JVC AV-21DX14, AV-20NX14 - Manuals

JVC AV-21DX14, AV-20NX14 – Manual in PDF format online.

Manuals:

Manual

Manual JVC AV-21DX14, AV-20NX14

Summary

Page 2 - Thank you for buying this JVC colour television.

2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV.2 Avoid damaging th...

Page 3 - Knowing your TV’s features; Confirm your TV’s functions; AI VOLUME

3 Knowing your TV’s features Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV.When you press a button concerned to a function that is not available for your TV, it does not work and thelogo “Ø” appears on the screen. For a function that i...

Page 4 - Remote control buttons and basic functions; Press

4 Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME -/+ Adjust the volume level. 6 T...

Page 5 - Remote control buttons and basic functions (continued); How to operate menus and menus locations

5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual,location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. To Display the MENU Display the topmenu Display the 2ndmenu Dis...

Page 6 - TV buttons and functions; Front of the TV

6 TV buttons and functions 9 8 7 6 5 4 IN (VIDEO-3) V R L / MONO CHANNEL VOLUME POWER 2 1 MENU TIMER OK 3 Front of the TV AV-20NX14 Rear of the TV AV-20NX14/AV-21DX14 9 8 7 6 5 IN (VIDEO-3) V R L / MONO CHANNEL VOLUME POWER 2 1 MENU 4 OK TIMER 3 V L R R L/MONO Y C B C R /V V L R /MONO OUTPUT VIDEO-1...

Page 7 - CAUTION; Turn off the equipment including the TV before connecting.

7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCRand the aerial jack on the TV with the aerial cable. Then connect theoutput jacks of your VCR and the VIDEO-1 input jacks of the TVwith the video cable and audio cables. For details, see the manualof you...

Page 8 - Making the initial settings

8 5 Making the initial settings Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below: • Press 5 / ∞ button to select your desiredlanguage, then pressMENU/OK button. • TV will start searching for the channels. To stop AUTOPROGRAM, pressME...

Page 9 - COLOUR SYSTEM; To operate this function with a menu:; PICTURE MODE; *TINT can only be adjusted in NTSC system.; Basic setting for picture

9 COLOUR SYSTEM You can select the appropriate colour system when the picture isnot clear or no colour appears.Press the COLOUR SYSTEM button to select a setting. To operate this function with a menu: For the colour system in each country or region, see the tablebelow: PICTURE MODE You can choose th...

Page 10 - Adjusting the picture – USER; Select the USER in PICTURE MODE under PICTURE menu.; WHITE BALANCE

10 Adjusting the picture – USER You can adjust the desired picture setting when selecting USERin PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjustthe setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker...

Page 11 - BLUE BACK; Advanced setting for picture

11 BLUE BACK You can set the TV to automatically change to a blue screen andmute the sound if the signal is weak or absent, or when there isno input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON orOFF. If you wish to continue viewing the poor picture, cancel the BLUEBACK ...

Page 12 - SOUND SYSTEM; Basic setting for sound; SOUND MODE

12 SOUND SYSTEM You can select an appropriate sound system when abnormalsound occurs even when the picture appears normally.Press the SOUND SYSTEM button to select a setting. This function is not available in video mode.For the sound system in each country or region, see the tablebelow: Basic settin...

Page 13 - CINEMA SURROUND; Advanced setting for sound

13 CINEMA SURROUND You can enjoy an enhanced sound for wider audience.Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect. MONO Listen to mono sound with stereo effect...

Page 14 - To register the favorite channel; Favorite channel and video setting; To adjust the video setting (VIDEO SETTING)

14 To register the favorite channel You can register and recall 4 favorite channels by using thecolour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR01-99) you desired to register. 2 Press and hold a colour button for 3 seconds or more.“FAVORITE CHANNEL ■ PROGRAMMED!” appe...

Page 15 - Customized setting; CHILD LOCK

15 VNR You can reduce the noise.Select the VNR in the PICTURE FEATURES menu underPICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select...

Page 17 - To register the TV channels automatically; TV channel presetting

17 To register the TV channels automatically You can register the TV channels into the TV’s channel listautomatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button.AUTO PROGRAM function starts, and the channels receivedare registered in the channel list (PR list) ...

Page 19 - Country; Channel

19 TV channel presetting (continued) CH/CC number When you want to use the INSERTfunction on page 18, find the CH/CCnumber corresponding to the channelnumber of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia,etc.. OIRT Easter...

Page 20 - Before connecting; • Read the manuals provided with the devices for the proper; Connecting to front video input terminal; Additional preparation; Front of TV

20 V L R R L/MONO Y C B C R /V V L R /MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT . Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV.• Note that connecting cables are not supplied. Connecting to front video ...

Page 21 - Troubleshooting

21 Troubleshooting If a problem occurs when you are using the TV, check the belowtroubleshooting guide before calling for repair. • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12. • Check the aerial cable and its connec...

Page 22 - Specifications

22 TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO input, AUDIO L/R input VIDEO...

Page 23 - MEMO