JVC AV-21BX16S - Manuals

JVC AV-21BX16S – Manual in PDF format online.

Manuals:

Manual

Manual JVC AV-21BX16S

Summary

Page 2 - Thank you for buying this JVC colour television.

2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO E N S U R E P E R S O N A L S A F E T Y, O B S E RV E T H E FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of th...

Page 3 - Knowing your TV’s features; Main features; II

3 Knowing your TV’s features 4 1 2 3 EXIT 5 Conﬁrm your TV’s functions Some functions written in this instruction manual may not be available for your TV. Please see the chart below and check the functions that are equipped for your TV’s model number. The model number is indicated at the rear of you...

Page 4 - Remote control buttons and basic functions; To

4 Remote control buttons and basic functions 1 6 3 7 9 5 8 2 !4 EXIT " No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and conﬁrm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME -/+...

Page 5 - Remote control buttons and basic functions (continued); How to operate menus and menus locations

5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. How to operate menus and menus locations To Operation Note Dis...

Page 6 - TV buttons and functions; Your TV may not look exactly the same as illustrated.; How to operate the menus with the TV button

6 TV buttons and functions The illustrations shown below is for AV-21BS26 and AV-29SS26 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. POWER TV/VIDEO MENU/OK CHANNEL VOLUME R V L/MON O IN(VIDEO-3) Front of the TV AV-29SS26 Rear of the TV AV-29SS26...

Page 7 - Connecting the main plug to the AC outlet.; Setting up your TV; CAUTION; • Turn off the equipment including the TV before connecting.; Connecting the aerial cable.

7 2 Connecting the main plug to the AC outlet. Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by foll...

Page 8 - Making the initial settings; PУCCKИЙ; When turn on the TV at

8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below: • Press 5 / ∞ button to select your desired language*. • Press 5 / ∞ button to select your desired Teletext language group*. For details, see page 13...

Page 9 - Basic setting for picture

9 COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. To operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE You can choose...

Page 11 - Advanced setting for picture

11 AI ECO SENSOR (ECO)/ECO MODE You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. OFF Cancel the function. MODE-1/ECO-1 Mild contrast (recommended.) MODE-2/ECO-2 Even contrast. DISPLAY (for AI ECO SENSOR only) Display the gra...

Page 12 - PIP; Original features for picture; TELETEXT

12 PIP Display the sub picture. To cancel, press the PIP button again. Notes: • You can hear the sound from the main picture only. • When main picture and sub picture are the same TV channel. Press SUB-P -/+ Main picture will be changed TV channel follow as sub picture. Press ( Input ) To change sub...

Page 13 - Original features for picture (continued); TEXT LANGUAGE

13 Original features for picture (continued) TEXT LANGUAGE You can set the Teletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group. GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian, French, Span...

Page 14 - SOUND SYSTEM; Basic setting for sound; SOUND MODE

14 SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Basic se...

Page 15 - CINEMA SURROUND; Advanced setting for sound; MaxxBass

15 CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. ON Listen to sound with wider audience effect. This function is not available when SOUND MODE is set to SOUND TURBO. To operate this function with a m...

Page 16 - DVD Menu; AUTO SIGNAL DETECT

16 DVD Menu AUTO SIGNAL DETECT When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically. And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode. Select AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choos...

Page 17 - Customized setting; VNR

17 Customized setting VNR You can reduce the picture noise. Select VNR in PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, t...

Page 18 - DISPLAY; ON OFF PR LIST; BEEP

18 Customized setting (continued) DISPLAY You can display the programme number, video terminal number and PR list on the screen. Press the DISPLAY button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLAY button to display the PR LIST. 2 Select a programme numbe...

Page 19 - TV channel presetting

19 To register the TV channels automatically (AUTO PROGRAM) You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the chann...

Page 20 - To add in the new channel

20 To add in the new channel (INSERT in the EDIT menu) You can add in new channels in the TV channel list as you like. You need to ﬁnd the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 21. 1 Display t...

Page 21 - Channel

21 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Ea...

Page 22 - Before connecting; Connecting to front video input terminals; Additional preparation; Connecting to rear component/video input; Front of TV

22 V L R R L/MONO Y C B C R /V V S OVER L R /MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT The illustrations shown in this section are for AV-21BS26 and AV- 29SS26 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the m...

Page 23 - Troubleshooting; If a problem occurs when you are using the TV, check the below

23 Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • Colour patches appear at the corner of the screen • This may due to the magnetized device such as a speaker near to your TV. Keep the device apart from your TV. Altern...

Page 24 - Specifications; TV RF systems; Receives cable channels in mid band, super band and hyper band.; Power requirements; For Australia; External input / output; Please see the table in the description “TEXT LANGUAGE” on page 13.; Please confirm with the chart on page 3.

This TV does not conform to the PAL-D Chinese broadcasting system. VICTOR COMPANY OF JAPAN, LIMITED © 2009 Victor Company of Japan, Limited 0209SCT-NF-MT Speciﬁcations TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF ...