JVC AV-21MS15, AV-29MS15 - Manuals

JVC AV-21MS15, AV-29MS15 – Manual in PDF format online.

Manuals:

Manual

Manual JVC AV-21MS15, AV-29MS15

Summary

Page 2 - Thank you for buying this JVC colour television.

2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV.2 Avoid damaging th...

Page 3 - Knowing your TV’s features; Confirm your TV’s functions; Main features; DVD FUNCTION

3 Knowing your TV’s features EXIT RM-C1286 Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV.Please see the chart below and check the functions that are equipped for your TV’s model number. Themodel number is indicated at the rear of your ...

Page 4 - Remote control buttons and basic functions; Press

4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 !4 EXIT RM-C1286 No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME...

Page 5 - Remote control buttons and basic functions (continued); II; How to operate menus and menus locations

5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual,location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. To Display the MENU Display the topmenu Display the 2ndmenu Dis...

Page 6 - TV buttons and functions; Front of the TV

6 TV buttons and functions IN (VIDEO-3) V R MENU OK EXIT POWER TV/VIDEO - CHANNEL + - VOLUME + L/MONO 8 7 5 6 4 3 2 1 ! 9 Front of the TV AV-21MS15 Rear of the TV AV-21MS15/AV-29MS15 IN (VIDEO-3) V R L / MONO MENU OK CHANNEL VOLUME POWER 2 4 3 1 8 7 6 ! 9 V L R R L/MONO Y C B C R /V V S OVER L R /MO...

Page 7 - Connecting the compatible main plug to the AC outlet.; Setting up your TV; CAUTION; • Turn off the equipment including the TV before connecting.; Connecting the aerial cable.; Turn on the TV by pressing the main power button.

7 2 Connecting the compatible main plug to the AC outlet. Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batter...

Page 8 - Making the initial settings

8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: • Press 5 / ∞ button to select your desiredlanguage. • TV will start searching for the channels. To stop AUTOPROGRAM, pressMENU/OK button. Setting...

Page 9 - COLOUR SYSTEM; To operate this function with a menu:; PICTURE MODE; *TINT can only be adjusted in NTSC system.; Basic setting for picture

9 COLOUR SYSTEM You can select the appropriate colour system when the picture isnot clear or no colour appears.Press the COLOUR SYSTEM button to select a setting. To operate this function with a menu: For the colour system in each country or region, see the tablebelow: PICTURE MODE You can choose th...

Page 10 - PICTURE SETTING; Select the USER in PICTURE MODE under PICTURE menu.; WHITE BALANCE

10 PICTURE SETTING You can adjust the desired picture setting when selecting USERin PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjustthe setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter...

Page 11 - Correcting the Slanting Picture (PICTURE TILT); The following display appears.; BLUE BACK; Advanced setting for picture

11 AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness ofyour room.Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1 Mild contrast (recommended.) MODE-2 Even contrast. DISPLAY Display the graphic of the function. To operate this function w...

Page 12 - SOUND SYSTEM; Basic setting for sound; SOUND MODE

12 SOUND SYSTEM You can select an appropriate sound system when abnormalsound occurs even when the picture appears normally.Press the SOUND SYSTEM button to select a setting. This function is not available in video mode.For the sound system in each country or region, see the tablebelow: Basic settin...

Page 13 - Advanced setting for sound

13 CINEMA SURROUND You can enjoy an enhanced sound for wider audience.Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when the SOUND MODE is set toSOUND TURBO.To operate this function with a ...

Page 14 - DVD function; For details, see “WHITE BALANCE” on page 10.

14 DVD function AUTO SIGNAL DETECT When the DVD input signal is detected. The input mode will bechanged to VIDEO-2 automatically. For The DVD player, press the “POWER ON” button of themachine so that the signal can be detected. For the VCR, press the “POWER ON” button of the machine, andthen press t...

Page 15 - Customized setting; VNR

15 MENU FEATURES menu CHILD LOCK ❇ Customized setting VNR You can reduce the picture noise.Select the VNR in the PICTURE menu, then choose a setting ofVNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becom...

Page 16 - DISPLAY; SETUP TOUR

16 Customized setting (continued) DISPLAY You can display the programme number, video terminal numberand PR list on the screen.Press the DISPLAY button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLAY button to display the PR LIST. 2 Select a programme number ...

Page 17 - To register the TV channels automatically; TV channel presetting

17 To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel listautomatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button.AUTO PROGRAM function starts, and the channels receivedare registered in the channel ...

Page 19 - Country; Channel

19 TV channel presetting (continued) CH/CC number When you want to use the INSERTfunction on page 18, find the CH/CCnumber corresponding to the channelnumber of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia,etc.. OIRT Easter...

Page 20 - Before connecting; • Read the manuals provided with the devices for the proper; Connecting to front video input terminal; Additional preparation; Front of TV

20 V L R R L/MONO Y C B C R /V V S OVER L R /MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV.• Note that connecting cables are not supplied. Connecting to front v...

Page 21 - Troubleshooting

21 Troubleshooting If a problem occurs when you are using the TV, check the belowtroubleshooting guide before calling for repair. • Deactivate the BLUE BACK function if it is turned on.• Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12. • Check the aerial cable and its connect...

Page 22 - Specifications; Design and specifications subject to change without notice.

© 2005 Victor Company of Japan, Limited 0305-FLE-JMT Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band. Po...

Page 23 - INSTRUCTIONS; Contents; COLOUR TELEVISION; EQUALIZER • CINEMA SURROUND • COMPONENT INPUT

INSTRUCTIONS GGT0067-001B-H AV-29JS25 AV-21MS25 AV-29MS25 AV-21MX55 AV-29MX55 AV-21MX75 AV-29MX75 AV-21VX15 AV-29VX15 AV-21WX25 AV-29VX25AV-29WX25 AV-25MS25AV-25MX55AV-25MX75AV-25VX15 Contents Knowing your TV’s features ....................................................... 3 Remote control buttons...

Page 30 - êìëëäàâ

8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: • Press 5 / ∞ button to select your desiredlanguage*. • Press 5 / ∞ button to select your desiredTeletext languagegroup*. For details,see page 13....

Page 34 - PIP; Original features for picture; TELETEXT; You can watch the Teletext broadcast channel with TEXT function.

12 PIP You can display a sub picture on the screen.Press the PIP operation buttons to display and change the subpicture setting. PIP Display the sub picture.To cancel, press the PIP button again. Notes: • You can hear the sound from the main picture only.• Main picture and sub picture will use diffe...

Page 46 - TV RF systems; Please see the table in the description “TEXT LANGUAGE” on page 13.; confirm with the chart on page 3.

© 2005 Victor Company of Japan, Limited 0405-FLE-JMT Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band. Po...