Control System The AV COMPU LINK control system allows you to useJVC’s TV with simple operations.To use AV COMPU LINK control system, you need toconnect this unit and a TV through the AV COMPU LINKterminals.• You can connect a TV that has AV COMPU LINK II or AV COMPU LINK ...

– 49 – To get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil inone of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in thecas...

– 50 – If you are having a problem with your unit, check this list for a possible solution before calling for service.If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,such as your dealer, for service. Symptom Unable to cancel...

– 51 – They differ according to the “DIGITAL AUDIO OUTPUT” setting. (See page 39.) Appendix C —Output Signals Through the OPTICAL DIGITAL OUTPUT Terminal Appendix D —Channel Display Display LFE Channel 1/0 CH C ONLY 1/0.1 CH ON C ONLY 2/0 CH L/R 2/0.1 CH ON L/R 2/0 CH L/R (L0/R0) 2/0.1 CH ON L/R (L0...

– 52 – Code Language AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Tibetan BR Breton CA Catalan CO Corsican CS Czech CY Welsh DA Danish DZ Bhutani EL Greek EO Esperanto E...

– 53 – Appendix F —Country Code for Parental Lock Code Country AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaijan BA B...

– 55 – Appendix G —Glossary 4:3 Letter Box screen This is one method for displaying a wide screen picture on aconventional sized (4:3) TV. While viewing a wide screen picture,the black bars appear on the top and the bottom of the screen. 4:3 Pan-Scan screen This is one method for displaying a wide s...

– 56 – Specifications Design and specifications are subject to change without notice. CA-MXDVB10 / CA-MXDVB9 Output Power FRONT SUBWOOFERS: 90 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. FRONT MAIN SPEAKERS: 45 W per channel, min. RMS, driven in...

— SAFETY INSTRUCTIONS — “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” INSTRUCTIONS SPEAKER SYSTEM SP-MXDVB10 Consists of SP-XDVB10, SP-WDVB10, SP-XSDVB10 and SP-XCDVB10 This equipment has been designed and manufactured to meetinternational safety standards but, like any electrical equipment, ca...

2 Thank you for purchasing JVC speakers. Before you begin using them, please read the instructions carefullyto be sure you get the best possible performance. If you have anyquestions, consult your JVC dealer. Le estamos muy agradecidos por haber adquirido estos altavocesde JVC. Antes de utilizarlos,...

3 MAIN SPEAKER SYSTEM : SP-XDVB10SUBWOOFER : SP-WDVB10 SISTEMA DE ALTAVOZ PRINCIPAL : SP-XDVB10SUBWOOFER : SP-WDVB10 SISTEMA DE ALTO-FALANTE PRINCIPAL : SP-XDVB10SUBWOOFER : SP-WDVB10 SPEAKER FOR A/V COMBINATION SP-XDVB10 and SP-WDVB10 have a magnetically-shielded design forplacement adjacent to TV’...

4 CONNECTION • DON’T use other amplifier to operate this speaker system except for CA-MXDVB10. • Turn off power to the whole system before connecting the speak- ers to the amplifier. • The maximum power handling capacity of the SP-XDVB10 main speaker is 40 W/Subwoofer is 100 W. Excessive input will ...

7 CENTER & SURROUND SPEAKER SYSTEM SPEAKER FOR A/V COMBINATION SP-XCDVB10 have a magnetically-shielded design for placement adjacent to TVs and moni-tors without causing color aberrations. However, color may be affected as a result of how thespeaker system is installed. Therefore, be careful of ...