JVC AV-29MS16, AV-29SS16, AV-25MS16, AV-21MS16 - Manuals

JVC AV-29MS16, AV-29SS16, AV-25MS16, AV-21MS16 – Manual in PDF format online.

Manuals:

Manual

Manual JVC AV-29MS16, AV-29SS16, AV-25MS16, AV-21MS16

Summary

Page 2 - Thank you for buying this JVC colour television.

2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: T O E N S U R E P E R S O N A L S A F E T Y, O B S E R V E T H E FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of ...

Page 3 - Knowing your TV’s features; Con; Main features; II

3 Knowing your TV’s features EXIT RM-C1286 Con fi rm your TV’s functions Some functions written in this instruction manual may not be available for your TV.Please see the chart below and check the functions that are equipped for your TV’s model number. The model number is indicated at the rear of yo...

Page 4 - Remote control buttons and basic functions; To

4 Remote control buttons and basic functions EXIT RM-C1286 1 6 3 7 9 5 8 2 !4 " No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and con fi rm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. ...

Page 5 - Remote control buttons and basic functions (continued); How to operate menus and menus locations

5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations To Operation Note Dis...

Page 6 - TV buttons and functions; Front of the TV; How to operate the menus with the TV button

6 TV buttons and functions The illustrations shown below is for AV-21MS16 and AV-29SS16 only, which are used for explanation purpose.Your TV may not look exactly the same as illustrated. POWER TV/VIDEO MENU/OK CHANNEL VOLUME RV L/MONO IN(VIDEO-3) Front of the TV AV-29SS16 Rear of the TV AV-29SS16 6 ...

Page 7 - Connecting the main plug to the AC outlet.; Setting up your TV; CAUTION; • Turn off the equipment including the TV before connecting.; Connecting the aerial cable.

7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by foll...

Page 8 - Making the initial settings

8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language. • TV will start searching for the channels. To stop AUTO PROGRAM, press MENU/OK button. Setting...

Page 9 - COLOUR SYSTEM; PICTURE MODE; To operate this function with a menu:; Basic setting for picture; About the basic operations of the menu, please see the “How to

9 COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears.Press the COLOUR SYSTEM button to select a setting. To operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE You can choose ...

Page 10 - PICTURE SETTING; Select USER in PICTURE MODE under PICTURE menu.; WHITE BALANCE

10 PICTURE SETTING You can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select USER in PICTURE MODE under PICTURE menu. 2 Select PICTURE SETTING in PICTURE menu, then adjust the setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP...

Page 11 - Advanced setting for picture

11 AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness of your room.Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1 Mild contrast (recommended.) MODE-2 Even contrast. DISPLAY Display the graphic of the function. To operate this function ...

Page 12 - SOUND SYSTEM; Basic setting for sound; SOUND MODE

12 SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally.Press the SOUND SYSTEM button to select a setting. This function is not available in video mode.For the sound system in each country or region, see the table below: Basic sett...

Page 13 - Advanced setting for sound; MaxxBass

13 CINEMA SURROUND You can enjoy an enhanced sound for wider audience.Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO.To operate this function with a men...

Page 14 - DVD Menu; DVD SOUND MODE

14 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically. And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choos...

Page 15 - Customized setting; VNR

15 Customized setting VNR You can reduce the picture noise.Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, th...

Page 16 - DISPLAY; ON OFF PR LIST; BEEP

16 Customized setting (continued) DISPLAY You can display the programme number, video terminal number and PR list on the screen.Press the DISPLAY button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLAY button to display the PR LIST. 2 Select a programme number...

Page 17 - TV channel presetting

17 To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the chann...

Page 18 - To add in the new channel

18 To add in the new channel (INSERT in the EDIT menu) You can add in new channels in the TV channel list as you like.You need to fi nd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 19. 1 Display ...

Page 19 - Channel

19 TV channel presetting (continued) CH/CC number When you want to use the INSERT function o n p a g e 1 8 , f i n d t h e C H / C C n u m b e r corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast...

Page 20 - Before connecting; • Read the manuals provided with the devices for the proper; Connecting to front video input terminals; Additional preparation; Connecting to rear component/video input; Front of TV

20 V L R R L/MONO Y C B C R /V V S OVER L R /MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for AV-21MS16 and AV-29SS16 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the ma...

Page 21 - Troubleshooting

21 Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV. Keep the device apart from your TV. Altern...

Page 22 - Speci; Receives cable channels in mid band, super band and hyper band.

© 2006 Victor Company of Japan, Limited 0606-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band....

Page 23 - INSTRUCTIONS; COLOUR TELEVISION; EQUALIZER • CINEMA SURROUND • COMPONENT INPUT; Contents

INSTRUCTIONS GGT0120-001A-H AV-2988SEAV-2986MEAV-2986SEAV-2956BEAV-2956ME AV-2586ME AV-2186MEAV-2156BEAV-2156ME COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Contents Knowing your TV’s features .......................................................3Remote control buttons and basic...

Page 34 - PIP; Original features for picture; TELETEXT; You can watch the Teletext broadcast channel with TEXT function.

12 PIP Display the sub picture. To cancel, press the PIP button again. Notes: • You can hear the sound from the main picture only.• When main picture and sub picture are the same TV channel. Press SUB-P -/+ Main picture will be changed TV channel follow as sub picture. Press ( Input ) To change sub ...

Page 46 - TV RF systems; Power requirements; Please see the table in the description “TEXT LANGUAGE” on page 13.; Please

© 2006 Victor Company of Japan, Limited 0506-FLE-JMT Speci fi cations TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band....

Page 54 - êìëëäàâ

8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language*. • Press 5 / ∞ button to select your desired Teletext language group*. For details, see page 13...